Tribit BTS12 Portable Wireless Speaker User Manual

Tribit BTS12 Portable Wireless Speaker User Manual

Packing List

• StormBox Micro 2
  

• USB-C charging cable

• User Manual

Product Illustration

Charging

• Connect this speaker to a 5V power outlet via the providing USB-C charging cable.

• Charge other devices: Connect the speaker with your USB-enabled device via a USB-C charging cable
  

• Battery Indicator
  | Red indicator is flashing| Low battery
  ---|---|---
  | White. indicator is flashing| Charging
  | All indicators turn off| Full charged

• Indicator Instruction
  | | | | |
  ---|---|---|---|---|---
  0-30%| 30-50%| 50-70%| 70-80%| 80-100%| Full changed

Button

• Power on/off
  | Short Press| Power on| | Blue indicator is flashing
  ---|---|---|---|---
  Short Press| Power off| All indicators turn off
  Press and hold it for 8s| Reset| Blue indicator is flashing
• Bluetooth Connection
  

| Press and hold it for 1s| Enters pairing mode| | Blue indicator is flashing| Pairing status
---|---|---|---|---|---
Press and hold it for 10s| Factory reset| Bluetooth indicator is steadily on| Successfully Connected

The StormBox Micro 2 Speaker will automatically connect to the last paired device again if available. If it fails, the speaker will enter to pairing mode.
The speaker can remember up to 8 paired Bluetooth devices.
Better still, it can connect to 2 devices simultaneously at a time.

• Conversion between 2 Connected Devices
  1. Pause the playback of the current device
  2. Play the audio file of the other device
• Volume Adjustment
  

| Short Press| Decrease volume
---|---|---
Keep it pressed for seconds| Continuously decrease volume
| Short Press| Increase volume
Keep it pressed for seconds| Continuously increase volume

• Multifunctional Button (MFB)
  
  Music Mode| Short press| Play /Pause
  ---|---|---
  Double Press| Next Track
  Press it for 3 times| Previous Track
  Press and hold it for 1s| Activate Siri

Conversation Mode| Short press| Answer / End phone call
Press and hold it for 1s| Reject Phone call
Short press| Pause the current call and answer the incoming call
Short press| Switch between two phone calls

Party Mode

1. Make sure both two speakers are turned on.
   

2. Long press the Bluetooth button of speaker A for 3s to enter the party mode pairing. (Note: this speaker will be regarded as the main speaker)

3. Long press the Bluetooth button of speaker B for 1 s to enter the pairing mode.
   (Note: this speaker will be regarded as a secondary speaker). When you hear the prompt tone” party mode’ the speaker A and B successfully enter the party mode.
   Note: The function of party mode can be realized only when you have 2 Tribit StormBox Micro 2 speakers.

Stereo Mode

1. Make sure both two speakers have entered party mode.
   

2. Short press the Bluetooth button on any of the two speakers.

3. Release the buttons when you hear the voice of Stereo Mode. One speaker will sound “Left” and the other will sound “Right’ and then the stereo mode is activated.
   Note: The function of stereo mode can be realized only when you have 2 Tribit StormBox Micro 2 speakers.

Conversion between Party Mode and Stereo Mode

Short press the Bluetooth button on any of the two speakers.

Disable the Party Mode or Stereo Mode

Press and hold the Bluetooth button for 5s on any of th+ two speakers, then both will re-enter Bluetooth pairing mode.

Specifications

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-able protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

IC Caution

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>