Ustellar Smart LED Flood Light User Guide

June 5, 2024
Ustellar

Ustellar Smart LED Flood Light

Smart LED Flood Light User Guide

Before installation, let’s know how the whole thing works.

Step One: Install the smart flood light.
Step Two: Fundamental set-up – Connect smart LED flood light to TechLife Pro App.
Step Three & Four: Optional set-up – Connect TechLife Pro App to Amazon Alexa or Google Assistant.
After completing Step Two, you can remote control the light on TechLife Pro App.
After completing Step Three and Four, you can voice control the light with Alexa or Google Assistant. This manual consists of Four parts.
Part One – How to install the light ? · ······················ 2 – 5 Part Two- How to pair the light to TechLife pro app? ···········6 – 11 Part Three – How to control the light with Amazon Alexa or Google Assistant? ······ ······ ······ ······ ······ ······ ········12

Part One – How to insall the light?

Warning

  1. Please check if the light and the parts are intact before installation.
  2. Make sure to cut o˝ power before installation.
  3. Please do not place this light in corrosive conditions.
  4. If there is any damage to the cord, please cut o˝ the power and stop using it immediately.
  5. Please do not retrofit the light within the warranty period.
  6. To ensure the light works properly, please use the voltage indicated on the packing.
  7.  Colour-tunable light sources that can be set to at least the colours
    Blue| 440nm — 490nm| 90%
    ---|---|---
    Green| 520nm — 570nm| 65%
    Red| 610nm — 670nm| 95%

and are intended for use in applications requiring high-quality coloured light;

  1. The luminaire is not suitable for other application including household room illumination.

Parameters

Model UT88873
Wattage 20W
Input Voltage US: AC120V
Color RGB
Frequency 50/60Hz
Waterproof Rating IP66
Bean Angle 120°
Working temperature -20~40℃

Components

Ustellar-Smart-LED-Flood-Light-02 Note: Cord – type Y attachment. For type Y attachment: If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.

Dimension

Installation

  • Step A: According to the spacing of two screw bits on the bracket, drill two holes on the mounting panel.
    Note: Maximum mounting height is over 5m.

  • Step B: Aim the bracket at the holes and fix it with two bolts.

  • Step C: Adjust the lighting direction up or down as per your need and plug in to power the light on.
    Ustellar-Smart-LED-Flood-Light-05

Note:

Make sure that the distance between the light and the object being lits is more than 1 meter, so as to avoid high temperature caused by short distance.

The light source of this Luminaire is not replaceable.
Limitation of Indoor and Outdoor Use

  1.  This light is waterproof and damp proof. It is protected against the rain, but it cannot be immersed in water.
  2. The mounting position of this light should be able to bear at least 10 times as heavy as the light.
  3.  This light should be used in condition that is good for heat dissipation. Its working temperature should be less than 45°C Too high the working temperature will cause serious lumen depression and affect lifespan of the light.

FCC ID: 2AWONUT88873
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Part Two-How to pair the light to TechLife pro app?

Before starting the paring, please make sure to turn on the Bluetooth and WiFi on your phone.
The smart light only supports 2.4GHz WiFi network, not 5.0GHz. Please make sure the working network is 2.4GHz, and your phone is connected to it. If your WiFi router supports both 2.4GHz and 5.0GHz, please separate the two frequency bands in the router seˆings, and select the 2.4GHz for connection.

  • Step A° TechLife Pro App installation
    Please choose either way below to download and install the app.

    • Scan below QR code.
      Ustellar-Smart-LED-Flood-Light-07

    • Search keyword ‘TechLife Pro’ in Apple Store or Google Play.

  • Step B° Create an account on TechLife Pro and login.
    Note: Please keep your account and password in mind for Alexa or Google Assistant App pairing later.

  • Step C° Add the lights to TechLife Pro APP

    • Tap the ‘Add device’, and choose ‘Combo mode’ to add the lights.

    • Power on the light with your own switch. Repeatedly turn on-o˝-on-o˝ -on-o˝-on switch °3 times) to activate the light into rapid blinking status. Please make sure to keep an interval over 2 seconds between each turn-on and turn-o˝. Then click ‘Confirm light blinks rapidly’.

    • Choose your WiFi network, enter your password, and click ‘Ok’.

    • Select the device, and tap the ‘Next’, it will enter the connecting progress. Note: If the network configuration failed please retry Step C.

  • Step D° Control the lights.

    •  The light will be shown on the app ‘Home’ page after successfully configured. Now you can control the lights (turn on/o˝, change color, sync music, set timer etc.) on the control page.
      Note: It is highly recommended to turn on both WiFi and Bluetooth on your phone when controlling the lights. The app will automatically select the best wireless connection mode for a better user experience.
      Tape the ‘ ’ button on the sideslip column to see the device list.

    • 2.In the device list:

    •  Click the ‘ ’ button to refresh the device connection status, and the app will automatically select able’ or ‘wifi’ connection for a better user control experience.

    • Click the ‘ ’ to select which device you want to control.

    •  Click the ‘ ’ to turn on/o˝ the light.

    •  Click the device name to enter the “Device Settings” page, here you can Rename, Share device, Unshared device, RGB Signal Sequence, Factory Reset (delete the device) etc.

    • Tap the ‘Rename’ to rename the device, and click ‘Ok’.
      Note: A simple name is recommended for easier voice recognition with Alexa or Google Assistant.

Part Three – How to control the light with Amazon Alexa or Google

Assistant?

Please make sure your Echo or Google device work well under your WiFi network.
Tap the app ‘Me’ page, tap the ‘Third party access’, and choose ‘Alexa‘ or ‘GoogleAssistant’ for step by step connection instruction.

Contact Us

Have some issue? No worries! Please reach us via these channels. Our customer services team is more than happy to help.
Website: www.ustellar.com
Email: support@ustellar.com

Manufacturer: Shenzhen Ustellar Technology Ltd.
(shen zhen shi you shi tuo ke ji you xian gong si )
Address: C306, 3rd Floor, Building C, Youth Start-up Park, Jianshe East Road, Tsinghua Community, Longhua Street, Longhua District, Shenzhen,
China 518000

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals