MiBOXER RL1-24L Rechargeable LED Wall Washer Light User Manual
- June 6, 2024
- MiBOXER
Table of Contents
RL1-24L Rechargeable LED Wall Washer Light
User Manual
Features
The light housing is made of aluminum alloy with anodizing technology on the surface, and a salinity mirror surface with high light transmittance. Widely used on building, bridge, showcase, landscape, etc.
| RGB colors to choose
---|---
| Color temperature 2700~6500K
| Dimmable Saturation control
| Waterproof and dustproof grade IP66
| Beam Angle 15*60°
| 433MHz RF LoRa spread spectrum
| Compatible with 433MHz RF Remote Controller (FUT086)
| Smartphone app control (433MHz Gateway is needed)
| Support third party voice control (433MHz Gateway is needed)
Parameters
Model No.: RL1-24L
Power: 24W
Input Voltage: AC100~240V 50/60Hz
Working Temperature: -20~60°C
Color Temperature: 2700~6500K
PF: >0.9 CRI: >80
Luminous Flux: 1800LM
Lifespan: 50000h
Beam angle: 15*60°
RF: 433MHz
Modulation Method: LoRa spread spectrum
Control Distance: 2000m
illumination Distance: >15m
IP Rate: IP66
Product Weight: 2.45kg
Model No.: RL2-48L
Power: 48W
Input Voltage: AC100~240V 50/60Hz
Working Temperature: -20~60°C
Color Temperature: 2700~6500K
PF: >0.9 CRI: >80
Luminous Flux: 3200LM
Lifespan: 50000h
Beam Angie: 15*60°
RF: 433MHz
Modulation Method: LoRa spread spectrum
Control Distance: 2000m
illumination Distance: >20m
IP Rate: IP66
Product Weight: 2.53kg
Dynamic Mode Sheet
| Number | Dynamic Mode | Brightness & Speed |
|---|---|---|
| 1 | Mardi Gras | Adjustable |
| 2 | Automatic color change | |
| 3 | Sam | |
| 4 | Gemstone | |
| 5 | Twilight | |
| 6 | American | |
| 7 | Fat Tuesday | |
| 8 | Party | |
| 9 | Slow Color Splash |
Installation Diagram
- Fix the antenna to the light body, make sure to screw it tight
- Fix the lamp body on the base, and rotate the screws.
- Select the installation place, and fix the base.
- Adjust the illuminating angle, and tighten the screws.
Connection Diagram
Link/Unlink
Compatible with “FUT086 remote control” and “WL-433 433MHz gateway” (Purchased
separately)
Lighting can be working after linking with remote; for more details, pls read
the remote or gateway instruction.
Attention
- When installation, Please switch off power, and switch on power after assuring the correct wiring.
- The light is with waterproof and damp-proof design. Waterproof rate is IP66; it can be working normally in the rain, but cannot work underwater.
- The working temperature is -20~60°C, please do not install the light on the area over 60°C to assure the lifespan.
Made in China