MiBOXER DP3 DALI RGB+CCT Dimming Panel Instruction Manual
- June 6, 2024
- MiBOXER
Table of Contents
MiBOXER DP3 DALI RGB+CCT Dimming Panel
Features
Use DALI standard protocol IEC62386. DALI bus give power; easily setting address. Support single address mode, group address mode; Compatible with RGB, RGBW and RGB+CCT output mode to control the ON/OFF, Brightness, color and saturation.
Parameters
DALI RGB+CCT dimming panel
- Model No.: DP3
- Power Supply: DALI Power
- DALI Bus Standard: IEC62386
- Standby Current: 5mA
- Working temperature: -20~60℃
- Product Weight: 138g
- Dimming Channel: RGB or RGBW or RGB+CCT
Color ring
Touch Color Ring,Choose the color you want.
Dimming slider
Touch Dimming Slider to change the brightness from 1~100%.
White mode
Press “W”,Switch to White Light status.
Saturation/CCT slider
Adjust saturation under color light mode; adjust color temperature under white
light mode.
Connection Diagram
Dip Switch Operation
Via dip switch, you can set 64 single address(0~63), 16 group address (0~15).
Address value= the sum of the DIP Switch value(to get the place value when in
“ON” position, otherwise it wil be 0).
Address / Group corresponding value diagram
Note: There is no broadcast mode with DALI RGB+CCT dimming Panel
Installation / Dismantling
Attention
When installation, pls handle with care to avoid the broken of the glass
panel.
Setting RGB Output mode
i.e: Under single address mode, set the initial address to 35
After setting initial address, it will creat corresponding address automatically.
| Group Address | 35 | 36 | 37 |
|---|---|---|---|
| Controlled Colors | Red | Green | Blue |
i.e: Under group address mode, set the initial address to 5
After setting initial address, it will creat corresponding address automatically.
| Group Address | 5 | 6 | 7 |
|---|---|---|---|
| Controlled Colors | Red | Green | Blue |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>