ANRAN S02 IP Camera with Battery User Manual
- June 6, 2024
- ANRAN
Table of Contents
Wireless battery camera User Quick Manual
Dear Customer, thank you for choosing Anran products! to have a better
operation we suggest you read the User Manual first and keep it for future
reference
If any questions please contact us by email to our support team for help.
Introduction
Reset button/SD Card Slot/Micro USB Port
SO Card Port: Support micro SD card for local storage (Max 128G8). Reset
button: Used to restore the camera to factory settings (Press and hold on
5.8s).
Download the ARCM/ APP
Download “CCTV” from Google Play /App
Store or Scan the following QR Code onto your Mobile Phone.
https://play.google.com/store/apps/details?id=com.generalcomp.arcctv
https://itunes.apple.com/us/app/arcctv/id1376487513?mt=8
Register an account
- Open the “CCTV” APP to register an account. Go to the login interface then click “Register” (Figure 1)
- Register with your phone number or email address, click “Confirm”, a verification code will be sent to your phone or email box (Figure 2)
- Input the verification code and set a password for the app account, click “Confirm” to complete (Figure 3)
Set up WiFi for the camera
Step. Put both of your mobile phone and camera near the router, and the
distance should be 5-10m.
Step2. Log in to “CCTV”, then tap the “+” icon in the center. Tap “Other ways
to add”, select “Add battery camera” to add a device. Step3. Reset the
device and wait for the device indicator to flash and proceed to the next
step;
Step4. Click “Remote View”,and choose the Wi-h the device needs to connect
with (your home Wi-Fi), input the password, and click ‘Next”.
Steps5. Using the device to scan the QR code on the mobile phone according to
the operation the figure shows, then proceed to the next step after hearing
the prompt tone.
Step6. After the network configuration is successful, set the name and
password for the device to add successfully, then you can view the camera
screen.
Device Storage
The camera supports up to 128GB Micro TF card. Please format the card after inserted. When the Card is full, it will overwrite and loop recording.
Remote Playback
- Click the “Playback” button to enter the playback interface;
- Select “TF card recording”, drag the timeline to select the time period;
- Click ” ” to select the date.
Motion detection alarm
With the function on, the App will push an alarm message to you when a motion is triggered. Click “Settings’ and choose “Motion Detection recording”, turn on the “Motion detection”, “Motion Recording” and “Enable motion detection notifications”
Functions
News: Tap to view alarm messages. Please go to Me > Settings to turn on the
Push Notification.
Playback: Tap to view the videos recorded.
Window: Change the number of channels displayed on the screen.
SD: Switch the image quality between SD and HD. SD is the default setting and
is recommended for smooth streaming.
| Light control: Adjust the infrared lights mode of cameras.
---|---
Microphone: Can press and hold Microphone to start the intercom.
PIZ: Can Pan and Zoom the cameras come with this system.
Screenshot: Tap to capture a screenshot to the App. Please go to the Main
interface > Screenshot to check.
Sound: Turn on/off the sound from the camera.
Recording: Tap to start recording the live video; tap again to end and save It
Into the App.
Intercom: Tap to start talking with people near the NVR. Press and hold the
icon to talk; press the icon to hang up.(Note: If this feature can’t work, the
cameras you ordered don’t have this feature)
Thanks again, if there are any issues, please don’t hesitate to contact us by
sending an email to our support team so we can do our best to Resolve Them.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance 20cm between the radiator & your body.