NEXXT SOLUTIONS HAPF610 Pet Auto Feeder User Manual

June 5, 2024
Nexxt Solutions

NEXXT logoNEXXT SOLUTIONS HAPF610 Pet Auto FeederNEXXT SOLUTIONS HAPF610
Pet Auto Feeder product

List of accessories (subject to the actual product)

NEXXT SOLUTIONS
HAPF610 Pet Auto Feeder fig 1

Product Introduction

NEXXT SOLUTIONS HAPF610 Pet Auto Feeder fig
2

Operation Guide

  1. The first use
  2. Open the top cover of the feeder and remove the power cord adapter from the bucket.
  3. Plug the power cord into the power connector on the rear of the main unit and connect the adapter to power.
  4. Place the main unit in a horizontal position and the food bowl is installed at the corresponding position of the main unit.
  5. Add pet dry food to the feeder bucket.
  6. The desiccant is placed in the desiccant box by default. Please replace it regularly for long-term use (do not use cleaning)
  7. The battery compartment can be installed with 3sections of No. 1 battery for manual feeding when there is no electricity (optional)
  8. Bind the feeder to the Smart Life app to set up the feeding and planning of the pet.
  9. The function description Feed button: Short press to eat one, long press for 5 seconds to restore the factory Settings.
  10. Record button: Press and hold the “Record button” to record the sound to remind the pet to eat before Teeaing.
  11. Play button: Plays the recorded sound.
  12. Rocker switch: Feeder switch.
  13. Dry battery compartment: Three 1st batteries can be installed for pOwer supply.
  14. Bind Smart Life APP
  15. APP download and installation
  16. Scan the OR code below to download the Smart Life app and complete the installation.

**Registered APP

NEXXT SOLUTIONS HAPF610 Pet Auto Feeder fig
5**

  1. Open the Smart Life APP.
  2. Click “Create a new account”.
  3. Select the time zone to enter the account and click to get the verification code.
  4. Enter the received verification code tor verification.
  5. Set up login password and login successfully

Quick Configuration

  1. Open the APP click “add device
  2. Click Confirm dictator rapidly blink”
  3. Click”pet feeder”NEXXT SOLUTIONS HAPF610 Pet Auto Feeder fig 6
  4. password
  5. Connection
  6. Device added sucessfully and conirimNEXXT SOLUTIONS HAPF610 Pet Auto Feeder fig 7

Video Version Pet Feeder ConfigurationNEXXT SOLUTIONS HAPF610 Pet Auto
Feeder fig 8

  • Open the APP ,click “add device”-“Security& Sensor”-“Smart Camera”,enter wifi password and confirm, connecting till “device added successfully”.NEXXT SOLUTIONS HAPF610 Pet Auto Feeder fig 9

Video FeederAPP Interface Introduction

Setting

  1. Share device: share the device with others
  2. Remove device: remove device and unbind

Monitoring Screen Introduction

  1. Setting: set other fucntions
  2. Signal: Signal quality
  3. Horn: Real-time monitoring
  4. OSD/HD: switch image quality

FullscreenNEXXT SOLUTIONS HAPF610 Pet Auto Feeder fig
10

  1. Screenshot: take a picture from the video
  2. Talk: 2 way voice intercom
  3. Record: take record and save into the mobile phone
  4. Photo album: store photos
  5. Play: SD card video playback
  6. Timed feeding: delivery food at regular intervals
  7. Feeding: click to feed
  8. Alarm: motion detection alarm on/off
  9. Cloud playback: Cloud storage video playback

WiFi Feeder APP Interface Introduction

NEXXT SOLUTIONS HAPF610 Pet Auto
Feeder fig 11

Setting

  1. Share device: share the device with others
  2. Remove device: remove device and unbind

Online Feeding Introduction

  1. More setting:set up other feeder function
  2. Automatic feeding: Choose automatic feeding
  3. Feeding information: click to check feeding information
  4. Manual feeding: manual feeding online
  5. Adding timing: set up timing feeding rules

Cleaning/maintenance

After the feeder has been used for a period of time, the bowl and the bucket should be cleaned with a cleaning agent to avoid the occurrence of bacteria that affect the health of the pet due to the long time left by the food residue.NEXXT SOLUTIONS HAPF610 Pet Auto Feeder fig 11

  1. The upper showed machine parts can be removed from the main feeder and cleaned with detergent and water.
  2. The drying box in the upper cover is rotated counterclockwise to remove it.
  3. The grain drum is dismantled by rotating the “grain barrel separation switch”.
  4. The bowl is taken out by pulling down.
  5. After cleaning, it must be dried or air-dried before being assembled into a whole main feeder for use.
    • This feeder is suitable for dry foods smaller than 12 m m. Freeze- dried food is not available. Please keep the environment dry.

Attentions

  1. Please place the device correctly; prevent the pet from tipping over the device. This device is only suitable for small and medium pets under 20kg.
  2. Please replace the desiccant in the storage lid regularly. No desiccant is needed.
  3. Please keep the food bucket dry and sealed, and check regularly to ensure food residue Precautions
  4. Do not drop all substances other than pet dry food into the grain bin. Otherwise, the device may be used abnormaly or even cause pet safety problems.
  5. To prevent the pet from falling over the product, it is recommended to place the corner or against the wall.
  6. The product anti-battering line should be installed as concealed as possible to prevent the equipment from being damaged by the pet biting the wire.
  7. If children are using this device, be sure to use it under adult guidance.
  8. After installing the spare dry battery, you can manually operate the device to provide normal power supply during power failure.
  9. Regularly clean the food bucket and food bowl.
  10. This device is not recommended for young pets within three months.

FAQ

Q.The feeder is not connected, what is the problem, what to do.

  1. Check if the machine is normal: Check the status of the device indicator. After the power is turned on, the blue indicator light flashes. When the network is connected, it will be on. There will be a drop tone before the network is configured.
  2. Check if the Wi-Fi username and password are normal: Wi-Fi username and password cannot have special characters. It is recommended to use English letters + number signs.
  3. Uninstall the software and reinstall the software: Please authorize the APP to obtain the location information and access the network permissions during the installation process. Follow the above steps, and enter the correct wifi password. If you still have difficulties, please contact customer service.

Q. When connecting the feeder, sometimes it can be connected normally, sometimes not, how to deal with it.
Check if the machine’s food outlet is blocked. At this time, the blue indicator is always on.

Q. Why does the feeding time differ by tens of seconds from the current time
A. The parameters set on the APP will have an error of about 30 seconds depending on the timing of the network environment.

Q. How to quickly reconnect after the machine is disconnected.

  1. A 1: Exit the APP and re-enter, wait for the data update
  2. Switches from the feeding interface to the video interface and waits for the vide o to refresh.

Q. About SD card support capacity.

  1. A.Support 8-64G
  2. a. Feeder requirements for network type
  3. A.The feeder must use a wifi signal that satisfies the wifi 802.11bgn protocol.

(FCC) Statement

Federal Communications Commission (FCC) Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference ina residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is guarantee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turning equipment off and on, the
user is encouraged to try to correct the interference by one ormore of the following measures

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
  • Consult the dealer or an experienced radio/TV technician for help.

Warning : Changes or modifications made to this device not expressly approved by Xian ChishineOptoelectronics Technology Co., Ltd may void the FCC authorization to operate this device.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

Radiation Exposure StatementThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals