Ustellar ut88870 LED Rechargeable Flood Light User Guide
- June 6, 2024
- Ustellar
Table of Contents
Ustellar ut88870 LED Rechargeable Flood Light
[
](http://120.25.194.109/files/down/CShine/index.html)
LED RGB Flood Light User Guide
THANK YOU for choosing Ustellar. To optimize user experience, please install and use the light according to the following instruction.
Warning
- Please check if the light and the parts are intact before installation.
- Make sure to cut off power before installation.
- Please do not place this light in corrosive conditions.
- If there is any damage to the cord, please cut off the power and stop using ii immediately
- Please do not retrofit the light within the warranty period.
- To ensure the light works properly, please use the voltage indicated on the packing.
- To avoid any damage to the light, please do not use chemical solvent during rounline maintenance.
Specification
Model No. | UT88870-RGB-US | UT88870-RGB-UK | UT88870-RGB-EU |
---|---|---|---|
Wattage |
25W
Color|
RGB
Input Voltag e|
AC100-240V
Protection Rating|
IP66
Controlled By|
APP
Frequency|
50/60Hz
Mercury Content|
No
Lifespan|
50000H
Working Temperature|
-2s 0 -40°c
Components
Note: 1. Different plugs for different countries.
2. Cord – type Z attachment.
For type Z attachment, if the external cord of this luminaire is damaged, it
cannot be replaced without breaking or destroying the luminaire.
Dimension
UT88870-RGB
Weight: 1.1lb/0.5kg
Max Projected Area: 20m2
Suggested Height for Installation: 5m
Installation
Step A: According to the spacing of two screw bits on the bracket, drill
two holes on the mounting panel.
Step B: Aim the bracket at the holes and fix it with two bolts.
Step C : Adjust the lighting direction up or down as per your need and
plug in to power the light on.
Note:
01 Make sure that the distance between the light and the object being lit is more than 1 meter.so as to avoid high temperature caused by short distance.
Non-replaceable Light Source.
Limitation of Indoor and Outdoor Use
- This light is waterproof and dampproof. It is protected against the rain, but it cannot be immersed in water.
- The mounting position of this light should be able to bear at least 10 times as heavy as the light.
- This light should be used in condition that is good for heat dissipation. Its working temperature should be less than 40° “C. Too high the working temperature will cause serious lumen depression and affect lifespan of the light.
How to control the RGB flood light?
- Download the App “Shine Light” by scanning the QR code below.
This App is compatible with Android 4.0 and iOS 8.1 or above.
****| Android 4.0
---|---
****| iOS 8.l - Power on the light.
- Activate the Bluetooth function on your phone and open the App to connect to the light.
- Enjoy the lighting by exploring the functions such as brightness, modes, music sync, timer etc via the App.
If you cannot control the lamp with the app, please Itry:
- Turn off the Bluetooth function on your phone,and turn it on again.
- Power on the lamp again, keep your phone to the lamp as close as possible and try to reconnect.
Why the app shows that the lamp status is connected,but I still cannot
control the lamp with the app?
- Keep your phone to the lamp as close as possible.
- The app can only control four lamps at one time, if there are over 4 lamps, it may fail to control them.
Contact Us
Have some issue? No worries! Please reach us via these channels. Our customer services team is more than happy to help.
www.ustellar.com
support@ustellar.com
Manufacturer: Shenzhen Ustellar Technology Ltd.
(shen zhen shi you shi tuo ke ji you xian gong si )
Address: Rm.201, A Bldg., No. A Qianhai 1st Rd., Shen’gang Cooperation Zone,
Qianhai, Shenzhen, CHINA518000
Documents / Resources
|
Ustellar ut88870 LED Rechargeable Flood
Light
[pdf] User Guide
ut88870 LED Rechargeable Flood Light, ut88870, LED Rechargeable Flood Light
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>