TUNTURI Free Stand Boxing Bag 14TUSBO073 Instruction Manual

June 6, 2024
Tunturi

TUNTURI Free Stand Boxing Bag 14TUSBO073 Instruction Manual

PARTS

  1. Base
    Parts Needed

  2. Boxing Bag
    Parts Needed

  3. Rope
    Parts Needed

Note: do not remove or throw away the padding on the inside of the base (1) when unpacking. These layers are used for isolation, it is not packaging material.

SETUP

  • Fill the base (1) with dry sand to a maximum of around 200 LB / 90 KG.
    Setup Induction

  • Put the boxing bag (2) on top of the base (1).
    Setup Induction

  • Pass the rope (3) through the boxing bag (2) and the base (1).
    Setup Induction

  • Tighten the rope and tie a knot. Put the knot inside the boxing bag.

MAINTENANCE AND SAFE USE OF THE BOXING BAG

When using the boxing bag, you should always wear padded gloves or mitts in order to avoid abrasions or other injuries. Similar protection should be used for feet, arms, and legs if the punching bag is used for kick-boxing or other similar sport. However, the boxing bag should not be used for such activities without proper instructions. The boxing bag will move when it is punched. It is therefore important to make sure that the bag is put in such a way that it will not hit walls or other items nearby. This must be done to avoid damage to the bag and to avoid that the bag causes damage to persons or animals when it is in use.

SUPPORT

Tunturi New Fitness B.V.
P.O. Box 60001
1320 AA Almere
The Netherlands
www.tunturi.com

Scan QR Code: [![QR Code](https://manuals.plus/wp- content/uploads/2021/11/08-187-300x276.jpg)](https://qrco.de/bc1PWp)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals