HENDI 580011 High-Accuracy Scale Instruction Manual

: June 10, 2024
: HENDI

Table of Contents

HENDI 580011 High-Accuracy Scale
Product Information
Product Usage Instructions
Safety Instructions
Battery Safety Instructions
Preparation before use
Operating instructions
Technical Specifications
Warranty
Discarding & Environment
Documents / Resources

HENDI 580011 High-Accuracy Scale

HENDI-580011-High-Accuracy-Scale-PRODUCT

Product Information

The Large Digital Scale is equipped with an easy-to-read LCD display and has a maximum weight capacity of 3kg with a graduation of 0.1g. It is powered by 2 x 1.5V AAA batteries (not included) and can display weight in oz, lb, or g. The scale also features a timer function which can count up to 19 minutes and 59 seconds. When the batteries are running low, the display will show L0, indicating the need for replacement or recharge. Overloading the scale can cause permanent damage, and the display will show 0_Ld when overloaded.

The dimensions of the scale are 130x190x(H)25 mm, and it comes with a warranty of one year from the date of purchase.

Product Usage Instructions

Insert 2 x 1.5V AAA batteries into the battery compartment.
Place the scale on a flat and stable surface.
Press the ON/OFF button to turn on the scale.
Press the UNIT button to select the desired unit of measurement (oz, lb, or g).
Place the item to be weighed on the scale, ensuring it does not exceed the maximum weight capacity of 3kg.
The weight will be displayed on the LCD screen. If the batteries are running low, the display will show L0, indicating the need for replacement or recharge.
To use the timer function, press the T button and set the desired time using the MIN and SEC buttons. The timer can count up to 19 minutes and 59 seconds.
If the scale is overloaded, the display will show 0_Ld, indicating the need to remove some weight from the scale.

Remember to follow the instructions carefully and do not abuse or misuse the scale in any way. If you experience any issues within one year of purchase, refer to the warranty for repair or replacement options.

High-accuracy scale, up to 3 kg, with timer Hendi no. 580011

Safety Instructions

Incorrect operation and improper use of the appliance can seriously damage the appliance.
The appliance may only be used for the purpose for which it was designed. The manufacturer accepts no liability for damage as a result of incorrect operation and wrong use.
Keep the appliance away from water and any other liquids. If the appliance should accidentally fall into water, have it checked by a certified technician.
Never try to open the housing of the appliance your-self.
Do not insert any objects into the housing of the ap-pliance.
Do not use the appliance if it has been dropped or otherwise damaged. Have it checked and repaired, if necessary, by a certified repair company.
This appliance must be switched off when removing the battery.

Battery Safety Instructions

Danger of explosion! Dry batteries must not be re-chargeable or throw in the fire or short-circuited.
Do not expose batteries or appliance to extreme tem-perature such as from direct sunlight or fire. Do not place the product on a heating source.
If batteries are already leaked, remove them from the battery compartment with a clean cloth. Dispose the batteries in accordance with the provisions. Avoid to contact the leaked battery acid.
The batteries must be removed from the appliance before it is scrapped. Do not remove the build-in battery yourself! Bring the appliance to a qualified professional.
The batteries is to be disposed of safely.
CAUTION! There is a danger of explosion if the batter-ies are inserted incorrectly. Use only the same battery types. Do not use old and new batteries together and of different type from different manufacturer.
Always insert batteries in accordance (+) and (-) polar-ity as illustrated in the battery compartment.
Batteries are life-threatening if swallowed. Store all batteries out of the reach of the children. Seek medi-cal help immediately if batteries are swallowed.
Do not allow children to change batteries.
Remove the batteries when you are not going to be using the product for a long period of time. Intended use
The appliance is intended only for food weighting in professional use.
Operating the appliance for any other purpose shall be deemed a misuse of the device.
The user shall be solely liable for improper use of the device.

Large digital scale
The scale is equipped with and easy to read, ener-gy-saving LCD display.

Preparation before use

Remove all the packing material and protection film (if applicable).
Check to make sure the appliance is undamaged. In case of any damage, contact the supplier immediately and DO NOT use the appliance.
Clean the weighting platform with a slighted damped cloth.
Insert 2 x 1.5V AAA battery in the battery compartment at the back side of the appliance.
Press the “ ” button. The scale is now ready for use.

Operating instructions

HENDI-580011-High-Accuracy-Scale-FIG
2

Weighing

For optimal results, place the scale on a flat surface.
Turn on the scale by pressing the “ ” button, An “0” will appear on the display and the scale is now ready for use.
Select the desired measuring unit by pressing the “ ” button. In this way you can choose between g, oz and lb.
Set an empty bowl or container on the scale. The display will now indicate the weight of the bowl or container.
Press the “TARE” button to reset the scale to “0”.
Place the product to be weighed in the bowl or con-tainer and read its weight on the display.
You can weigh various products in the same bowl by pressing the “TARE” button after add- ing each prod-uct, which will reset the display to “0” each time. Re-member not to exceed the maximum weight of 3 kg.
Turn off the scale by pressing the “ ” button.
If you do not use the scale for 2 minutes, it will shut off automatically.

Timer function
NOTE: Counting time is up to 19 minutes and 59 seconds

Count-up:

Under “0:00” status, press “ ” button to get into count-up setting.
Press “ ” button to start, pause or resume counting.
Press “ ” button for over 3 seconds, it’ll clear.

Count-down:

Under : “0:00” status, press “ ” button for over 2 seconds to get into minutes setting.
Press “ TARE ” button or “ ” button to set minutes. Press “ TARE ” button to get into seconds setting.
Then press “ TARE ” button or “ ” button again to set-up seconds. Press “ TARE ” button to finish the setting.
Press “ ” button to start, pause or resume counting.
Press “ ” button for over 3 seconds, it’ll clear.
Beep sounds and the LCD flashes “0:00” when the time is over. Press any key to stop the warning.

Low battery
When AAA batteries are running out of power, the display will show ”L0”. Recharge replace the batteries.

Overload
Maximum weight of the scale is 3 kg, when overloaded the display will show “0_Ld”. Overloading the scale can damage the scale permanently.

Technical Specifications

Maximum Capacity: 3 kg
Graduation: 0.1g
Power: 2 x 1.5V AAA batteries (Not included)
Unit: oz / lb / g
Dimension: 130x190x(H)25 mm

Warranty

Any defect affecting the functionality of the appliance which becomes apparent within one year after purchase will be repaired by free repair or replacement provided the appliance has been used and maintained in accordance with the instructions and has not been abused or misused in any way. Your statutory rights are not affected. If the appliance is claimed under warranty, state where and when it was purchased and include proof of purchase (e.g. receipt).
In line with our policy of continuous product development we reserve the right to change the product, packaging and documentation specifications without notice.

Discarding & Environment

When decommissioning the appliance, the product must not be disposed of with other household waste. Instead, it is your responsibility to dispose to your waste equipment by handing it over to a designated collection point. Failure to follow this rule may be pe-nalized in accordance with applicable regulations on waste disposal. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.
For more information about where you can drop off your waste for recycling, please contact your local waste collection company. The manufacturers and importers do not take responsibility for recycling, treatment and ecological disposal, either directly or through a public system.

Symbols