Ustellar UT88870-RGB LED Flood Light Outdoor App Control User Guide
- June 6, 2024
- Ustellar
Table of Contents
LED RGB Flood Light User Guide
Please scan the QR code below to download APP —”Shine Light”.
http://120.25.194.109/files/down/CShine/index.html
THANK YOU for choosing Ustellar. To optimize user experience, please install and use the light according to the following instruction.
Warning
- Please check if the light and the parts are intact before installation.
- Make sure to cut off the power before installation.
- Please do not place this light in corrosive conditions.
- If there is any damage to the cord, please cut off the power and stop using it immediately.
- Please do not retrofit the light within the warranty period.
- To ensure the light works properly, please use the voltage indicated on the packing.
- To avoid any damage to the light, please do not use chemical solvent during routine maintenance.
Specification
Model No. | UT88870-RGR-US | UTR88711-RGB- UK | UT88870-RGB-EU |
---|---|---|---|
Wattage | 25W | ||
Color | RGB | ||
Input Voltage | AC100-240V | ||
Protection Rating | IP66 | ||
Controlled Ry | APP | ||
Frequency | 50/60Hz | ||
Mercury Content | No | ||
Lifespan | 50000H | ||
Working Temperature | -25°∼40°C |
Components
Note:
- Different plugs for different countries.
- Cord – type Z attachment. For type Z attachment, if the external cord of this luminaire is damaged, it cannot be replaced without breaking or destroying the luminaire.
Dimension
UT88870-RGB
Weight: 1.11b/0.5kg
Max Projected Area: 20m’
Suggested Height for Installation: 5m
Installation
Step A: According to the spacing of two screw bits on the bracket, drill two holes on the mounting panel.
Step B: Aim the bracket at the holes and fix it with two bolts. Step C: Adjust the lighting direction up or down as per your need and plug into power the light on.
Note:
Make sure that the distance between the light and the object being lit is more
than 1 meter,so as to avoid high temperature caused by a short distance.
Non-replaceable Light Source.
Limitation of Indoor and Outdoor Use
- This light is waterproof and dampproof. It is protected against rain, but it cannot be immersed in water.
- The mounting position of this light should be able to bear at least 10 times as heavy as the light.
- This light should be used in a condition that is good for heat dissipation. Its working temperature should be less than 40° C . Too high the working temperature will cause serious lumen depression and affect the lifespan of the light.
How to control the ROB floodlight?
- Download the App “Shine Light” by scanning the QR code below. This App is compatible with Android 4.0 and iOS 8.1 or above.
- Power on the light.
- Activate the Bluetooth function on your phone and open the App to connect to the light.
- Enjoy the lighting by exploring the functions such as brightness, modes, music sync, timer, etc via the App.
If you cannot control the lamp with the app, please try:
- Turn off the Bluetooth function on your phone, and turn it on
- Power on the lamp again, keep your phone to the lamp as close as possible and try to reconnect.
Why the app shows that the lamp status is connected, but I still cannot control the lamp with the app?
- Keep your phone to the lamp as close as possible.
- The app can only control four lamps at one time, if there are over 4 lamps, it may fail to control them.
Contact Us
Have some issues? No worries! Please reach us via these channels. Our customer
services team is more than happy to help.
www.ustellar.com
support@ustellar.com
Manufacturer: Shenzhen Ustellar Technology Ltd.
Address: Rm.201, A Bldg., No. A Qianhai 1st Rd.,
Shenyang Cooperation Zone,
Qianhai, Shenzhen, CHINA 518000
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>