Ustellar NTF77 Smart LED Flood Light Installation Guide

Ustellar NTF77 Smart LED Flood Light Installation Guide

Components

Note: Cord – type Y attachment.

For type Y attachment: If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.

Dimension

NTF77
Weight: 1.8Ib/0.85 kg
Max Project Area: 50 m²

NTF78
Weight: 2.91Ib/1.32 kg
Max Projected Area: 80 m²

Installation

• Step A: According to the spacing of two screw bits on the bracket, drill two holes on the mounting panel.
  Note: Maximum Mounting height is over 5m.

• Step B: Aim the bracket at the holes and fix it with two bolts.
  

• Step C: Adjust the lighting direction up or down as per your need and plug in to power the light on.
  
  Note:

Make sure that the distance between the light and the object being lits is more than 1 meter, so as to avoid high temperature caused by short distance.

The light source of this luminaire is not replaceable.

Limitation of Indoor and Outdoor Use

FCC ID: 2AWONNTF77

This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received. including interference that may cause undesired operation.

RF Exposure Information

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Part Two — How to pair the light to Smart Life app?

Before starting the paring, please make sure to turn on the Bluetooth and WiFi on your phone.

The smart light only supports 2.4GHz WiFi network, not 5.0GHz. Please make sure your working network is 2.4GHz, and your phone is connected to it. If you WiFi router supports both 2.4GHz and 5.0GHz, please separate the two frequency bands in the router settings, and select the 2.4GHz for connection.

• Step A : Smart Life app installation Please choose either way below to download and install the app.

1. As per your phone system, choose the QR code to scan.  

iOS

Android

2. Search keyword ‘Smart Life’ in Apple Store or Google Play.

• Step B: Create an account on Smart Life and login. Note: Please keep your account and password in mind for Alexa or Google Assistant App pairing later.
• Step C: Add the light to Smart Life App

1. Tap ‘+’ button on top right corner to add devices. Tap ‘Lighting’, then choose ?IR Light (BLE+Wi-Fi)’ to add the lights.  

2. Power on the light with your own switch. Repeatedly turn on-off-on-off-on-off -on switch (3 times) to activate the light into rapid blinking status (about 0.5s per blink). Please make sure to keep an interval over 2 seconds between each turn-on and turn-off. Then click the ‘Next’ button on this page. Find the lighting devices and click ‘+’.  

3. Choose your WiFi network, enter your password, and tap the ‘Next’ button. Then give a name to the light and tap the ‘Done’ button.  

• Step D: Give a name to the light.
  • A simple name is recommended for easier voice recognition with Alexa or Google Assistant.
  • The name given to the light will be the same for voice control on Alexa or Google Assistant.
• Step E : The named light will be shown on the app homepage. Now you can control the light (turn on/off, change color temperature, adjust brightness etc. ) with Smart Life on the setting page.
  

How to group the downlights?

Make sure all the lights have been paired to “smart life” app, then group the lights by following these steps.

1. Choose any light on the app, click the edit button on the top right corner, then click “Create Group” .
2. Choose the lights you want to group from the device list and rename the group.
   

Part Three — How to control the light with Amazon Alexa?

Please make sure that your Alexa app is connected to Echo, and both work well under your WiFi network.

• Step A: Log in your Alexa App, tap top left corner, and tap ‘Skills’.
  

• Step B: Type ‘Smart Life’, find ‘Smart Life’ from the search result and tap it to enable the skill.
  

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>