V-TAC VT-7463 LED Designer Surface Pendant Instruction Manual
- June 12, 2024
- V TAC
Table of Contents
V-TAC VT-7463 LED Designer Surface Pendant
Product Information
- Product Name: LED Designer Surface Pendant
- Model: VT-7463
- Watts: 3
- Lumens: Not specified
- Color: Not specified
- CCT (Dimmable): Not specified
- Beam Angle: Not specified
- Body Type: Aluminum + PC lamp body
- Input Power: AC:220-240V, 50/60Hz
- Dimension: Not specified
- Remote Control Type: 2.4G RF Remote Control
- Warranty: 3 years
Product Usage Instructions
- Before starting the installation, make sure to turn off the power.
- The light source of this luminaire is not replaceable. When the light source reaches its end of life, the whole luminaire should be replaced.
- If the external flexible cable or cord of this luminaire is damaged, it should be exclusively replaced by the manufacturer or a qualified person to avoid hazards.
- Ensure proper grounding throughout the installation.
- Installation must be performed by a certified person.
- This product is for indoor use only.
- In case of abnormal performance, switch off the power and
contact a professional technician or local dealer.
INSTALLATION DIAGRAM
Installation Instructions
- Switch off the power before starting the installation.
- Fix the ceiling plate to the ceiling with screws.
- Connect supply wires to the luminaire as displayed in the wiring diagram.
- Then fix the ceiling base to the ceiling plate with screws accordingly.
- Switch on the lamp to check the light.
Maintenance
- Clean and check the lamp regularly for safety and better performance.
- Switch off the power before cleaning.
Remote Control Instructions
Remote Control Button Functions
- TURN ON button: Turns on the lamp
- BRIGHTNESS + button: Increases brightness
- COLD LIGHT button: Not specified
- TURN OFF button: Turns off the lamp
How to Connect/Disconnect Remote Control with the Fixture
LED INDICATOR
- Match Code function: The remote control can only be used after matching code with the LED lamps. Follow the below method:
- Turn on the LED power supply.
- Long press the TURN ON button within 4 seconds at once.
- If the LED lamp flashes once slowly, it means the match code is successful. Note: The lighting fixture can only be controlled by the last successful match code.
- Clear code function: Turn off the LED power supply for 10 seconds, then turn it on. Long press the TURN OFF button within 4 seconds at once. If the LED lamp flashes twice slowly, it means the clear code was successful. Note: The clear code function is based on the fixture already having a matched code. If it is not matched, long pressing the TURN OFF button will have no effect.
TECHNICAL DATA
| Model | VT-7463 |
|---|---|
| Watts | |
| Lumens | |
| Color | CCT (Dimmable) |
| Beam Angle | |
| Body Type | Aluminum + PC lamp body |
| Input Power | AC:220-240V, 50/60Hz |
| Dimension | |
| Remote Control Type | Remote Control 2.4G RF |
INTRODUCTION & WARRANTY
Thank you for selecting and buying the V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at your best. The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of the product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
WARNING
- Please make sure to turn off the power before starting the installation.
- The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- Proper grounding should be ensured throughout the installation.
- Installation must be performed by a certified person.
- For Indoor use only
- Switch off the power in case of abnormal performance and contact a professional technician or local dealer
In case of any queries or issues with the product, please reach out to us at SUPPORT@V-TAC.EU. For more product range and inquiries, please contact our distributor or nearest dealers. V-TAC EUROPE LTD., BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B.