100724 Ellipse Compact Meridian System User Guide

: July 31, 2024
: MERIDIAN

Table of Contents

100724 Ellipse Compact Meridian System
Product Information
Specifications
Product Usage Instructions
1. Getting Started
2. Unpacking the Ellipse
3. Using the Control App
- FAQ
Q: How do I connect my Ellipse to a network?
Q: Can I use the Ellipse with both Apple and Android

100724 Ellipse Compact Meridian System

Product Information

Specifications

Product Name: Meridian Ellipse
Type: Wireless Streaming Speaker
Audio Inputs: USB, Analogue, Optical Digital
Control App: Meridian Control App

Product Usage Instructions

1. Getting Started

The Ellipse can be controlled in a variety of ways. The primary
methods of control are from the control panel on the top of the
unit and, if your Ellipse is connected to a network, from the free
Meridian Control app.

2. Unpacking the Ellipse

The Ellipse is packed within an inner box which is protected by
an outer carton. The packaging has been designed to be reusable, so
you may want to retain it for transporting the product in the
future.

Remove the inner carton from the outer box.
Remove the top packing piece.
Lift the Ellipse out of the packaging and carefully remove it
from its cloth bag.
Remove the power cable and Quick Start Guide from the
packaging.

3. Using the Control App

The Meridian Control app provides access to the full range of
control and set-up features of Ellipse. It is recommended to
download and use the app to enjoy the full benefits of this
advanced product.

FAQ

Q: How do I connect my Ellipse to a network?

A: To connect your Ellipse to a network, follow these steps:

Open the Meridian Control app on your device.
Select the option to connect a new device.
Follow the on-screen instructions to connect your Ellipse to
your Wi-Fi network.

Q: Can I use the Ellipse with both Apple and Android

devices?

A: Yes, the Meridian Control app is available for download on
Apple devices from the Apple App Store and on Android devices from
the Google Play Store.

1
MERIDIAN ELLIPSE USER GUIDE

CONTENTS

01
INTRODUCTION
04
MERIDIAN CONTROL APP
07
USING THE CONTROL APP
10
CONFIGURING WITH THE CONTROL APP

02
GETTING STARTED
05
CONNECTING ELLIPSE TO A NETWORK
08
OTHER CONTROL METHODS
11
SPECIFICATION

03
UNPACKING THE ELLIPSE
06
ELLIPSE CONTROLS & FEATURES
09
STREAMING AUDIO SETUP
12
TRADEMARKS & LICENSING

3
1. INTRODUCTION

MERIDIAN ELLIPSE is a high-performance, all-in-one, wireless streaming speaker. It is capable of extremely high-quality sound reproduction from wireless music streaming as well as other audio sources.

ABOUT THE MERIDIAN ELLIPSE Ellipse features Bluetooth® wireless technology and it supports network streaming over Wi-Fi or via a wired connection to its Ethernet socket.

PRODUCT REGISTRATION Register your Meridian Ellipse at: meridian-audio.com/my- meridian

Bluetooth streams audio directly from a phone, tablet or computer to Ellipse. However, Ellipse also supports streaming services that use an app running on a phone, tablet or computer as a control interface, while the audio itself is streamed over the network. Streaming over the network in this way provides many advantages, including the ability to continue streaming while you use your phone for calls or other tasks. Also, such services offer potential for higher quality sound while, generally speaking, using less of your phone’s battery power.

Ellipse also supports auxiliary inputs via a USB audio socket as well as a combined analogue and optical digital audio socket.

The Meridian Control app provides access to the full range of control and set- up features of Ellipse, so we recommend that you download and use the app to enjoy the full benefits of this advanced product.

SALES AND SERVICE All direct support for Meridian products, systems and associated software is provided through our authorised distribution network. If you require any such advice or information, you should contact your Meridian dealer.

01
INTRODUCTION

GETTING STARTED

UNPACKING THE ELLIPSE

MERIDIAN CONTROL APP

CONNECTING ELLIPSE TO A NETWORK

ELLIPSE CONTROLS &
FEATURES

USING THE CONTROL APP

OTHER CONTROL METHODS

STREAMING AUDIO SETUP

CONFIGURING WITH THE
CONTROL APP

SPECIFICATION

TRADEMARKS & LICENSING

4
2. GETTING STARTED

Care should be taken when unpacking Ellipse see instructions in the next section of this guide. If the unit is placed on a hard surface, it should only ever rest on the three feet mounted on its underside. This applies even while the unit is wrapped within its protective cloth bag.

Your Ellipse can be used without any additional set-up for playing audio by using Bluetooth® wireless technology or from sources connected to the inputs on its back-panel. However, many more features are available when the Ellipse is connected to your network via either Wi-Fi or a wired connection. Once connected to your network, Ellipse can play audio from various streaming services, as detailed in this guide.

Ellipse can be controlled in variety of ways. The primary methods of control are from the control panel on the top of the unit and, if your Ellipse is connected to a network, from the free Meridian Control app.

INTRODUCTION

02
GETTING STARTED

UNPACKING THE ELLIPSE

MERIDIAN CONTROL APP

CONNECTING ELLIPSE TO A NETWORK

ELBLI-LPISNEK CONTROLS &
FEATURES

USING THE CONTROL APP

OTHER CONTROL METHODS

STSRPEACMIFINCAGTION AUDIO SETUP

CONFIGURING WITH THE
CONTROL APP

SPTERCOIFUIBCLAETSIHOONOTINGTRADEMARKS & LICENSING

3. UNPACKING

5

The Ellipse is packed within an inner box which is protected by an outer carton. The packaging has been designed to be reusable, so you may want to retain it for transporting the product in the future.

STEP 1 Remove the inner carton from the outer box.

STEP 2 Remove the top packing piece.

STEP 3 Lift the Ellipse out of the packaging and carefully remove it from its cloth bag.

STEP 4 Remove the power cable and Quick Start Guide from the packaging.

INTRODUCTION

GETTING STARTED

03
UNPACKING THE ELLIPSE

MERIDIAN CONTROL APP

CONNECTING ELLIPSE TO A NETWORK

ELBLI-LPISNEK CONTROLS &
FEATURES

USING THE CONTROL APP

OTHER CONTROL METHODS

STSRPEACMIFINCAGTION AUDIO SETUP

CONFIGURING WITH THE
CONTROL APP

SPTERCOIFUIBCLAETSIHOONOTINGTRADEMARKS & LICENSING

4. MERIDIAN CONTROL APP

6

The Meridian Control app supports a full range of control and set-up features of your Ellipse, so it is recommended that you download and use the app.
KEY FEATURES OFFERED BY THE APP · It provides the primary method for connecting Ellipse to Wi-Fi.

· It gives you control of volume level and allows you to select between listening to streamed audio from your Ellipse and any external sources connected to the product’s analogue, optical or USB audio inputs.

· It allows access to your Ellipse’s additional audio features, such as treble and bass.

· Configuration options within the app provide flexibility for you to customise the behaviour of your Ellipse to your preferences.

· It can display cover art and other playback details from streamed material (this feature is dependent on the streaming service in use).

· It provides the playback controls (Play, Pause, etc.) offered by the streaming service.

DOWNLOADING THE MERIDIAN CONTROL APP The Meridian app is available for download on Apple devices from the Apple App Store and on AndroidTM devices from the Google Play Store. In either case search for Meridian to find the app or scan the QR code shown here:
The app runs on devices using iOS or iPadOS.

INTRODUCTION

GETTING STARTED

UNPACKING THE ELLIPSE

04
MERIDIAN CONTROL APP

CONNECTING ELLIPSE TO A NETWORK

ELBLI-LPISNEK CONTROLS &
FEATURES

USING THE CONTROL APP

OTHER CONTROL METHODS

STSRPEACMIFINCAGTION AUDIO SETUP

CONFIGURING WITH THE
CONTROL APP

SPTERCOIFUIBCLAETSIHOONOTINGTRADEMARKS & LICENSING

7
5. CONNECTING ELLIPSE TO A NETWORK

The Meridian Ellipse offers great flexibility, enabling it to be connected in several ways.
5.1 CONNECTING ELLIPSE TO WI-FI USING THE MERIDIAN CONTROL APP When Ellipse is used for the first time, it automatically advertises itself wirelessly so it can be found by the Meridian Control app running on a smartphone or tablet that has Bluetooth switched on.*

5.3 CONNECTING ELLIPSE TO A WIRED NETWORK Ellipse features an Ethernet socket on its back-panel for connection to a wired network. Use this socket to connect your Ellipse to a valid wired network and it will automatically switch to using that network. This overrides any Wi-Fi connection previously being used.

· Open the app on your phone or tablet.

· Your Ellipse will appear as an available device with a Setup button alongside it.

· Tap on Setup and follow the steps offered by the app.

Although this process uses Bluetooth, Ellipse must be paired with a device to play audio via Bluetooth. See 9.1 USING BLUETOOTH on page 13 of this guide.

5.2 CONNECTING ELLIPSE TO WI-FI USING AN IPHONE OR IPAD As an alternative to using the Meridian Control app to connect Ellipse to your W-Fi network, it can be done using an Apple iPhone or iPad
When Ellipse is used for the first time, it automatically advertises itself wirelessly so it can be found by an iPhone or iPad.

· Open Settings on the iPhone or iPad.
· Within Settings, tap on Wi-Fi. Your Ellipse will appear under SET-UP NEW AIRPLAY SPEAKER.

· Tap on the Ellipse to select it for connection to the Wi-Fi network and follow the steps offered by the app.

INTRODUCTION

GETTING STARTED

UNPACKING THE ELLIPSE

MERIDIAN CONTROL APP

05
CONNECTING ELLIPSE TO A NETWORK

ELBLI-LPISNEK CONTROLS &
FEATURES

USING THE CONTROL APP

OTHER CONTROL METHODS

STSRPEACMIFINCAGTION AUDIO SETUP

CONFIGURING WITH THE
CONTROL APP

SPTERCOIFUIBCLAETSIHOONOTINGTRADEMARKS & LICENSING

8
6. ELLIPSE CONTROLS & FEATURES

The Meridian Ellipse has been designed with a simple and intuative control panel to allow you to enjoy your music at the touch of a button.

6.1 CONTROL PANEL

Bluetooth Pairing

Play/ Pause

The Meridian M logo is a multipurpose touch-control. It controls On/Standby, audio input selection and it acts as the product’s status indicator: · A single touch brings the Ellipse out-of-Standby. · When out-of-Standby, single touches step through the audio inputs. · Touch and hold to put the Ellipse into Standby.

Previous
Volume Down

On/Standby and Input Selection see below

Next
Volume Up

The colour of the M icon indicates the following: · Blue flashing = Initialisation period after power-up · Blue = Standby mode · White = On · White with heartbeat flashing = Bluetooth pairing mode · Cyan = Set-up mode · Cyan flashing = Software update in progress

Volume Down: Single touch for one step, touch and hold to slide volume down. Previous: Available if supported by the audio source currently in use. > Bluetooth Pairing: See 9.1 USING BLUETOOTH on page 13 of this guide. > Play/Pause: Controls playback of streamed audio. > Next: Available if supported by the audio source currently in use. > Volume Up: Single touch for one step, touch and hold to slide volume up.

6.2 NFC “TAP TO PAIR” Ellipse supports Near Field Communication (NFC) which allows “tap-to-pair” to establish a Bluetooth connection from suitablyequipped Android devices. The NFC sensor is located slightly offset from the centre of the top of the Ellipse, next to the control panel, as indicated here. Certain Apple devices can be configured to use NFC; check the user documentation for your Bluetooth device for details of how to do this.

INTRODUCTION

GETTING STARTED

UNPACKING THE ELLIPSE

MERIDIAN CONTROL APP

CONNECTING ELLIPSE TO A NETWORK

06
ELLIPSEB-LINK CONTROLS & FEATURES

USING THE CONTROL APP

OTHER CONTROL METHODS

STSRPEACMIFINCAGTION AUDIO SETUP

CONFIGURING WITH THE
CONTROL APP

SPTERCOIFUIBCLAETSIHOONOTINGTRADEMARKS & LICENSING

9
6. ELLIPSE CONTROLS & FEATURES CONTINUED
6.3 ELLIPSE BACK-PANEL

BACK-PANEL Label Network Status
Opt/An Input USB USB Audio Ethernet Power Input Factory Reset

Function
This LED indicates various network states (see guide on right hand side of page)
Dual purpose audio input. Accepts either a 3.5mm stereo analogue minijack or a 3.5mm optical mini-TOSLINK connector.
USB-A socket for audio playback from USB storage.
USB-C dual-purpose socket – control-system connection and digital audio input supporting sampling rates up to 192kHz @ 24-bit.
RJ45 socket for wired network connection.
Power cord socket for cloverleaf-style cable (IEC C5 connector).
Press and hold to restore all settings to factory defaults. Note: This includes network settings.

INTRODUCTION

GETTING STARTED

UNPACKING THE ELLIPSE

MERIDIAN CONTROL APP

CONNECTING ELLIPSE TO A NETWORK

06
ELLIPSEB-LINK CONTROLS & FEATURES

NETWORK STATUS LED

The colour of the LED on the back-panel indicates the following:

When using Wi-Fi Red Yellow Yellow flashing Blue White flashing
Purple flashing

Error Not connected Connecting
Connected Unconfigured
Unconfigured / WAC (Wireless Accessory Configuration) enabled

When using a wired connection Red Yellow Yellow flashing Green White flashing
Purple flashing

Error Not connected Connecting
Connected Unconfigured
Unconfigured / WAC (Wireless Accessory Configuration) enabled

USING THE CONTROL APP

OTHER CONTROL METHODS

STSRPEACMIFINCAGTION AUDIO SETUP

CONFIGURING WITH THE
CONTROL APP

SPTERCOIFUIBCLAETSIHOONOTINGTRADEMARKS & LICENSING

10
6. ELLIPSE CONTROLS & FEATURES CONTINUED

6.4 PLAYING AUDIO VIA THE INPUTS ON THE BACK-PANEL
You can step between the optical, analogue and USB audio inputs using single touches on the Meridian Logo touch-control on the Control Panel on the top of the Ellipse. Alternatively, these inputs can be selected using the source keys on a Meridian System Remote (available separately).
When streaming music via the network or via Bluetooth, all of the touch controls on the top of the unit are illuminated and available for use (provided the app being used supports their functions). The control panel will look like this.

However, when any of the inputs on the back-panel are selected for listening, the controls for Previous, Next and Play/Pause are unavailable and are not illuminated. The control panel will look like this.

It is worth noting that your Ellipse does not provide any visual indication for which one of the inputs on the back-panel is selected. Therefore, we strongly recommend using the Meridian Control app to select these inputs. The app provides an straightforward method of switching between sources, and shows which input is selected for listening.
Please note: If audio is played from a streaming service while any of the back-panel audio inputs is selected, the unit will automatically switch to playing the streamed audio. You can revert to the audio inputs via the app or by using the Meridian logo touch-control to step back though the audio inputs.

INTRODUCTION

GETTING STARTED

UNPACKING THE ELLIPSE

MERIDIAN CONTROL APP

CONNECTING ELLIPSE TO A NETWORK

06
ELLIPSEB-LINK CONTROLS & FEATURES

USING THE CONTROL APP

OTHER CONTROL METHODS

STSRPEACMIFINCAGTION AUDIO SETUP

CONFIGURING WITH THE
CONTROL APP

SPTERCOIFUIBCLAETSIHOONOTINGTRADEMARKS & LICENSING

7. USING THE CONTROL APP

To control Ellipse using the Meridian Control app, the phone or tablet running the app must be connected to the same network as your Ellipse. For details on how to download and install the app, refer to 4. MERIDIAN CONTROL APP on page 6 of this guide.

· When the app is launched, it will list your Ellipse as available for control.

· Tap on the entry for Ellipse to access the control options.

· There are several alternative screen views available when using the app to control Ellipse. Tapping on the icons at the bottom of the screen switches between the options.

SETTINGS AVAILABLE FROM THE MENUS SECTION OF THE APP

Setting TREBLE BASS IMAGE FOCUS PHASE FREE-Q BASS & SPACE IMAGE ELEVATION
LIPSYNC BRIGHTNESS

Values 10.0 dB to +10.0 dB

Default 0.0 dB

5.0 dB to +5.0 dB

0.0 dB

10> to <10

<0>

-ve / +ve

+ve

Free / Wall / Shelf / Corner Free

Off / Min / Med / Max

Max

Off / Min / Med / Max

Min

+0ms to +85ms 1 to 16

+0ms 8

Notes
Tilts the frequency response across the higher frequencies
Lifts or cuts the low-frequency response
Directs the sound image for off-centre listening positions
Selects the absolute phase of the sound
Selects low-frequency compensation for location
Adjusts the perceived width of the soundstage
Adjust the height of the sound image to suit the listening position
Adjusts delay on the sound to enable it to be kept in time with video image
Adjusts the brightness of the touch controls

INTRODUCTION

GETTING STARTED

UNPACKING THE ELLIPSE

MERIDIAN CONTROL APP

CONNECTING ELLIPSE TO A NETWORK

ELBLI-LPISNEK CONTROLS &
FEATURES

07
USING THE CONTROL APP

OTHER CONTROL METHODS

STSRPEACMIFINCAGTION AUDIO SETUP

CONFIGURING WITH THE
CONTROL APP

11
SPTERCOIFUIBCLAETSIHOONOTINGTRADEMARKS & LICENSING

8. OTHER CONTROL METHODS

12

· Ellipse features an IR receiver for use with a Meridian system remote such as the Meridian MSR2 (available separately).

· Ellipse has a fully-featured automation interface allowing third-party control systems to access all aspects of the product’s functionality.

· Some functions, such as volume control and audio transport controls (Play, Pause etc.), can be accessed directly from certain audio streaming apps used for playback from smartphones, tablets or computers.

INTRODUCTION

GETTING STARTED

UNPACKING THE ELLIPSE

MERIDIAN CONTROL APP

CONNECTING ELLIPSE TO A NETWORK

ELBLI-LPISNEK CONTROLS &
FEATURES

USING THE CONTROL APP

08
OTHER CONTROL METHODS

STSRPEACMIFINCAGTION AUDIO SETUP

CONFIGURING WITH THE
CONTROL APP

SPTERCOIFUIBCLAETSIHOONOTINGTRADEMARKS & LICENSING

13
9. STREAMING AUDIO SETUP

9.1 USING BLUETOOTH Bluetooth streaming does not require your Ellipse to be connected to the Internet or to a network.
Ellipse can be paired with a Bluetooth device, such as a phone, tablet or computer, in three differing ways:
· Touch and hold the Bluetooth touch control on the top of your Ellipse. Release when the Meridian logo starts to flash. You can now pair your Bluetooth device with the Ellipse.
· Activate pairing mode from within the Meridian Control app. While the Meridian logo on the top of the unit is flashing, you can now pair your Bluetooth device with the Ellipse.
· “Tap-to-pair” with compatible Bluetooth devices. For further details, refer to 6.2 NFC “TAP TO PAIR” on page 8 of this guide.
By default, your Ellipse will now appear within the list of Bluetooth devices as Meridian Ellipse, followed by the last six characters of its MAC address. If desired this name can be changed using the Meridian Control app.
Once a Bluetooth connection is established, your Ellipse can be selected for audio playback within the app being used.
Ellipse features two useful configuration settings which are specific to Bluetooth. Full details are provided in 10. CONFIGURING WITH THE CONTROL APP on page 14 of this guide.
9.2 WORKS WITH GOOGLE CAST With Works with Google Cast, your phone becomes your remote. Simply tap the Cast button from apps you already know and love to stream music from your phone, tablet or laptop to your Ellipse.
Please note, you can cast only audio to your Ellipse, not video content.

9.3 APPLE AIRPLAY Ellipse supports Works with Apple AirPlay so an iPhone or iPad can stream audio wirelessly to it.
AirPlay is an Apple technology designed to control home audio systems and speakers in any room from your iPhone, iPad, HomePod or Apple TV.
To setup AirPlay use the Home app on an iPhone or iPad running iOS 11.4 or later. Within the Home app, tap on the + (plus) button to add your Ellipse as an Accessory.
9.4 TIDAL CONNECT Ellipse supports TIDAL Connect. TIDAL Connect allows high- quality audio to be streamed from the Internet directly to the Ellipse under the control of the TIDAL app running on a smartphone, tablet or computer connected to the same network as your Ellipse. When playing a track on the app, tap on the Now Playing bar, tap on the device selector and choose your Ellipse for playback.
9.5 SPOTIFY CONNECT Spotify Connect allows audio to be streamed from the Internet directly to your Ellipse under the control of the Spotify app running on a smartphone, tablet or computer. To use Spotify Connect, ensure your Ellipse and your phone, tablet or computer are connected to the same network. Open the Spotify app, play a track and select Devices Available. Select your Ellipse to stream music to it.
9.6 ROON Ellipse is a Roon Ready device. Roon Ready devices have Roon’s streaming technology built in, and are certified by Roon Labs to provide the highest level of quality and performance in network streaming.
Ellipse will stream music from a Roon server over the local network. It will appear as an output device in the Roon app running on a smartphone, tablet or computer.
9.7 UPnP If a UPnP music server is accessible on the network, Ellipse can stream music from the music server using an appropriate control application such as Bubble UPnP or Jriver.

INTRODUCTION

GETTING STARTED

UNPACKING THE ELLIPSE

MERIDIAN CONTROL APP

CONNECTING ELLIPSE TO A NETWORK

ELBLI-LPISNEK CONTROLS &
FEATURES

USING THE CONTROL APP

OTHER CONTROL METHODS

09
STRSEPAEMCIIFNICGATION AUDIO SETUP

CONFIGURING WITH THE
CONTROL APP

SPTERCOIFUIBCLAETSIHOONOTINGTRADEMARKS & LICENSING

14
10. CONFIGURING WITH THE CONTROL APP

Configuration mode on the Ellipse provides access to user-adjustable configuration settings, and it displays “read-only” parameters relating to how the Ellipse is configured. To configure Ellipse using the Meridian Control app, the phone or tablet running the app must be connected to the same network as your Ellipse. For details on how to download and install the app, refer to 4. MERIDIAN CONTROL APP on page 6 of this guide. · From the home page of the app, tap on the burger menu () in the top-left corner of the
app and select Configuration. · The app will show a list of all network- connected Meridian products which can be con-
figured from the app. Note: If your Ellipse is the only available product, it will be the only product shown in the list. · To put the Ellipse into Configuration mode, tap on the entry for your Ellipse from the list of products. · The app will display the eight configuration “accordion” menus. · Tap on an accordion to open it.

The contents of the accordions are described below.

IDENTIFICATION

Setting Device Name
Serial Number AFS Version Net Version Network Connection

User adjustable or Read-only? User adjustable
Read-only Read-only Read-only Read-only

Notes
Here you can give the Ellipse the name you want to appear when it is accessed through streaming services and shown on Bluetooth devices. For example, `Living Room Ellipse’. The Meridian serial number of your Ellipse AFS firmware version Net firmware version Shows whether a wired or wireless network connection is in use.

SSID
IP Address Gateway DNS MAC Address

Read-only
Read-only Read-only Read-only Read-only

The name of the network to which the Ellipse is connected. Network setting Network setting Network setting Unique and permanent alphanumeric network identifier.

SOURCES View and change settings specific to each of the five input sources on the Ellipse. The inputs are: Analogue, Network, Optical, Bluetooth and USB.

Tap on the button Configure Sources to access the settings for all the sources. For each source, the following settings are available:

Setting Legend Enable Input Input Gain
Q-Sync
LipSync

Options Up to 15 text characters On/Off -6dB,-3dB, 0dB,+3dB,+6dB
On/Off
+0ms to +85ms

Default As input label On 0dB
On
+0dB

Notes
Enter the name you want to see displayed for this source.
Allows the source to be disabled so it is not available for selection.
This can be adjusted to balance set the listening level of this source so it is similar to the level from other sources.
This is an advanced setting which can be used to disable the buffering system used with the Ellipse. Required only if a digital source has extremely poor clock-timing which causes drop-outs during use.
Adjusts delay on the sound to enable it to be kept in time with video image

INTRODUCTION

GETTING STARTED

UNPACKING THE ELLIPSE

MERIDIAN CONTROL APP

CONNECTING ELLIPSE TO A NETWORK

ELBLI-LPISNEK CONTROLS &
FEATURES

USING THE CONTROL APP

OTHER CONTROL METHODS

STSRPEACMIFINCAGTION AUDIO SETUP

10
CONFIGURING WITH THE CONTROL APP

SPTERCOIFUIBCLAETSIHOONOTINGTRADEMARKS & LICENSING

10. CONFIGURING WITH THE CONTROL APP CONTINUED

START UP Choose how the Ellipse behaves when it is switched out of Standby.

Setting Start Volume
Start Source
Auto-start after power-up

Options

Default

25 to 87, or Last Valid Last Valid

Analogue Network Network Optical Bluetooth USB

On/Off

Off

Notes
Selects the volume level for when the product comes out of Standby. If set to `Last Valid’ the product will revert to the volume level used previously.
Selects the source the product will use when it is brought out of Standby without receiving a specified source command from elsewhere.
Automatically bring the product out of Standby whenever it is powered up. The Start Volume and Start Source will be as selected above.

SERVICES This accordion provides easy access to the set up processes for using the Ellipse with Works with Google Cast, AirPlay and Spotify.

BLUETOOTH
Setting Enable Bluetooth Auto Play

Options On/Off

Enable Bluetooth

On/Off

disconnect on Standby

Bluetooth Volume Limit

28-99

15

Default Off
Off 99

Notes
Allows you to decide how the Bluetooth devices behaves when Bluetooth is selected for listening on the Ellipse. When set to On’ the Ellipse will attempt to start playing the currently connected Bluetooth device. This allows Bluetoothconnected TVs to produce audio again automatically if you switch source and then return to Bluetooth. When set toOff’ there will be no attempt by the Ellipse to start playing the connected Bluetooth device.
Allows you to decide how the Bluetooth device behaves when entering Standby mode. When set to On’ the Bluetooth device will automatically disconnect when the Ellipse enters Standby. When set toOff’ the Bluetooth device will not disconnect when the Ellipse enters Standby.
Limit the maximum volume level available when adjusting volume on the Bluetooth device. Avoids accidently selecting an overly-loud setting due inadvertently pressing the controls on the phone or tablet.

INTRODUCTION

GETTING STARTED

UNPACKING THE ELLIPSE

MERIDIAN CONTROL APP

CONNECTING ELLIPSE TO A NETWORK

ELBLI-LPISNEK CONTROLS &
FEATURES

USING THE CONTROL APP

OTHER CONTROL METHODS

STSRPEACMIFINCAGTION AUDIO SETUP

10
CONFIGURING WITH THE CONTROL APP

SPTERCOIFUIBCLAETSIHOONOTINGTRADEMARKS & LICENSING

16
10. CONFIGURING WITH THE CONTROL APP CONTINUED

IR
Setting IR Enable

Options On/Off

Default On

Notes
Set to On’ to enable the IR (infra-red) receiver. Set toOff’ to disable.

WI-FI Setting Wi-Fi SSID Wi-Fi Network Selection Forget This Network
Connection Type

Notes
Read only. Shows the identity of the currently connected Wi-Fi network.
Tap on Wi-Fi Selection to scan and connect to available Wi-Fi Networks
Tapping on Forget disconnects the Ellipse from its Wi-Fi network and restarts the Set-up Wizard on the app. Note: This action takes place as soon as the button is tapped.
Tap on Configure to select between DHCP and static IP settings for the Wi-Fi network..

ETHERNET
Setting Connection Type

Notes
Tap on Configure to select between DHCP and static IP settings for the wired network.

FIRMWARE UPDATE This accordion allows you to check whether a new version of firmware is available and, if it is, to perform an update to your Ellipse. The status of the update process is indicated on the Meridian `M’ logo on the Ellipse’s control panel.

Colour of M logo Flashing cyan Magenta Flashing white Red Green

Status of firmware update process Downloading firmware Erasing non-volatile memory Updating non-volatile memory Error during update Update successful

RESTORE SETTINGS
Setting Factory Restore

Notes
Tapping on Factory Restore to reset all settings to their factory defaults. Note: Selecting restore will cause the Ellipse to disconnect from the network and reboot.

INTRODUCTION

GETTING STARTED

UNPACKING THE ELLIPSE

MERIDIAN CONTROL APP

CONNECTING ELLIPSE TO A NETWORK

ELBLI-LPISNEK CONTROLS &
FEATURES

USING THE CONTROL APP

OTHER CONTROL METHODS

STSRPEACMIFINCAGTION AUDIO SETUP

10
CONFIGURING WITH THE CONTROL APP

SPTERCOIFUIBCLAETSIHOONOTINGTRADEMARKS & LICENSING

11. SPECIFICATION

AUDIO INPUTS

· 1 x USB-C supporting sampling rates up to 192kHz @ 24-bit
· 1 x mini-TOSLINK optical supporting sampling rates up to 96kHz @ 24 bit
· Stereo analogue with 88kHz/24bit A/D conversion
(Optical and analogue share dual-purpose 3.5mm minijack socket)

CONTROL OPTIONS

· Illuminated touch controls located on top of unit
· Meridian Control app via Wi-Fi or wired network connection
· IR receiver (MSR2 remote control available separately)
· Automation interface via the USB Maintenance and Ethernet sockets

PERFORMANCE

· SPL: 100dB @ 1m (pink-noise source)
· Frequency response in room within 3dB: 40Hz 20kHz (volume setting 65)

17

AMPLIFICATION
DRIVE-UNITS
WI-FI OPERATION DIMENSIONS WEIGHT POWER

· 2 x 25W for full-range drive-units, 1 x 30W for subwoofer drive-unit
· Two 90mm polypropylene full-range drivers · One 150mm x 100mm polypropylene long-throw
“racetrack” subwoofer driver · Crossover frequency = 180Hz
· Dual band – 2.4GHz and 5GHz compatible
· 412mm x 223mm x 171mm (W x D x H)
· 3.9kg · 100V 240V AC, Max 70W

INTRODUCTION

GETTING STARTED

UNPACKING THE ELLIPSE

MERIDIAN CONTROL APP

CONNECTING ELLIPSE TO A NETWORK

ELBLI-LPISNEK CONTROLS &
FEATURES

USING THE CONTROL APP

OTHER CONTROL METHODS

STSRPEACMIFINCAGTION AUDIO SETUP

CONFIGURING WITH THE
CONTROL APP

11
SPTERCOIFUIBCLAETSIHOONOTINGTRADEMARKS & LICENSING

12. TRADEMARKS AND LICENSING
Use of the Works with Apple AirPlay badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards. Apple, AirPlay, iPad and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries and regions. The trademark “iPhone” is used in Japan with a license from Aiphone K.K.
Android,Google Play and Google Cast are trademarks of Google LLC.
The Spotify Software is subject to third party licenses found here: https://www.spotify.com/connect/third-party-licenses. Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how.

18
High Fidelity Music Streaming.
Being Roon Ready means that Ellipse uses Roon streaming technology, for an incredible user interface, simple setup, rocksolid daily reliability, and the highest levels of audio performance, without compromise.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Meridian Audio Limited is under license. Other trademarks and trade names are those of their respective owners.
UPnPTM is a trademark of the UPnPTM Forum.

INTRODUCTION

GETTING STARTED

UNPACKING THE ELLIPSE

MERIDIAN CONTROL APP

CONNECTING ELLIPSE TO A NETWORK

ELBLI-LPISNEK CONTROLS &
FEATURES

USING THE CONTROL APP

OTHER CONTROL METHODS

STSRPEACMIFINCAGTION AUDIO SETUP

CONFIGURING WITH THE
CONTROL APP

SPECIFICATION

12
TRADEMARKS & LICENSING