victsing BH500 Mini WiFi Projector Bluetooth User Manual
- June 6, 2024
- VicTsing
Table of Contents
BH500 Mini WiFi Projector Bluetooth
User Manual
Important Note: Please read the user manual carefully before use and keep it for future use.
IMPORTANT SAFETY PRECAUTIONS
Important: In order to get the best viewing effect, it’s suggested that you
use the product in a dark room.
Warning: Following safety, instructions can sus main product’s lifespan and
prevent it from firing or electric shock. so please read them carefully and
pay attention to all warnings.
- Do not install it in a place with poor ventilation.
- Do not install it in a hot or damp place.
- Do not block its ventilation holes (Intake or Exhaust).
- Do not install it in a dusty or smoky place.
- Do not install it near the temperature/smoke sensor. since it might make the sensor fail to work.
- Do not install it in a position directly blown by air condition. otherwise, it might be malfunctioned because of the water & vapor conden satin or high temperature.
Note: In order to maintain the performance and reliability of the projector.
please leave at least 30cm of space around the projector.
Note: The projector’s light is very bright. so please do not look at it
directly or point its light to your eyes in case of causing visual damage.
PACKING LIST
Note: Please check whether the accessories are complete after opening the package. If it’s not complate, please contact customer service for a replacement.
PRODUCT INTRODUCTION
Note: Due to the design improvement, the appearance/screen
printing/characters of the remote control might be somewhat different from the
real product, please in kind prevail.
Be cautious when using the remote control. Do not drop it, trample on it, or
spill any liquid into its body.
Do not put the remote control near any heat source.
Do not expose the remote control under sunlight.
Do not put the remote control in a damp place.
INSTALLATION AND DEBUGGING
Installation Methods
Referential Projection Distance
Turn Off Safely
Press the switch button on the operation panel or remote control. and turn off
the device accord ing to the system prompts.
PRODUCT SPECIFICATIONS
Product Name | Video Projector (Home Use) |
---|---|
Product Size | 215x172x75(mm) |
Display Technology | LCD |
Light Source | LED |
7ocusing Method | Manually Focus |
Keystone Correction | Manually Adjust(±15°) |
Screen Ratio | 4:3/16:9 |
LED Lifespan | 20,000 hours |
Native Resolution | 1280×720 Pixel |
input Resolution | 800x480P/1280x720P/ 1920x1080P |
Contrast Ratio | 2000:1 |
Input Ports | Audio Port/AV/USB 2.0/ HDMI/Type-C/VGA |
Projection Size | 40-300 inch |
Speaker | 2x(5W/41-1) |
Total Power | 68W |
Power Voltage | AC 100-240V (50-60Hz) |
PROJECTION SETTINGS
Phone Projection Setting
Note: If you want to play video in Netflix App, please connect the
projector to your device with an HDMI cable first. otherwise, the video on
Netflix can’t be projected directly because of the copyright.
We’re sorry for that and hope you could understand.
Android
- Turn on Wi-Fi on your Android device and connect it to the network.
- Enter into phone settings and select “Screen-sharing”, click it and find the device to connect PROJECTOR-XXXX.
Note: For different phone brands, the names of “screen-sharing” are
different.
Huawei: Wireless Projection/Multi-screen Interaction
Xiaomi: Wireless Display
Sony: Screen Mirroring
Samsung: Screen Sharing/Screen Mirroring/Allshare Cast Smart View
10S
Wireless Projection
Please connect the projector to the home network. the steps are as follows:
(IOS WIRELESS Wi-Fi Setting-Connect to Wi-Fi)
Please connect your mobile phone to the same network as the projector. please see the projection page for detailed operation.
Wired Projection
- Select the iOS projection function and enter. then select WIRED.
- Connect the projector to the phone with the USB data cable.
- Select ‘Trust” to allow the program to be used on your phone.
PROJECTION SETTINGS
Projector’s speaker supports phone connection. so it can be used as a phone
speaker.
Instructions
- Press the sound adjusting knob on the projector to switch to Bluetooth speaker mode.
- Turn on the corresponding function of the mobile phone and search the name of the projector.
Then click it to connect.
Note: In Bluetooth screen mode. you can press the OK button of the device and the OK button of the remote control to wake up.
MENU SETTING
Get the best viewing effect with the most appropriate settings. You could set some relative parameters according to the following steps.
- Press the menu button on the projector or remote control if you want to set it.
- You could set the parameter of the “Picture and “Sound” Press the buttons on the operation panel and select the range you want to set.
Note: When the projector is hung on the ceiling or in a system of rear projection, please change the projection mode.
Online upgrade system steps
Setting-Network-Upgrade By Network-Start
FCC STATEMENT:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received. including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonably protec tion against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy. if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However. there is no guarantee that interfer ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
ID Requirement
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
EU IMPORTER & POC FOR PRODUCT COMPLIANCE:
YooRen GmbH
] Tel: +493030809209
Add: Oberstra~e 88, 20149 Hamburg
E-mail: yooren.compliance@gmail.com
CUSTOMERS SERVICE CONTACT INFORMATION:
US: 1 518 660 1345
UK: 44 203 966 604 l
DE: 49 303 080 9212
ES. 34 911 236 068
F. 33 184 884 986
I T.39 80 068 4355
CA: l 587 787 l 649
support@victsing.com
@VictSing
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>