Ustellar UT88861A LED Flood Light User Guide
- June 6, 2024
- Ustellar
Table of Contents
Ustellar UT88861A LED Flood Light
Thank you for ordering from Ustellar. Set-up is easy and takes only a few
minutes by following the instructions.
Warning
- Please check if the light and the parts are intact before installation.
- Make sure to cut off power before installation.
- Please do not place this light in corrosive conditions.
- If there is any damage to the cord, please cut off the power and stop using it immediately.
- Please do not retrofit the light within the warranty period.
- To ensure the light works properly, please use the voltage indicated on the packing.
Parameters
- P/N UT88861A-DW-US-3 I UT88861A-DW-US-1
- Quantity 3-Pack I 1-Pack
- Model UT88861A
- Wattage sow
- Color Temperature SOOOK
- Dimmable No
- Max luminous Flux 80001m
- Input Voltage 120VAC
- Frequency S0/60Hz
- Waterproof Rating IP66
- Bean Angle 120·
- Working Temperature -20°C-40°C
Components
Warning: if the lighting for outdoor use, waterproof treatment should be
done at the joints.
Dimension
Installation
Step A: According to the spacing of two screw bits on the bracket, drill two holes on the mounting panel.
Note:
Maximum mounting height is over Sm.
Step B: Aim the bracket at the holes and fix it with two bolts.
Step
C : Adjust the lighting direction up or down as per your need and plug into
power the light on. 
Note: 
Make sure that the distance between the light and the
object being lits is more than 1 meter, so as to avoid high temperature caused
by short distance.
Limitation of Indoor and Outdoor Use
- This light is waterproof and dampproof. It is protected against rain, but it cannot be immersed in water.
- The mounting position of this light should be able to bear at least 10 times as heavy as the light.
- This light should be used in conditions that is good fur heat dissipation. Its working temperature should be less than 45″C Too high the working temperature will cause serious lumen depression and affect lifespan of the light.
Contact Us
Have some issue? No worries! Please reach us via these channels. Our customer services team is more than happy to help.
www.ustellar.com
@suppartustellar.com
Manufacturer: Shenzhen Ustellar Technology Ltd.
Address: C306, 3rd Floor, Building C, Youth Start-up Park, Jianshe East Road,
Tsinghua Community, Longhua Street, Longhua District, Shenzhen, China 518000