MONDAINE 5030.D Cushion Watch Instruction Manual
- June 6, 2024
- MONDAINE
Table of Contents
MONDAINE 5030.D Cushion Watch
Specifications
- Product Name : Cushion Ronda Startech
- Movement Caliber: 5030.D & 5021.D
- Languages: English, Deutsch, Francais, Italiano
Product Usage Instruction
Description of the Display and Control Buttons
The display shows the time, date, and chronograph functions. Control
buttons are used to set the time, and date, and operate the chronograph.
Setting the Time
To set the time, press the designated button for time setting and use the
other buttons to adjust the hours and minutes accordingly.
Setting the Date (Quick Mode)
For quick date setting, follow the instructions provided in the manual to
ensure accurate adjustment.
Setting the Date/Time Following a Battery Change
After changing the battery, refer to the manual to correctly set the date
and time to synchronize with the new battery.
Chronograph Basic Function (Start/Stop/Reset)
Use the designated buttons to start, stop, and reset the chronograph
function as needed.
Chronograph Accumulated Timing
The chronograph can accumulate timing for various activities. Refer to the
manual for detailed instructions on this function.
Chronograph Intermediate or Interval Timing
This function allows for timing intervals during activities. Follow the
manual for precise usage instructions.
Adjusting the Chronograph Hands to Zero Position
To reset the chronograph hands to zero position, perform the necessary
steps outlined in the manual.
Description of the display and control buttons
Setting the time
- Pull out the crown to position Ill (the watch stops).
- Turn the crown until you reach the correct time 8:45.
- Push the crown back into position I.
Please note
To set the time to the exact second,
- 1 must be pulled out when the second hand is in position «60».
- Once the hour and minute hands have been set, 3 must be pushed back into position I at the exact second.
Setting the date (quick mode)
- Pull out the crown to position Il (the watch continues to run).
- Turn the crown until the correct date appears.
- Push the crown back into position I.
Please note
During the date-changing phase between approx. 9 PM and midnight the date must
be set to the date of the following day.
Setting the date/time following a battery change
Example:
- Date/time on the watch:
- Present date/time:
- 17/ 1 : 25 AM
- 4/ 8:30 PM
- Pull out the crown to position Il (the watch continues to run).
- Turn the crown until yesterday’s date appears [3
- Pull out the crown to position Ill (the watch stops).
- Turn the crown until the correct date 4 appears.
- Continue to turn the crown until the correct time 8:30 PM appears.
- Push the crown back into position I.
Please note:
During the date changing phase between approx. 9 PM and midnight the date must
be set to the date of the following day.
Chronograph
Basic function
(Start/ Stop/Reset)
Example:
- Start : Press push-button A.
- Stop: to stop the timing, press push-button A once more and read the chronograph hands: 1h / 20min/ 38 sec.
- Zero positioning:
Press push-button B.
(The chronograph hands will be reset to their zero positions.)
Chronograph
Accumulated timing
Adjusting the chronograph
hands to zero position
Example:
One or several chronograph hands are not in their correct zero positions and
have to be adjusted (e.g. following a battery change).
- Pull out the crown to position Ill (all chronograph hands are in their correct or incorrect zero position.)
- Keep push-buttons A and B depressed simultaneously for at least 2 seconds (the second counter hand rotates by 360° → corrective mode is activated. )
WARNING: KEEP THE BATTERY OUT OF REACH OF CHILDREN The battery can cause serious injuries if swallowed or placed inside any part of the body. Seek medical attention immediately.
Since 2020, Mondaine Group (including all brands) is one of the first watch
companies worldwide to be comprehensively CO2 neutral for scope 1,2,3 of the
GHG protocol. Reduce, Reuse, Recycle.
Registered models. All rights reserved and defended by the manufacturer and
the Swiss Government authorities. All wristwatches are Swiss made by online
Watch Ltd, Etzelstrasse 27, 8808 Pfäffikon, Switzerland
MORE INFORMATION
- T +41 (0)58 666 88 00 |
- info@mondaine.ch
- www.mondaine.ch
FAQ
- Q: How do I change the language on the display?
- A: The language settings are pre-set and cannot be changed on the display. The watch supports multiple languages for user convenience.
- Q: What should I do if the chronograph hands do not reset to zero?
- `A: If the chronograph hands do not reset properly, carefully follow the zeroing instructions in the manual to ensure correct alignment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>