ONE FOR ALL A717411 Outdoor Antenna Instruction Manual
- June 3, 2024
- ONE FOR ALL
Table of Contents
ONE FOR ALL A717411 Outdoor Antenna
UNPACK
INSTRUCTION
-
FIRST connect the USB cable to the power adapter.
Put the power adaptor in any standard 120V wall outlet. Alternatively you can plug the USB cable in one of your USB ports on the side or back of your TV (if available).
-
Now connect the coaxial cable with the additional plastic boot (cap) at the end to the antenna itself.
-
Then connect the coaxial cable at the other end to the ANTENNA IN connector at the back of the TV or set-top box.
-
Turn ON the switch on the power inserter.
-
First secure the mounting bracket to the antenna by using the four screws included in the plastic bag with mounting materials.
-
Decide how you wou’ld like to mount the antenna:
Wall mount or pole mount (pole not included in packaging)
HOW TO USE
If you choose to wall mount the antenna, then position the mounting bracket {flat surface to the wall) as high as possible and drill two holes (distance between holes 58 mm) and put the wall plugs In the holes. After that you can put the screws in. Do not fully screw in but leave 3-4 mm sticking out. Then hang the bracket with antenna attached over the screws.
If you choose to wall mount the antenna, then position the mounting bracket {flat surface to the wall) as high as possible and drill two holes (distance between holes 58 mm) and put the wall plugs In the holes. After that you can put the screws in. Do not fully screw in but leave 3-4 mm sticking out. Then hang the bracket with antenna attached over the screws.
IMPORTANT!
Now you can perform a channel scan on your TV. Set the tuner mode of the TV to
ANTENNA first, then choose CHANNEL SCAN (may be called AUTO PROGRAM, AUTO
TUNING, AUTO SCAN or CHANNEL SEARCH in the setup menu of your TV).
If the number of channels or the quality is poor, please change the antenna’s position and go to step or and RE-SCAN on your TV.
For detailed instructions on how to perform a channel scan, please see the manual provided with your TV.
IMPORTANT!
Remember to perform a RE-SCAN on your TV. Whenever you re-position or rotate
the antenna you have to perform a CHANNEL SCAN on your TV.
FINISH
WWW.ONEFORALL.COM/TIPS-AND-TRICKS
Before returning this product please call us for support
Antes de regresar este producto, Uamenos para poder ayudarle
Customer Support: 855-823-3422 (toll
free) www.oneforall.com
IMPORTANT!
FOLLOW ALL SAFETY PROCEDURES, WARNINGS AND INSTRUCTIONS WHEN INSTALLING YOUR
ANTENNA.
SAFETY PROCEDURES
- Make sure there Is another person present (on the ground) while installing the attic/ outdoor Antenna.
- 00 NOT attempt to mount the antenna on a windy, rainy or snowy day.
PROCEDIMIENTOS DE SEGURIDAD
- AsegUrese de q-uti se encuentra otra persot’la pre:sente {en e-t .st1elo} m1entras iMldla !<1 attic/ outdoor Antenna.
- No 1ntt”nte montar la antena en un dla de vJento, lluvla o nieve.
MOUNT THE ANTENNA AT LEAST 20 FT. FROM ALL POWER LINES OR UTILITY POLES.
POWER LINE WARNING
If you intend to mount the attic / outdoor Antenna on a rooftop, make sure to
mount 1t at least 20 ft away from any power lines or utility poles.
PLACEMENT TIPS FOR ANTENNAS:
- Avoid metal surfaces
- Position the antenna as high as possible
References
- One For All - One For All
- Home | One For All
- Home | One For All
- One For All Warranty / Guarantee Information