BASS JAXX HP-0556 Wireless and Wired Kid Safe Headphone Instruction Manual

BASS JAXX HP-0556 Wireless and Wired Kid Safe Headphone

Introduction

Congratulations, and thank you for choosing the 2IN1 Wireless and Wired Kid Safe Headphones. This manual will help you operate the 2IN1 Wireless and Wired Kid Safe Headphones, but firstly you should familiarize yourself with the Bluetooth functionality of your mobile phone or ther devices before using the 2IN1 Wireless and Wired Kid Safe Headphones.

Safety Rules

1. Please follow the rules depicted in this manual closely to ensure your safety. Before using these Bluetooth headphones, we would strongly encourage you to read through this user manual.
2. Be warier of any edges, uneven surfaces, metal parts, accessories and its packaging so as to prevent any possible injury or damage.
3. Do not modify, repair or dismantle these Bluetooth headphones. Doing so may result in fires, electric shocks, complete breakdown of these Bluetooth headphones, etc. All are not covered under warranty.
4. Do not use an diluent or volatile liquid to clean the Bluetooth headphones.
5. Do not use the Bluetooth headphones in a hazardous location.

Packaging Contents

• 1 X 2IN1 Wireless and Wired Kid Safe Headphones
• 1 X 3.5mm Aux-in Cable
• 1 X Micro USB Charging Cable
• 1 X loslructloa Maa,al

Includes:
l(One} Headphones 6.1 in. x6.7in. x 2.Sin. (15.6cm x 17.1cm x 7cm) l(One} 3.5mm Aux-in Cable
l(One) Charging Cable 9.Sin. / l(One) Instruction Manual

Connection Diagram

How to use

• How to use Enter the pairing  mode
  Press and hold the On / Off Button for 3 seconds. After turning on, the LED IndIcator flashes red/blue

• Pairing
  Use a mobile phone with Bluetooth function or other Bluetooth devices to perform necessary pairing action After pairing, the LED indicator slowly blinks with blue

• Turn off
  Press and hold the On / Off Button for3seconds

• Charging

• Plug the Micro USB to the Micro USB port. When charging, the LED indicator turns red. After full charging, the LED indicator turns off

• Answering a Call
  Press On I Off button to answer phone call, press On I Off button again to end call Prnss and hold 2 seconds to reject call Double dick to redial last call

• Play/ Pause
  Press On/ Off button to play music and press ii again to pause music

Pairing to Mobile phone or other device
To use your Bluetooth headphones, you must first pair your headphones with a mobile phone another Bluetooth device. Once your Bluetooth headphones is paired to a specific mobile
phone, they will remain paired and automatically recognize each other whenever they are within range.

Pairing to a phone and Entertainment:

• Turn on your phone and ensure the Bluetooth function is activated.
• Turn on the headphones, enter the pairing mode.
• Search your Bluetooth devices on your phone by following the phone’s instructions. Refer to your phone’s user manual for more information.
• After a few seconds, the phone will list the “BT KID HP” as a discovered device. Select it and follow your phone’s instructions to select this pairing.
• Your phone will confirm the pairing and then press Yes/OK.

Charging your headphones

For your safety, please always use an appropriate 5V input charger/Adapter to charge the product. DO NOT USE Quick Charging USB Adapter to charge the product, as it might damage the product. Use the Micro USB charging cable accessory provided with these headphones. Connect the Micro USB plug to the Micro USB charging port on the headphones positioned at (D in headphones diagram on page 2. Connect the USB plug to a USB port on a computer or wall adapter to activate charging.
Make sure to keep the headphones charging for a minimum of 2 hours before initial use. Warning:**

• You must select a qualified charger from a regular manufacturer.
• You must charge the Bluetooth headphones if it has not been used for more than 6 months.

Product Specification

Driver Diameter: 40 mm
Impedance: 32 Ohms
Frequency Response: 20 Hz – 20K Hz
Sensitivity: 85dB +/- 3 dB
Battery Capacity: Li-ion Battery 3. 7 V 160 mAh
Playtime: 4-5 Hours
Charging Time: 2 Hours
Bluetooth Range: 32.8 Feet
Charging Method: Micro USB Charging
Product Dimensions:
6.14 x 6.73 x 2.76 in. (15.6 x 17.1 x 7 cm.)

FAQ

1. Why is there no power even when the headphones is turned on?
   Ans: Ensure the battery has been charged up to 1 hour for initial use.

2. There is no sound when playback.
   Ans: Check the connection between headphones with phone or computer, if the connection is not established, please connect again. Make sure the headphones is paired and connected with your target phone or other master device.

FCC Statment

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>