Schneider Electric XB4BA31 Harmony Non Illuminated Push Button Instruction Manual
- June 30, 2024
- Schneider Electric
Table of Contents
Schneider Electric XB4BA31 Harmony Non Illuminated Push Button
Product Specifications
- Manufacturer: Schneider Electric Industries SAS
- Brand Name: Harmony XB4 Non Illuminated Push Button Product Function: Used to turn on and off control circuits in industrial applications
- Product Reference: XB4BA31
- Total Product Mass: 75 g
- Product Dimensions: H 46.5mm x L 52mm x D 30mm
- Date of Information Release: 10/2023
Product Usage Instructions
Installation
- Ensure power source is turned off before installation.
- Mount the push button securely using appropriate screws in a suitable location.
- Connect the control circuit wires to the terminals as per the wiring diagram.
Frequently Asked Questions (FAQ)
Q: Is this push button suitable for outdoor use?
A: No, this push button is designed for indoor use in industrial settings.
ENVEOLI2308035_V1 – End of Life Instructions – Harmony XB4 Non Illuminated Push Button
Product End of Life Instructions
Harmony XB4 Non Illuminated Push Button
Potential disassembly risks
CAUTION
HAZARD OF PARTS WITH SHARP EDGES Apply appropriate personal protective
equipment (PPE) during disassembly. Failure to follow these instructions can
result in injury.
End of Life Instructions
Recommendation| Number on
drawing
| Component / Material| Weight (in
g)
| Comment
---|---|---|---|---
To be dismantled| 1| Screw,Spring, Bezel,Bracket| 64.42| Metal Parts
To be dismantled| 2| Head Cap, Contact Cover, Housing| 10.03| Plastic Parts
Other| | Liquid and Pasty Substances| 0.5| Ink, Glue, Solvent
ENVEOLI2308035_V1 – End of Life Instructions – Harmony XB4 Non Illuminated Push Button
| Product description
---|---
Manufacturer identification| Schneider Electric Industries SAS
Brand name| Schneider Electric
Product function| Push button switch is usually used to turn on and off
the control circuit and it is a kind of control switch appliance that is
widely used in industrial applications.
Product reference| XB4BA31
Total representative product mass| 75 g
Representative product dimensions| H 46.5mm x L 52mm x D 30mm
Accessories| No accessories needed
Date of information release| 10/2023
Additional information
Legal information| This product family is in the scope of European Union directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). The product family must be disposed according to the legislation of the country. This document is intended for use by end of life recyclers or treatment facilities. It provides the basic information to assure an appropriate end of life treatment for the components and
materials of the product.
---|---
In case of special transportation:
transportation method
| No specific means of transportation are required.
Recyclability potential| **84%**| Recyclability rate has been
calculated based on REEECY’LAB tool developed by Ecosystem, for
components/materials not covered by the tool, data from the “ECO’DEEE
recyclability and recoverability calculation method” was taken. If no data was
found a conservative assumption was used (0% recyclability).
Schneider Electric Industries SAS
Country Customer Care Center http://www.schneider-electric.com/contact
35, rue Joseph Monier
CS 30323
- F- 92500 Rueil Malmaison Cedex
- RCS Nanterre 954 503 439
- Capital social 928 298 512 € www.se.com
- ENVEOLI2308035_V1
Published by Schneider Electric
© 2023 – Schneider Electric – All rights reserved