PROLED L2026xx CABINET E-Serie LED Light User Manual
- June 6, 2024
- PROLED
Table of Contents
PROLED L2026xx CABINET E-Serie LED Light
Preface
Thanks for choosing PROLED CABINET E Series. Before installation and use, we strongly recommend you to read this manual carefully. If the device has been damaged during transport, please report this to your supplier immediately. Please don’t take any action without contacting your supplier first.
Limited Warranty
In case of quality problems we provide free repair or replacement within one year from the day of purchase, if this product has been used properly in accordance with the user’s manual, except in following cases:
- Any defects caused by wrong operation.
- Any damages caused by unauthorized removal, maintenance, modifying, incorrect connection and replacement of chips.
- Any damages due to transportation, vibration etc. after purchase.
- Any damages caused by earthquake, fire, lightning, pollution and abnormal voltage.
- Any damages caused by negligence, inappropriate storing at high temperatures and humidity or near harmful chemicals.
- Product has been updated
Safety Warnings
- Please don’t install this luminaire during thunderstorms, intense magnetic or high-voltage electrical fields. To reduce the risk of component damage and fire caused by a short circuit, make sure, that all connections are correct.
- Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
- Check voltage and power requirements of the luminaire as well as the polarity of the power supply.
- Never connect any cables while power is on and always assure correct connections to avoid short circuits before switching on.
- Never attempt any repairs yourself; otherwise, the manufacturer’s warranty will be void.
- For update information please consult your supplier.
Product Description
PROLED CABINET E-Series is a perfect illumination for showcases, display cases
as well as under cabinet light. It will be switched on and off by a touch
dimmer or motion sensor. Adjustable mounting set allows to choose luminaire
angle 0°, 45° and 90°. Easy connection, as well as the intuitive usage, round
up a positive appearance of the product.
Technical Data
- Modell : PROLED CABINET E-Series
- Input voltage: DC 24 V
- Power consumption: 6 W / 8,5 W / 17 W
- Ambient temperature: – 10°C – 45°C
- Dimensions: 33 x 9,5 mm (B x H), Länge 300 mm / 500 mm / 1.000 mm
- Net-weight: 130 g / 220 g / 440 g
Specifications
- Nearly stepless dimming (optional)
- Turn on and off by motion sensor (optional)
- Turnable in 3 angles ( 0°, 45°, 90°)
- Maximum quantity per power input 3 m
- Detection distance of the motion sensor (optional) is 3 m
Dimensions
Luminaire
Motion sensor
Installation manual
- Carefully open the mounting plate
- Rotate the mounting plate to 90° and fix it with M3x10 screws.
- Clip-in back luminaire into mounting plate
Connection diagram
Connection possibility 1 with connector cable or linear connector (plastic connector)
Connection possibility 2 with motion sensor
Adjustment
Luminaire angle
Position of the luminaire can be easily adjusted in angles of 0°, 45° or 90°.
ATTENTION: Luminaire can’t be adjusted more than 90°.
Motion sensor angle
The position of the motion sensor (0°, 45°, or 90°) defines the detection area.
Usage
Touch dimmer function:
At first switch on or after removing of power supply, the luminaire will go to
100% brightness, when the switch button is pressed shortly (<550 ms). The
luminaire can be switched on and off with a short pressure of the switch
button.
First long (>550 ms) pressure on the switch button, during luminaire is on,
will gradually increase brightness. If touch time is longer than 3 Seconds,
the luminaire goes to maximum brightness.
Following long pressure on the switch button, during luminaire is on, will
gradually decrease brightness. If touch time is longer than 3 Seconds, the
luminaire goes to minimum brightness.
As long as the power supply isn’t interrupted, the luminaire keeps the
existing dimming at switching off and goes with the same at switching on. If
the power supply is interrupted, the luminaire goes to factory default at the
next switching on.
Motion sensor function
As soon as persons enter the detection area of the motion sensor, it activates
the power supply and the luminaire will be switched on. When persons leave the
detection area or they do not move, the light will be turned off after a delay
time of 30 seconds (delay can be adjusted between 30 seconds and 3 minutes).
As long as persons move during the delay time, the luminaire will remain on.
The motion sensor can be adjusted at 0°, 45°, and 90°.
ATTENTION
Due to high sensitivity of the motion sensor, it is not recommended to use it
in the following or similar conditions:
- Rapid environmental changings
- Strong shock or vibration
- Behind obstructions (eg. glass) which IR cannot pass
- Direct sunlight
- Direct wind from the heater or air condition
REMARK TO ENERGY EFFICIENCY CLASS
This product contains a light source of energy efficiency class G.
ATTENTION
Installation and commissioning may only be performed by qualified persons.
National installation regulations must be observed.
Luminaires must be disconnected from mains before any work.
The contained light source can not be exchanged in the luminaire.
Technical amendments reserved
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg – Germany
www.proled.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>