Shenzhen Ustellar Technology NTF77 Smart LED Flood Light User Manual
- June 6, 2024
- Shenzhen Ustellar Technology
Table of Contents
Shenzhen Ustellar Technology NTF77 Smart LED Flood Light
Instructions
- Step A: Aim the bracket at the holes and fix it with two bolts.
- Step B: Adjust the lighting direction up or down as per your need and plug in to power the light on.
- Step C: Give a name to the light.
- A simple name is recommended for easier voice recognition with Alexa or Google Assistant.
- The name given to the light will be the same for voice control on Alexa or Google Assistant.
- Step D: The named light will be shown on the app homepage. Now you can control the light(turn on/off, change color temperature, adjust brightness ect) with Smart Life on the setting page.
Choose you「WiFi network, enter your password, and tap the ‘Next’ button. Then
give a name to the light and tap the ’Done『 button.
Note: Make sure that the distance between the light and the object being lits is more than 1 meter, so as to avoid high temperature caused by short distance.
The light source of this luminaire is not replaceable.
Limitation of Indoor and Outdoor Use
FCC ID: 2AWONNTF77
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditiO9ns: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired Operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Part Two – How to pair the light to Smart Life app?
Before starting the paring, please make sure to turn on the Bluetooth and WiFi
on your phone.
The smart light only supports 2.4GHz WiFi network, not 5.0GHz. Please make
sure your working network is 2.4GHz, and your phone is connected to it. If you
WiFi router supports both 2.4GHz and 5.0GHz, please separate the two frequency
bands in the router settings, and select the 2.4GHz for connection.
-
Step A: Smart Life app installation
Please choose either way below to download and install the app.- As per your phone system, choose the QR code to scan.
- Search keyword ‘Smart Life’ in Apple Store or Google Play.
-
Step B: Create an account on Smart Life and login.
Note: Please keep your account and password in mind for Alexa or Google Assistant App pairing later. -
Step C : Add the light to Smart Life App
- Tap ‘+’ button on top right corner to add devices. Tap ‘Lighting’, then choose ‘PIR Light (BLE+Wi-Fi)’ to add the lights.
- Power on the light with your own switch. Repeatedly turn on-off-on-off-on-off -on switch (3 times) to activate the light into rapid blinking status (about 0.5s per blink). Please make sure to keep an interval over 2 seconds between each turn-on and turn-off. Then click the ‘Next’ button on this page. Find the lighting devices and click ‘+’.
- Tap ‘+’ button on top right corner to add devices. Tap ‘Lighting’, then choose ‘PIR Light (BLE+Wi-Fi)’ to add the lights.