ONE FOR ALL WM5010 Stud Finder Installation Guide

June 6, 2024
ONE FOR ALL

ONE FOR ALL - Logo

QUICK INSTALLATION GUIDE
WM5010
ULTRA SLIM

Connect with us

facebook.com/|
@oneforall.worldwide|
linkedin.com/|
youtube.com/
---|---|---|---

Thank you for purchasing this ONE FOR ALL product! The product you now have in your possession is made of durable materials and is based on a design, every detail of which has been meticulously thought out. That is why ONE FOR ALL gives you a Life Time guarantee for defects in materials or manufacturing.

GUARANTEE TERMS AND CONDITIONS

  1. ONE FOR ALL guarantees that if during the guarantee period of a product, faults arise due to defects in manufacturing and/or materials, it will, at its discretion, repair or if necessary replace the product, free of cost. A guarantee for normal wear and tear is hereby expressly excluded.
  2. If the guarantee is invoked, the product should be sent to ONE FOR ALL together with the original purchase document (invoice, sales slip or cash receipt). The purchase document should clearly show the name of the supplier and the date of purchase.
  3. ONE FOR ALL guarantee shall lapse in the following cases: – If the product has not been drilled, installed and used in accordance with the Instructions for Use;
    • If the product has been altered or repaired by a party other than ONE FOR ALL; – If a fault arises due to external causes (outside the product) such as for example lightning, water nuisance, fire, scuffing, exposure to extreme temperatures, weather conditions, solvents or acids, wrong use or negligence;
    • If the product is used for different equipment than is mentioned on or in the packing.

UNIVERSAL ELECTRONICS BV, COLOSSEUM 2, 7521 PT ENSCHEDE, THE NETHERLANDS

WARNING

Correct installation is extremely essential, and falls outside the scope of responsibility of ONE FOR ALL. The fastening material provided is  exclusively intended for installation on walls made of solid wood, bricks, concrete or solid-wood columns with a maximum of 3 mm wall finishing. For walls made of other materials, for example hollow bricks, please consult your installer and/or specialist supplier. During installation, please also follow the instructions for installation and use of the apparatus to be installed/fixed (for example the LCD/LED/plasma screen).

ONE FOR ALL WM5010 Stud Finder - Stud Finder

Stud Finder

Keep out of reach of children. Replace batteries with new 3X LR44

Dispose batteries separately from normal garbage. Follow local ordinances when disposing the product or battery.
For Indoor Use Only.

Download the One For All Toolbox App
Handy installation tools.

START

  1. • Remove the plastic battery tab as shown.
    • Place the Stud Finder snugly against the wall surface-do not move it.
    • Press and hold the On/off button till the LED indicator turns from red to green
    • Move the Stud Finder horizontally across the wall surface to search for the stud
    Note: Do not release the On/off button during use

  2. • The LED indicator will flash green once if it senses a stud, mark this location by using a pencil.

  3. • Continue moving the Stud Finder until the LED indicator stops flashing green, mark this location by using a pencil.

  4. • Mark the midpoint between two pencil markings to locate the center of the stud.
    • Repeat this process to locate additional studs if required.
    Note: Move the Stud Finder around the surface up/down/left/right to avoid possible

WARNING
Please verify that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components

ONE FOR ALL WM5010 Stud Finder - WARNING

Use the Bubble Level as shown to level your TV mount before beginning the installation and once again prior to finishing the installation

FINISH
712991
WM5010
712991_Manual_StudFinder WM5010_RDN1060521.indd
06-05-2021 15:25

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals