ONE FOR ALL URC 4812 TV Replacement Remote User Guide

ONE FOR ALL URC 4812 TV Replacement Remote

Customer Support

Service client: www.oneforall-canada.ca OFA warranty / terms & conditions: Garantie OFA / termes et conditions:
www.oneforall-canada.ca Imported into Canada by: Universal Electronics BV – Europe & International P.O. Box 3332, 7500 DH Enschede The Netherlands
www.oneforall.com One For All is a registered trademark of Universal Electronics BV One For All est une marque deposée de Universal Electronics BV
URC 4812 Sony: SONY® is a registered trademark of SONY Corporation. URC 4812 Sony: Industry Canada Regulatory Information CAN ICES-3 (B)/NMB-3 (B)

WARRANTY / GUARANTEE

WARRANTY / GUARANTEE INFORMATION
Terms and Conditions for “100% Guaranteed To Work” policy, and the separate 1 Year Limited Warranty against defects in material and workmanship can be found at www.oneforall.com/remoteguarantee, or you may request hard copies via mail to UEI Technical Support Service, Suite 301, 26250 Euclid Ave., Euclid, OH 44132. Please include your full name, product information, and contact information in your request communication. www.oneforall.com

BATTERIES

CAUTION : Risk of explosion if battery is replaced by an incorrect type. Use quality Alkaline batteries.

REMOTE CONTROL

1. INPUT Input Select
2. POWER Power
3. 0-9 Digits for Channel Entry
4. EXIT Menu Exit
5. TEXT Teletext on and off
6. APP 1 YouTube / App Shortcut Key
7. APP 2 Netfl ix / App Shortcut Key
8. APP 3 Google Play / App Shortcut Key
9. I Info
10. LIST Title List
11. SLEEP Sleep Timer
12. GUIDE Guide
13. UP, DOWN, LEFT, RIGHT, OK Navigate the Menu
14. BACK Back one level in the Menu
15. OPTIONS Options, Menu
16. HOME Home
17. RED, GREEN, YELLOW, BLUE Fastext
18. VOL + / – Volume Up and Down
19. LAST Last Channel
20. PROG + / – Channel Up and Down
21. MUTE Mute
22. AUDIO Audio / Language
23. SUB Subtitles
24. HELP Help
25. REW, PLAY, FF, PAUSE, REC, STOP Playback control
26. FORMAT Screen Format
27. DIGI/ANALOG Digital / Analog
28. SYNC Sync, Bravia Sync

SET UP YOUR TELEVISION

THE MAJORITY OF NEWER SONY TV’S SHOULD WORK DIRECTLY.
After putting batteries in, just test some of the keys, and if they work, your remote is ready. If not, follow the next steps:

1. Make sure your TV is on (not on standby).
2. Hold down Red + Blue until the LED behind the Power Key blinks twice.
3. Point towards the TV and hold down the Power key until the TV turns off
4. The remote will send a diff erent Power signal every 3 seconds. As soon as the TV turns off , let go of the Power key.
5. The light will blink twice. Now test the rest of the keys on the remote, if they work as your original did, your remote is ready to use. If you fi nd some keys do not work as expected (or at all), proceed to the next step.

If you find some keys still do not work as expected (or at all), proceed to the next step.

IF STEP 1 DOES NOT WORK AS EXPECTED

ARE SOME KEYS NOT WORKING AS EXPECTED?
If you find some keys do not work as expected (or at all), proceed to the next step.

1. Make sure your TV is on (not on standby).
2. Hold down RED + BLUE until the LED behind the Power Key blinks twice
3. Point towards the TV and hold one of the keys that is not working correctly (for example HOME).
4. The remote will send a signal every 3 seconds.
5. When the correct function is shown on the screen (in this case the HOME), let go of the key.
6. The LED will blink twice – your remote is ready to use.

LEARNING

LEARN A NEW FUNCTION TO YOUR REMOTE
Your One For All remote can learn any function from your original (working) remote.

1. Place the original remote facing the One For All remote on a flat surface.
2. To learn : Hold down GREEN + YELLOW until the LED blinks twice.
3. Press 975. The LED will blink twice.
4. Press the key on the One For All remote you want to learn on, for Example: the VOL + key. The LED will blink rapidly.
5. Press the key on the Original remote you want to learn, for Example: the VOL + key of your Audio Device
6. Two blinks : ok. Repeat from step 4 for any more keys to learn. Long blink: try again from step 4.
7. When you have learned all the keys you need, press and hold the OK key for 3 seconds. The LED will blink twice.

HOW TO DELETE A LEARNED FUNCTION

1. Hold down GREEN + YELLOW until the LED blinks twice.
2. Press 976.
3. Press the key to reset twice.
4. The LED flashes twice and the key will revert to the original function

SOUND BAR / AUDIO RECEIVER VOLUME CONTROL

If you have your TV connected to a Sound Bar or Audio Receiver, it’s possible to set up your One For All remote to control the Volume and Mute of this device. There are two ways to do this:

AUDIO SIMPLESET
If you have a Sound Bar or Audio Device from one of the brands listed in the table below, you can use the SimpleSet method to program your remote to control it. If you do not have one of the below brands, please proceed to the next section

Note that each of the brands has a digit associated with it, for example 4 for LG (and JVC). To set up your remote to control your Sound Bar / Audio Device, first make sure your TV and Sound Bar / Audio Device are both powered on, and that there is something playing that you can hear (this procedure will test the Mute function). Next

1. Hold down the VOLUME UP and VOLUME DOWN buttons together until the LED under the POWER key blinks twice.
2. Now point the remote towards your Sound Bar / Audio Devices and hold down the digit key for your brand (for example 4 for LG). The remote will send the Mute function to your device every 3 seconds.
3. As soon as your Sound Bar / Audio Device mutes the volume, release thedigit key. The LED under the Power key will blink twice, and the Volume Up, Down and Mute keys should now control your Sound Bar / Audio Device.

AUDIO CODE SETUP
If your Sound Bar / Audio Device is not one of the brands listed above, you can also set up the remote to control it by entering a 4 digit code. The codes are listed in the Audio Codelist section of this manual, and are listed by brand and then popularity. Locate the brand of your Sound Bar / Audio Device in this code list and then the procedure is:

1. Hold down the VOLUME UP and VOLUME DOWN keys until the LED under the Power key blinks twice.
2. Enter the first 4 digit code for your Sound Bar / Audio Device. The LED should blink twice on the last digit.
3. Now try the Volume Up, Down and Mute and see if they control your Sound Bar or Audio Device.
4. If they work, your remote is set up. If not try again from step 1 using the next code in the list.

POWER MACRO
If you have set up your Sound Bar or Audio Device using SimpleSet or Code Setup, you can now turn your TV and Audio Device both on and off using asingle key. Simply hold down the Power key for 3 seconds and the remote will send the Power function to both the TV and the Audio Device / Sound Bar. If you press and release the key, it will only control the TV.

APP SHORTCUT KEYS

The One For All remote features three App Shortcut Keys which can be used to open apps on your TV. If your original remote control has a YouTube, Netflix, or Google Play key, these keys will perform the same function. However if you try these keys and they do not work, but your TV still has the ability to watch a streaming service, you can use this key as a shortcut by programming a macro (a series of button presses) on it. You could also program the keys to access other apps on your TV. To program the macro, you first need to know the sequence keys you use to access the service. For example, some TVs will start Netflix by pressing the Home key, then Menu Right twice, and finally the Enter key. Once you have determined the sequence for the app you want on your TV, follow these steps:

1. Sit in front of your device with It switched on (not on standby)
2. Hold down the App Shortcut key until the LED blinks twice.
3. Now perform the sequence of keys exactly as would normally. The remote will operate your TV and the macro is recorded in real time – so if it normally takes a few seconds for your device to react don’t worry.
4. Once you have finished the sequence – and the Streaming Service has started on your device – hold down the App Shortcut key until the LED blinks twice and goes out. The macro is now stored.

Tips

• Make sure the OFA remote Is operating the TV before programming
• If you find the Macro doesn’t work as expected, you can just repeat the same sequence to reprogram
• When programming, wait for your TV to respond first, the remote will remember the timing

RESET
If you would like to reset your remote back to its default settings, please do the following:

1. Hold down the Green and Yellow keys until the LED blinks twice
2. Press 977
3. The LED will blink 4 times and the remote is now reset.

AUDIO CODELIST

• A.V.International 0269
• Acoustic Solutions 1501, 1470
• Agile 0269
• Aiwa 0121, 0406, 0158, 0159
• Akai 4242, 0609
• Anam 0609
• Andersson 0493
• Arcam 0641, 0269, 0189
• Argos 4122
• AS 1501, 1470
• Audio Agile 0269
• Audio Pro 3264
• Audiolab 0269, 0189
• Auvisio 3654
• AVI 0269
• B & O 0799
• Bang & Olufsen 0799
• Bauhn 4242
• Blaupunkt 3654
• Bose 1229, 3708, 3079, 4024, 3832
• Bush 4122
• Cairn 0189
• Cambridge Audio 1730, 1647, 4157, 4222
• Canton 3000
• Carver 0189, 0269
• Celcus 4146
• Coby 3654
• Copland 0269
• Curtis Mathes 0039
• Denon 0004, 1360, 2857, 3347, 2516, 0272, 1260, 3380, 3639, 3947, 4111, 2681, 4551, 2502, 4025
• Dicra 3654
• DIKE 5070
• Dual 4134
• Dutch Originals 5070
• Energy Sistem 3654
• Epworth 0121, 0406, 0158, 0159
• Goodmans 4146, 0609, 2151, 1199
• Grundig 0189, 0269, 5174, 1199
• Harman/Kardon 1304, 0110, 1004, 3756, 4197, 0189, 0269
• HIFIAkademie 0269, 0189
• Hitachi 4590, 3050, 5130, 1199
• Horizon 4411
• IKEA 4050
• Inkel 0027
• Insten 2151
• Integra 1805, 2989, 2993, 1320, 3992, 0135
• Jay-tech 4146
• JBL 3756, 4575, 5070, 0110
• JTC 4146
• JVC 1400, 0074, 0464, 4411, 1199
• Kenwood 0313, 0027, 1400
• Kogan 3654
• LG 2676, 4043, 4667
• Linn 0269, 0189
• Loewe 0269, 0189
• Logik 4242
• Logitech 2436, 1408, 3561
• Magnat 4485
• Magnavox 0189, 1269, 3282, 0269
• Majority 4146
• Marantz 2117, 0189, 0269, 4673, 0039, 0641, 1269, 3347, 4556
• Maxell 3997
• MCS 0039
• Medion 4242
• Meridian 0715
• Micromega 0269, 0189
• Musical Fidelity 0688
• Myryad 0189, 0269
• NAD 0320, 1093, 1743, 0609
• Naim 1895
• Nakamichi 3296
• New Acoustic
• Dimension 0320, 1093, 1743, 0609
• Nikko 0609
• Nubert 4331
• Onkyo 1805, 0135, 1320, 2989, 2993, 3050, 4533, 3992
• Optimus 0300, 0013
• Orbitsound 4098
• Otone 4242
• Panasonic 0309, 1779, 4007, 3425, 0308, 0367, 0039
• Philips 1269, 0189, 2459, 4105, 3289, 2986, 1673, 0269, 3282, 0641
• Philips Magnavox 0189
• Pioneer 1935, 0013, 1459, 3742, 0300, 1284, 3629, 3631
• Polk Audio 0269, 0189
• Proficient 0609
• Proson 0609
• Pyle 4242
• Quasar 0039
• RCA 0300, 1459, 0082
• Restek 0189
• Revox 0140, 0189, 0269
• Rotel 0793
• Samsung 2660, 2809, 1199, 2137, 3822, 1304
• Sansui 0189, 0609
• Sanyo 3282
• Schaub Lorenz 4242
• Sentra 0688
• Sharp 3096, 5070
• Siemens 0609
• Sonos 3919
• Sony 0158, 0159, 2522, 1758
• Soundwave 0609 Sunfire 0313 Sungpo 3096, 5070
• T+A 2302, 1270
• Teac 0609, 1199, 3253, 4242
• Technics 0309, 0308, 0039, 0208
• TechniSat 4134, 4486
• Techwood 0609
• Teufel 4051, 3296, 3574, 4477,2322, 4159, 4460, 4559
• Thomson 1194, 3654
• Thorens 0269, 0189
• Toshiba 3627, 5070
• Universum 0609, 0269, 0189
• Victor 0074
• Wards 0013, 0158, 0189
• Yamaha 0176, 1276, 2061, 2467, 3283, 2469, 0082, 0848, 1176, 1949, 0354, 3267, 3602, 2342

References

• Home | One For All
• Home | One For All
• Guaranteed to work all brands - One For All Universal Remotes | One For All

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>