Ustellar B099Z9V3KM Smart Monitor Light Bar User Guide
- June 6, 2024
- Ustellar
Table of Contents
Ustellar B099Z9V3KM Smart Monitor Light Bar User Guide
Thank you for ordering from Ustellar. Set-up is easy and takes only a few minutes by following the instructions.
The smart light can work with both Amazon Alexa and Google Assistant. But the light after being installed will need to be paired with an app called ‘Smart Life’ first, and then the Smart Life app will need to be bound with either Amazon Alexa or Google Assistant to activate the voice control function. Therefore, this user guide consists of four parts. Part one and two are fundamental set-up, while part three and four are alternatives. If you use Amazon Alexa for voice control, please follow instructions on part one, two and three. If you use Google Assistant for voice control, please skip part three, follow the instructions on part one, two and four.
Part One – How to install the light?
Warning
- Please check if the light and the parts are intact before installation.
- Make sure to cut off power before installation.
- Please do not place this light in corrosive conditions.
- If there is any damage to the cord, please cut off the power and stop using it immediately.
- Please do not retrofit the light within the warranty period.
- To ensure the light works properly, please use the voltage indicated on the packing.
1. Parameters
2. Components
3. Product Description
-
RGB Light ON/OFF Button:
Short Press to power the RGB light ON/OFF.
Long Press 5 seconds to reset the lamp for APP connection. -
RGB Mode Switch Button:
Press to switch between 4 working mode: Gradient mode, Symphony mode, Adjoin mode, Classic Music mode. -
Color Temperature Switch Button:
Press to switch between 3 color temperature of white light: 2700K(Warm Light), 4000K(Neutral Light), 6S00K(Cool Light). -
White Light Brightness Button:
Press to adjust the white light brightness (circularly): 1%, 20%, 40%, 60%, 80%, 100%. -
White Light ON/OFF Button:
Press to power the white light ON/OFF.
4.lnstallation
Part Two – How to pair the light to Smart Life app?
Before starting the paring, please make sure to turn on the Bluetooth and WiFi on your phone.
The smart light only supports 2.4GHz WiFi network, not 5.0GHz. Please make sure your working network is 2.4GHz, and your phone is connected to it. If you WiFi router supports both 2.4GHz and 5.0GHz, please separate the two frequency bands in the router settings, and select the 2.4GHz for connection.
Step A: Smart Life app installation
Please choose either way below to download and install the app.
(1) As per your phone system, choose the QR code to scan.
https://itunes.apple.com/cn/app/smart-life-smart- living/id1115101477?l=enhttps://play.google.com/store/apps/details?id=com.tuya.smartlife
(2) Search keyword ‘Smart Life’ in Apple Store or Google Play.
Step B: Create an account on Smart Life and login.
Note: Please keep your account and password in mind for Alexa or Google
Assistant App pairing later.
Step C: Add the light to Smart Life App
- Tap’+’ button on top right corner to add devices. Tap ‘Lighting’, then choose ‘PIR Light (BLE + Wi-Fi)’ to add the lights.
- Power on the lamp. Long Press the RGB Light ON/OFF Button button on the front panel) for S seconds, to activate the RED light into rapid blinking status, the lamp will be reset. Then click the ‘Next’ button on this page.
- Choose your WiFi network, enter your password, and tap the ‘Next’ I button. Then give a name to the light and tap the ‘Done’ button.
Step D: Give a name to the light.
– A simple name is recommended for easier voice recognition with Alexa or
Google Assistant.
– The name given to the light will be the same for voice control on Alexa or
Google Assistant.
Step E: The named light will be shown on the app homepage. Now you can control the light (turn on/off, change colors, adjust brightness ect) with Smart Life on the setting page.
Part Three – How to control the light with Amazon Alexa?
Please make sure that your Alexa app is connected to Echo, and both work well under your WiFi network.
Step A: Log in your Alexa App, tap top left corner, and tap ‘Skills’ .
Step B: Type ‘Smart Life’, find ‘Smart Life’ from the search result and tap it to enable the skill.
Step C: Enter your Smart Life App account and password. Tap ‘Link Now’, then tap ‘Authorize’ on the next page to bind Smart Life account to Alexa.
Step D : When your Smart Life account is bound to Alexa, tap ‘DISCOVER DEVICES’ to detect the light.
Step E: When the named light is paired to Alexa from Smart Life, it will show on the device page (see the ‘smart light’ example).
Step F : Now you can control the light with Alexa App on the setting page. To turn on or off the light, simply tap the bulb icon.
Step G : You can also voice control the light with Alexa by giving these commands: “Alexa, turn on ‘device name’ “, “Alexa, set ‘device name’ to ‘color'”, “Alexa, set ‘device name’ to ‘number'”. Device name is the one you give to the light. The light is named ‘smart light’ in this user guide. For example, “Alexa, turn on ‘smart light'”, etc.
Note: To control the light with Google Assistant, please continue to read Part Four.
Part Four – How to control the light with Google Assistant?
Step A: Login Google Assistant App, tap ‘Home Control’ on the left side
bar page.
Step B: Tap’+’ button on the bottom right to enter next page.
Step C: Find ‘Smart Life’ from side bar list .
Step D: Enter your Smart Life App account and password to bind Smart Life account to Google Assistant.
Step E: You will find the named light shows on the Home Control page. Now you can control the light on Google Assistant App, or voice control it by giving these commands: “ok Google, turn on ‘device name’ “, “ok Google, set ‘device name’ to ‘color'”, “ok Google, set ‘device name’ to ‘number'”.
Device name is the one you give to the light. The light is named ‘smart light’ in this user guide. For example, “ok Google, turn on ‘smart light'”.
FCC ID: ZAJK8-LMB54
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
https://www.ustellar.com/pages/ustellar-smart-monitor-light- bar-e-manual
MADE IN CHINA
Documents / Resources
|
Ustellar B099Z9V3KM Smart Monitor Light
Bar
[pdf] User Guide
B099Z9V3KM, Smart Monitor Light Bar
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>