ANRAN S1 Security Cameras Wireless Outdoor 2K Solar Security WiFi Camera User Guide

June 12, 2024
ANRAN

ANRAN S1 Security Cameras Wireless Outdoor 2K Solar Security WiFi Camera

ANRAN S1 Security Cameras Wireless Outdoor 2K Solar Security WiFi
Camera

Product Introduction

Product Introduction
Product Introduction

CAUTION: Please Insert the Micro SD Card according to the direction shown In the diagram. Micro SD Care might JAM if inserted incorrectly and device could be damaged.
SD Card Port: Support micro SD card for local storage (Max 1 28GBi
-Re,s.e t button: Used to restore the camera to factory settings (Press and hold on Card capacity requirements: 8-128GB.
R.ad and write speed requirement : class 10 level.
FIle format: FATil.

APP Installation and Account Registration

Download”ANRAN”APP

Method 1 : Download”ANRAN”APP from APP Store (iOS) or Play Store {Android);
Method 2: Scan”ANRAN”APP QR code to download it.

|
---|---
|

  Tips: Please turn on 2 permissions below when use this APP at the first time.

  1. Allow”ANRAN”APP to access mobile cellular data and wireless LAN, or ii will be foiled to odd IP camera.
  2. Allow”ANRAN”APP to receive pushed message. or the cell phone will not receive alarm push when moll on detection or audible alarm is triggered.
Register Account

New users need to register by e-mail, click”Register”, and follow the steps to complete the registration ofthe account. then log in.

Note:

  • When registering a new account, please choose the region which you ore actually in. {Different registered regions can’t share the camera.)
  • Please choose lo register by e-mail.

How to Add Camera to APP

Warming Tip: Please insert the Micro SD card before power on, otherwise, the SD card can not be detected.

Power on Camera
  • Please long press the power button for 5s to power the camera.
  • The indicator with red light blinking slowly means the camera is started successfully.
Connect the Camera

Put the camera and smart phone l lo 3 feel (30 lo 100 cm) away from the router to set Wi-Fi.

Warming Tip:

  • The camera only supports 2A-GHz Wi-Fi. and doesn’t support 5GHz WIFI.
  • Please ensure that the Wi-Fi signal strength is to be over than 85%; if the camera is for away from the signal source, it won’t be connected successfully for the first time.

WI-Fl Connectlon Steps:



PIR Motion Detection Settings

Enter the application – “Parameter Setting” – “Motion Detection” interface.

Sens!Hvity Detecting Distance (For moving objects)
Level 1-3 {Low) Up to 4-5 meters
Level 4-7 {Med) Up lo 5–8 meters
Level 8–10 {High) Up to 8-13 meters

  Warm Tlps:

  • When you encounter the missed or delayed alarm frequently in using this camera, you can adjust the motion detection sensitivity to solve them.
  • If you notice the poor performance of motion detection in the night environment, try to tum off “Night Detection”.

Product Specification

Resolution 2MP/3MP/SMP@12-1Sfps
Storage TF Card {max. 128GB), Cloud Storage
Wi-Fi Only 2.4GHz
Infrared LEDs 850nm
waterproof IP65
OS IOS {>8); Android (>4.2)
Wi-Fi Standards IEEE 802.11 b/g/n
Power 5VlA
Working Temp & Humidity -20’c-50’c  (-4°F 122°F) <90%   (no  condensation)

FAQs

1) The device prompts offline?

  • Check whether the equipment is in the power-on state. and observe whether the working light of the equipment is on normally.
  • Check whether the Wi-Fi network is in good condition and restart the router.
  • If the device is locale far away from the router, which results in the inability to obtain a good WiFi signal, ii is recommended to move the router to a closer place or add a Wi-Fi amplifier to improve the Wi-Fi performance of the home.
  • Delete the camera from your AN RAN account and add ii again after resetting the device.
  • Check whether the device firmware and application program are the latest version

2) Update router or Wi-Fi password?

Delete the camera from your AN RAN account.
After reselling the device, use the new Wi-Fi and password to add it again.

3) Can’t play historical video?

  • Check the status of the SD card in “Settings” to ensure that the SD card has been successfully recognized.
  • Reinsert the SD card.
  • In the application. format the SD card.
  • Try another new SD card

4) Why doesn’t the device identify the SD card?

  • Please insert the Micro SD card before power on;
  • II is recommended to use San Disk, Samsung and other brand cards;
  • II is recommended to use a standard class l O TF card;
  • Only FAT32 format is supported.
  • TF card can’t be identified when the internet environment is not good.

5) Why the battery lite of my device is poor?

  • Please check whether the number of alarms is too frequent. Because the working time of the device determines the battery life. The more frequent PIR wake-ups, the faster the battery consume due to the longer working time. II is recommended to appropriately lower the motion detection sensitivity of the device and set the alarm interval and alarm lime plan. (Note: Outdoor air conditioning units. moving cars and the passing  pedestrians will cause frequent alarms. Please adjust the angle of the device to avoid these objects.)
  • In cold weather. the battery capacity will be reduced, which will affect the endurance of the device.

6) The phone cannot receive the alarm push?

  • Tum on all the push permissions of the “AN R application in the system settings of your mobile phone.
  • Make sure that the device’s motion detection function is successfully turned an.
  • Restart the phone, and clear the cache on Android phones.
  • Check whether the network is good.

7) Haw to judge whether the charging is successful?

The device’s charging indicator light is red, which means it is charging. A blue light means that charging is complete. It will take approximately l O hours or more to fully charge.

8) What should I do If the charge falls?

  • Determine whether the power adapter is good, try another one.
  • Determine whether the USB charging cable is good, try another one.
  • The charging indicator may be defective, please check the charging condition in the phone APP.
  • Determine whether the charging port of the device is not in good contact with the USB charging cable.
  • The device has a low temperature charging protection module, please don’t charge the device at low temperatures.

Warranty Tips

Please fill in the following information or scan QR code to activate the free 12-month warranty from the orderdate on.
After finish filling or sea nning, please take a picture and send it to the ema il(support@anran-cctv.com).
Then your free warranty will take effect!
During the warranty period, lf any parts of product are damaged, please contact us immediately and we will provide satisfactory resolution.

Contact us

 www.anran-cctv.com
support@anran-cctv.com
 1-866-958-6988 (US) 44-2086101559 (UK)

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals