MONDAINE stop2go Swiss Railways Watch Instruction Manual
- June 6, 2024
- MONDAINE
Table of Contents
MONDAINE stop2go Swiss Railways Watch
Specifications
-
Model: Mondaine stop2go
-
Features: Electronic switch, hour and minute hands, backlit
display -
Certification: GGM.D046 ED. 04/24
-
Manufacturer Website: www.mondaine.ch
Product Usage Instructions
Time Setting
- Pull the switch element to position 1. The second-hand moves to noon and stands still.
- Turn the switch element in the desired direction (clockwise or counterclockwise) until the hands show the correct time.
- For fine-tuning, rotate the switch in single pulses to adjust the minute hand step by step.
- Push the switch element back to position 0 once the time setting is completed.
Backlight Usage
To activate the backlight feature, press the electronic switch (crown) as a
push button. This will illuminate the watch dial for improved visibility in
low-light conditions.
KEY
- Switch (crown)
- Hour hand
- Minute hand
Important information
- Instead of a conventional crown the Mondaine stop2go is equipped with an electronic switch. This switch can be rotated in both directions.
- It also serves as a push button for function control and re-set of the second hand. For time setting the switch element can be pulled out to position 1.
Time setting (Hour and Minute)
- Pull the switch element to position 1.
- The second-hand moves to noon and stands still.
- Turn the switch element in the wished direction (clockwise or anti-clockwise) and keep it in this position until the hands are showing the correct time.
- For fine-tuning rotate in single pulses on the switch (clockwise or anti clockwise), the minute hand will move step by step.
- Push the switch element back to position zero once the time setting is completed.
Reset of the second hand – to stop at 12 o’clock position
- In case the second hand is misaligned and does not stop at noon push the switch for 3 seconds to activate the correction mode.
- Turn the switch element anti-clockwise (do not pull out the switch – it must remain in zero position). The second-hand starts moving forward.
- For quick setting keep it in the turned position, for fine tuning just give short individual impulses on the switch. When the second hand has arrived at noon push on the switch to confirm the standard mode.
WARNING: KEEP THE BATTERY OUT OF REACH OF CHILDREN
The battery can cause serious injuries if swallowed or placed inside any part
of the body. Seek medical attention immediately.
Registered models. All rights reserved and defended by the manufacturer and the Swiss Government authorities. All wristwatches are Swiss made Ondaine Watch Ltd, Etzelstrasse 27, 8808 Pfäffikon, Switzerland
- T +41 (0)58 666 88 00
- [email protected]
- www.mondaine.ch
Since 2020, Mondaine Group (including all brands) is one of the first watch companies worldwide to be comprehensively CO2 neutral for scope 1,2,3 of the GHG protocol. Reduce, Reuse, Recycle.
FAQ
- Q: How do I reset the second hand?
- A: To reset the second hand, push the electronic switch (crown) to perform a function control and reset of the second hand.
- Q: Can I rotate the switch element in both directions?
- A: Yes, the switch element can be rotated in both clockwise and counterclockwise directions for time setting and adjustments.