MONDAINE Stop2go Movement Watches Instruction Manual

: May 15, 2024
: MONDAINE

Table of Contents

MONDAINE Stop2go Movement Watches
Product Information
Product Usage Instructions
Description of the display and control buttons
Setting the time
Documents / Resources

MONDAINE Stop2go Movement Watches

MONDAINE-Stop2go-Movement-Watches-PRODUCT

Specifications

Brand: Mondaine
Model: GGM.D082
Movement: stop2go
Language: English
Features: Hour, minute, and second hands
Origin: Swiss Made

Product Information

The Mondaine GGM.D082 watch features the innovative stop2go movement, designed for precise timekeeping.
With a classic design and Swiss precision, this watch is a blend of style and functionality.
The watch display includes hour, minute, and second hands, along with a push corrector for easy adjustment of the time.

Product Usage Instructions

Part 1: Aligning the Hands (Optional)

Press and hold the time setting pen to activate hand aligning mode. The second hand will start moving.
Align the second hand first, then switch to minute aligning mode by pressing and holding the push corrector.
Repeat the process for aligning the hour hand.
Once all hands are aligned, switch back to time setting mode by pressing and holding the push corrector.

Part 2: Setting the Time

Press the push corrector once to enter the hour time setting mode. The hour hand will start moving.
Adjust the hour hand by pressing the push corrector accordingly.
Switch to the minute setting mode by pressing and holding the push corrector after setting the hour hand.
Adjust the minute hand using the push corrector.
Exit the setting mode by making a long push on the push corrector or wait for 30 seconds.

FAQ

Q: How often should I align the hands of my watch?

A: The hands are usually aligned during production. You may need to realign them only if there is a significant deviation in timekeeping.

Q: Can I order the time-setting pen separately?

A: Yes, the time-setting pen is available for ordering online for your convenience.

Q: Is the Mondaine GGM.D082 water-resistant?

A: The water resistance level may vary, please refer to the product specifications or contact customer support for more information.

Description of the display and control buttons

Aligning the hands (optional)

The hands are currently aligned in production, but it is important to note that they can be easily realigned by following the steps below:

First, press and hold with the “time setting pen” for a long push to activate the hand aligning mode. This activates the second hand, which will start moving.
To move the second hand, press the push corrector once for a short single push. The second hand will move forward by ¼ of a second. If you need to move the second hand forward by ten seconds, press the push corrector twice for a double push. Continue adjusting the second hand until it is aligned with the noon index.
Once the second hand is properly aligned, press and hold the push corrector for a long push to switch to the minute aligning mode. The minute hand will begin moving.
To move the minute hand, press the push corrector once for a short single push. The minute hand will move forward by ¼ of a minute. If you need to move the minute hand forward by ten minutes, press the push corrector twice for a double push. Keep adjusting the minute hand until it is aligned with the midnight index.
After aligning the minute hand, press and hold the push corrector for a long push to switch to the hour-aligning mode. The hour hand will start moving.
To move the hour hand, press the push corrector once for a short single push. The hour hand will move forward by ¼ of an hour. If you need to move the hour hand forward by two hours, press the push corrector twice for a double push. Adjust the hour hand until it is properly aligned with the noon index.
Once all three hands are aligned by following the order mentioned above, press and hold the push corrector for a long push to switch back to the time-setting mode. You can then adjust the time as needed by following step 2.

Setting the time

Press the “time setting pen” once for a short single push of the push corrector to enter the hour time setting mode. The hour hand will start moving. Note that the setting mode is available only for 30 seconds if you do not touch it.
To move the hour hand, press the push corrector once for a short single push. The hour hand will move forward by one hour. If you want to move the hour hand forward by three hours, press the push corrector twice for a double push.
Set the hour hand to the desired time by pressing the push corrector until you reach the desired hour.
After setting the hour hand, press and hold the push corrector for a long push to switch to the minute setting mode while you are still in the setting mode. The minute hand will start moving.
To move the minute hand, press the push corrector once for a short single push. The minute hand will move forward by one minute. If you want to move the minute hand forward by ten minutes, press the push corrector twice for a double push.
Set the minute hand to the desired time by pressing the push corrector until you reach the desired minute.
After setting the minute hand, make a long push on the push corrector to exit the setting mode or wait for 30 seconds.

Congratulations, you have successfully set the time on your watch!
Note: The ‘time setting pen’ is available for ordering online.
Registered models. All rights reserved and defended by the manufacturer and the Swiss Government authorities.
All wristwatches are Swiss-made by Ondaine Watch Ltd, Etzelstrasse 27, 8808 Pfäffikon, Switzerland
T +41 (0)58 666 88 00 1info@mondaine.ch
www.mondaine.ch