fitrus sp02 smart band User Guide

User Guide

1. Start using
2. Basic functions
3. Reminder function
4. Impermeabilita
5. Attro

Start using

The Citrus Band is a smart device that can analyze multiple data such as Sp02. scientific sleep, activity, heart rate, and blood pressure and provide call reminders and message pushes.
1.1 Charging, turning on/off
To charge the Citrus Band, remove straps on both sides, plug the blue connector into the USB port on your computer or plug it into the charger.
Power on Press the touch sensor below the display and hold for a few seconds to turn on the Citrus Band.
Power off Go to the power-off screen and press the touch sensor and hold to turn off the Citrus Band.

Notes

• Please charge the Citrus Band by inserting the blue connector into the USB metal direction. The charging icon is displayed when charging starts normally.
• Make sure to connect the device property and if the charging icon does not appear on the display, please try reconnecting it.

1.2 Download and install the APP
Scan the OR code to download it directly or search
Fitrus in Boogie Play Store or Apple App Store.

https://thefitrus.com/app/

1.3 Connect the device to your mobile phone
Start the Citrus Applhereinafter called App) and set up your account, profile, and other data according to the Citrus App guides.
1.4 Basic operation
Simply press the touch sensor and move to different screens.

Basic functions

2.1 The Citrus Band can record data such as daily activity, sleep, heart rate, blood pressure, and blood oxygen saturation through the equipped sensors.
2.2 The Citrus Band can automatically detect your daily activity data(steps, distance, calories burned, etc.). You may check them on the activity screen.
2.3 The Citrus Band can automatically collect your sleeping pattern. Check your sleep quality on the Citrus Band. After manually turning on the scientific sleep mode, more diverse steep patterns such as naps or irregular breaks (ex. night shift schedules) can be analyzed.
2.4 The Citrus Band supports heart-rate/blood pressure measurement. Press the touch sensor to move to the heart-rate/blood pressure screen and start testing.
2.5 The Citrus Band supports Run mode. Press the touch sensor to move to the Run mode screen. Press and hold the touch sensor to begin Run mode.
2.6 On the Citrus Band screen, you can only see the basic data. For more detailed data, sync the Citrus Band with our App. (Measured data is stored on the Citrus Band for 3-5 days. Connect to the App every day to prevent data loss.)

Notes

• If the user’s skin is too dry, it is suggested to apply a gel, or lotion, or put a hot towel on your wrist for a while for proper measurement.

• The measurement may not be accurate if you speak during the measurement.

• When the scientific sleep mode is turned on. more precise measurements are required to collect PPG signals. So please wear the Citrus Band tight enough, allowing only one finger to fit inside the band so that the rear sensor of the Citrus band can fully touch your wrist.

• There are some instances where the signal is too weak to measure the blood oxygen saturation data. At this time, for more accurate measurements, please remove the Fitrus Band and place your finger directly on the sensor at the back of the device to start measurement.
  Place your finger directly on the sensor for accurate measurement.

• Make sure that the sensor touches your wrist properly to measure heart rate, blood pressure, and blood oxygen saturation data. If the Citrus Band is too loose or too tight on your wrist, it may affect the measurement results.

• Keep relaxing and do not speak while measuring heart rate, or blood pressure. You can activate or deactivate the auto-measurement feature from the Citrus App settings menu.

• Regular sleep monitoring techniques are based on the activity instead of the physical feature index of the body. The data is just a reference to reflect general status. Sleep and wake-up status are recognized by various time and pattern data. Lying down quietly may be captured as a sleeping status.

• The Citrus Band is made of harmless materials, so it is safe to wear it daily. If is any skin irritation occurs due to an allergy, environmental factors, or any other factors, stop using your Band and consult your doctor immediately.

• The Citrus Band is not a medical device. Please use the data as a reference.

Reminder function

3.1 Call reminder
The Citrus Band vibrates to remind the incoming calls on your mobile phone. You can mute or reject the call through your device.
3.2 Message push When a new message is received on your mobile phone, the Citrus Band will vibrate to remind you and shows the message on the screen.

Notes

• The Citrus Band’s call/message notification function works only when connected to a mobile phone.
• Please enable the notification function on your mobile phone and turn on the message notification function of the Citrus App.

Water resistance

4.1 The Citrus Band has been tested in a controlled environment and certified to be water-resistant in specific situations and conditions.
4.2 The water resistance function may deteriorate over time.
4.3 Suggested using in occasions washing hands, rainy days, and playing in the shallow water area. Stop using it while taking a hot shower, diving, surfing, etc. as
Notes
The following circumstances may damage the water-resistance feature of the Citrus Band.

• Avoid dropping, hitting, or any physical damage.
• Avoid leakages from soap water and shower gel. detergent. perfume. lotion, oil. etc.
• Do not use the device while taking a hot bath, spa, or under any kind of high temperature/moistful occasion.

4.4 It is beyond our warranty scope if the damage was caused by the liquid leakage.

More

For more operation details, please refer to the help page on Citrus App.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>