MONDAINE stop2go Movement Watch Instruction Manual

MONDAINE stop2go Movement Watch

Product Specifications

• Movement: Stop2go
• Display: Hour hand, Minute hand, Second hand
• Origin: SWISS MADE

Product Usage Instructions

Part 1: Aligning the Hands (Optional)

1. Press and hold the time setting pen for a long push to activate hand aligning mode. The second hand will start moving.
2. Align the second hand by following the movement.
3. Press and hold the push corrector for a long push to switch to minute aligning mode. Align the minute hand.
4. Press and hold the push corrector for a long push to switch to hour aligning mode. Align the hour hand.
5. Once all hands are aligned, press and hold the push corrector for a long push to switch back to time setting mode.

Part 2: Setting the Time

1. Press the time setting pen once for a short single push to enter hour time setting mode. The hour hand will start moving.
2. To adjust the hour hand, press the push corrector accordingly.
3. Set the hour hand to the desired time.
4. Press and hold the push corrector for a long push to switch to minute setting mode. The minute hand will start moving.
5. Adjust the minute hand by pressing the push corrector as needed.
6. Set the minute hand to the desired time.
7. Make a long push on the push corrector to exit the setting mode.

Frequently Asked Questions (FAQ)

• Q: Do I need any special tools to align or set the hands on the watch?
  A: No, you can align and set the hands using the time setting pen and push corrector provided with the watch.

• Q: How long do I have to set the time before the setting mode expires?
  A: The setting mode is available for 30 seconds before it expires if left untouched.

Description of the display and control buttons

PART 1
Aligning the hands (optional)
The hands are currently aligned in production, but it is important to note that they can be easily realigned by following the steps below:

1. First, press and hold with the “time setting pen” for a long push to activate the hand aligning mode. This activates the second hand, which will start moving.
2. To move the second hand, press the push corrector once for a short single push. The second hand will move forward by ¼ of a second. If you need to move the second hand forward by ten seconds, press the push corrector twice for a double push. Continue adjusting the second hand until it is aligned with the 12 o’clock index.
3. Once the second hand is properly aligned, press and hold the push corrector for a long push to switch to the minute aligning mode. The minute hand will begin moving.
4. To move the minute hand, press the push corrector once for a short single push. The minute hand will move forward by ¼ of a minute. If you need to move the minute hand forward by ten minutes, press the push corrector twice for a double push. Keep adjusting the minute hand until it is aligned with the 12 o’clock index.
5. After aligning the minute hand, press and hold the push corrector for a long push to switch to the hour aligning mode. The hour hand will start moving.
6. To move the hour hand, press the push corrector once for a short single push. The hour hand will move forward by ¼ of an hour. If you need to move the hour hand forward by two hours, press the push corrector twice for a double push. Adjust the hour hand until it is properly aligned with the 12 o’clock index.
7. Once all three hands are aligned by following the order mentioned above, press and hold the push corrector for a long push to switch back to the time setting mode. You can then adjust the time as needed by following step 2.

PART 2 Setting the time

1. Press with the “time setting pen” once for a short single push the push corrector to enter the hour time setting mode. The hour hand will start moving. Note that the setting mode is available only for 30 seconds if you do not touch it.
2. To move the hour hand, press the push corrector once for a short single push. The hour hand will move forward by one hour. If you want to move the hour hand forward by three hours, press the push corrector twice for a double push.
3. Set the hour hand to the desired time by pressing the push corrector until you reach the desired hour.
4. After setting the hour hand, press and hold the push corrector for a long push to switch to the minute setting mode while you are still in the setting mode. The minute hand will start moving.
5. To move the minute hand, press the push corrector once for a short single push. The minute hand will move forward by one minute. If you want to move the minute hand forward by ten minutes, press the push corrector twice for a double push.
6. Set the minute hand to the desired time by pressing the push corrector until you reach the desired minute.
7. After setting the minute hand, make a long push on the push corrector to exit the setting mode or wait for 30 seconds.
   Congratulations, you have successfully set the time on your watch!

Note : The ‘time setting pen’ is available for ordering online.

Registered models. All rights reserved and defended by the manufacturer and the Swiss Government authorities. All wrist watches are Swiss made ondaine Watch Ltd, Etzelstrasse 27, 8808 Pfäffikon, Switzerland T +41 (0)58 666 88 00 | info@mondaine.ch www.mandaina.ch

References

• Mondaine Schweizer Bahnhofsuhren

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>