MiBOXER FUT087 Touch Dimming Remote Instruction Manual
- June 6, 2024
- MiBOXER
Table of Contents
Mi.Light
User Instruction
Touch Dimming Remote Model
No.: FUT087
Features
A touch dimming remote is a newly developed remote with an elegant and fashionable appearance. We use high-precision IC, touching is sensitive and stable. And we adopt a 2.4G high-frequency wireless control method with the features of low power consumption, long-distance transmitting, strong anti- interference, and fast communication rate. Working on all our brightness dimming products.
Parameters
Working Voltage: 3V(AAA Battery*2PCS)
Transmitting Power: 6dBm
Standby Power: 10uA
Working Temperature: -20~60^
Radio Frequency: 2400-2483.5MHz
Modulation Method: GFSK
Control Distance: 30m
Products Key Diagram
OFF : Short press to turn off the light; Long press to Night Light Mode.
Dimming slider : Touch adjusts 1~100% brightness.
Installation
1. Install the remote to the selected place; Keep the two screws on the same
level; Install it with the arrow up.
2. Install battery(AAA battery*2pcs), then fix it on the base.
3. Press downward and rotate to the left to fix it.
Dismantling: Rotate to the right, then pluck it down.
Linking&Unlinking
Remark: The light can be working after linking with the remote.
Linking Instructions
- Switch off the light, after 10 seconds switch on again.
- When the light is on, short press press ” ON ” 3 times within 3 seconds.
- The light blinking 3 times slowly means the linking is done successfully.
Note: If the light does not blink slowly, the linking failed, Pls switch
off the light again, and follow the above steps again.
Unlinking Instructions
- Switch off the light, after 10 seconds switch on again.
- When the light on, short press ” ON ” 5 times within 3 seconds.
- The light blinking 10 times quickly, means unlinking successfully.
Note: If the light does not blink quickly, the unlink failed, pls switch off the light again, and follow the above steps to unlink again.
Attention
- Remote only controls specified Mi-Light and MiBoxer products; not all series can work on this remote.
- In the use of the remote, if the indicated lamp blinking quickly, pls change the battery in time. Pls, don’t use the poor quality battery to avoid the leaking of battery liquid to damage the remote.
- This product is a precise electronic product; don’t use it in humid, high temperature, dust, and high voltage environment; Saving it at indoor, dry, and no static electricity environment.
- Pls don’t use the remote on the wide-range metal or strong electromagnetic wave area, otherwise, it will badly affect the controlling distance.
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>