Ustellar UT33330-WW-US-NF Tunable White Light Strip User Guide

Ustellar UT33330-WW-US-NF Tunable White Light Strip

THANK YOU for choosing Ustellar. To optimize the user experience, please use the product according to the following instructions.

Warning

1. Winding lighting is prohibited, as it affects heat dissipation and might cause dangers.
2. Please unroll the light strip from the plate before lighting it up.
3. Please check if the light strip and the parts are intact before using them.
4. Please make sure that the power supply is turned off before installation.
5. Please use the attached power adapter only, to ensure that the light works properly.
6. Please do not use this light in the open air or in humid environments.

Specifications

P/N

| UT33365-CW-US-NF UT33365-CW-UK-NF UT33365-CW-EU -NF| UT33366-CW-US-N F UT33366-CW-UK-NF UT33366-CW-EU-NF
---|---|---

Model

| UT3336S-CW-US-NF UT33365-CW-UK-NF UT33365-CW-EU-NF| UT33366-CW-US-NF UT33366 -CW-UK-NF UT33366-CW-EU-NF
Wattage| 24W| 24W
length| 6m / 20ft| 12m/40ft
LED Quantity| 672LE□s| 1344LE□s
Color Temperature| 3000K+6000K
Color| Warm White+Oaylight
LED Type| 2835
Input Voltage| 100-240V AC
Frequency| 50/60Hz
Working Voltage| 24V DC
Beam Angle| 120″
Working Temperature| -2s·c~4o•c

PackageIncludes

| ****

LED Strip x 1, Controller Cable x 1, Power Adapter xl, Fasteners

Components

Note: Power Adapter Cord – type Z attachment. For type Z attachment: The cable or cord cannot be replaced without breaking or destroying the luminaire.

LED Signal Receiver

Instruction for Controller

Installation

• How to cut the LED strip?
  Before cutting the LED strip, please keep these in mind.

  • Once the strip is cut, an extra connector is needed for reconnection, otherwise, the rest part being cut can not work. The connector is not included in the package. You may contact the seller for the connector details.
  • Double confirm the length for installation before making the cut.
  • Cut the strip along with the marks.

• How to install the LED strip?

  • Choose an even and smooth surface.
  • Sweep the dust off the surface.
  • Tear the back sheet.
  • Press the strip with force.
  • Fasten the strip with clips, if applicable. (It is recommended to use the clip every 0.5m.)
    

• Connect the light strip to controller cable@, and then connect the controller cable to the power adapter Plug the adapter into the socket and turn on the light strip by pressing ‘ON’ button on the RF remote controller.
  
  Note:

  • If the strip can’t light up after the installation, please check whether the joints are connected correctly.
  • Please make sure to turn off the power supply during routine maintenance.
  • To avoid any damage to the strip, please do not use chemical solvent during routine maintenance.

How to pair the Strip light to Smart Life app?
Before starting the paring, please make sure to turn on the Bluetooth and WiFi on your phone.

1. Step A: Smart Life app installation.
   Please choose either way below to download and install the app.

   • Scan the QR code below to download the “Smart Life” App.

   • Search keyword ‘Smart Life’ in Apple Store or Google Play.

2. Step B: Create an account on Smart Life and log in.
   Note: Please keep your account and password in mind for Alexa or Google Assistant App pairing later.

3. Step C: Add the light strip to Smart Life App. This smart light strip only supports 2.4GHz Wifi network, not 5.0 GHz. Please make sure your Wifi network is 2.4GHz, and your phone is connected to the required Wifi network.

4. Power on the light strip and long press the power button on the controller until the light strip blinks.

5. Tap’+’ button on top right comer to add device, then tap ‘lighting ‘ to enter next page.

6. Choose ‘Light Source(Wi-Fi)’ or ‘Strip Lights(Wi-Fi) ‘ and follow the instructions of the app to complete the pairing process.

7.  You can also enable ‘bluetooth’ on your phone and try the ‘Auto Scan’ for automatic pairing.

How to control the Strip light with Amazon Alexa?
Please make sure that your Alexa app is connected to Echo, and both work well under your WiFi network.

• Step A: Log in to your Alexa App, tap top left comer, and tap ‘Skills’ .

• Step B: Type ‘Smart Life’, find ‘Smart Life’ from the search result and tap it to enable the skill.
  

• Step C: Enter your Smart Life App account and password. Tap ‘Link Now’, then tap ‘Authorize’ on the next page to bind Smart Life account to Alexa.

• Step D: When your Smart Life account is bound to Alexa, tap ‘DISCOVER DEVICES’ to detect the Strip light.
  

• Step E: When the named Strip light is paired to Alexa from Smart Life, it will show on the device page (see the ‘smart strip light’ example ).

• Step F: Now you can control the strip light with Alexa App on the setting page. To tum on or off the strip light, simply tap the bulb icon.

• Step G: You can also voice control the strip light with Alexa by giving these commands: “Alexa, tum on ‘device name’•, “Alexa, set ‘device name’ to ‘number'”. Device name is the one you give to the Strip light. The strip light is named ‘smart strip light’ in this manual. For example, “Alexa, tum on ‘smart strip light’ “, etc.
  Note: To control the strip light with Google Assistant, please continue to read Part Four.

How to control the Strip light with Google Assistant?

• Step A: Login to Google Assistant App, tap ‘Home Control’ on the left side bar page.

• Step B: Tap’+’ button on the bottom right to enter next page.

• Step C: Find ‘Smart Life’ from sidebar list.
  

• Step D: Enter your Smart Life App account and password to bind your Smart Life account to Google Assistant.

• Step E: You will find the named strip light shown on the Home Control page. Now you can control the strip light on Google Assistant App, or voice control it by giving these commands: “ok Google, turn on ‘device name'”  “ok Google, set ‘device name’ to ‘number'”.
  The device Name is the one you give to the strip light. The strip light is named ‘smart strip light’ in this manual. For example, “ok Google, tum on ‘smart strip light’ “etc.
  

Contact Us: Have some issue? No worries! Please reach us via these channels. Our customer services team is more than happy to help. www.ustellar.com  support@ustellar.com

Manufacturer: Shenzhen Ustellar Technology Ltd. (shenzhen shi you shi tuoke ji you xian gong si )
Address: Rm.201, A Bldg., No. A Qianhai 1st Rd., Shen’gang Cooperation Zone, Qianhai, Shenzhen, CHINA 518000

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>