VictSing PC315A Wireless Gaming Keyboard User Manual

June 6, 2024
VicTsing

PC315A Wireless Gaming Keyboard
User Manual

Instructions

  1. Please charge the keyboard when using it for the first time.

  2. Take out the keyboard and turn on its switch. Take out the receiver behind its kickstands and plug it into the computer’s port
    VictSing PC315A Wireless Gaming Keyboard -
Instructions

  3. Wait for 3 seconds for the system to automatically install the driver and you can use it after that

Light Adjusting Buttons

  1. Press the LED button to turn on/off the light
  2. Press[ + to switch the light between constant-lighting mode and breathing mode.
  3. Press + aeons to increase brontoess Press + buttons to decrease brightness.

Multimedia Keys

FN+Fl FN+F2 FN+F3 FN+F4 FN+F5 FN+F6
Player Volume – Volume + Mute Stop Previous Track
FN+F7 FN+F8 FN+F9 FN+Fl 0 FN+Fl 1 FN+Fl 2
Play/Pause Next Track Email Homepage My Computer Calculator

FN+Win: Lock Win Key

Press + WIN key to lock the Win key, and press them again to unlock it.

Solutions for Keyboard Lag

  1. It could be due to the low battery. Please charge the keyboard.
  2. It could be due to the computer lag. Please reboot the computer and try it again.
  3. It could be due to the long using distance. The maximum working distance of the product is 1Om. Please keep the using distance between keyboard and receiver within 1Om. and there should be no big obstacles between them.

Solutions for Abnormal Connection

  1. Unplug the receiver. Turn off the keyboard and turn it on again.
  2. Replug the receiver into the computer’s port.
  3. Keep the distance between the keyboard’s indicator light and receiver within 1Om. Press the ESc+ buttons simultaneously for 3-5 seconds and the keyboard will enter into a code pairing state. It’ll start pairing code when the indicator light is flashing.
  4. The indicator light will go out after code pairing, and the keyboard will work normally after that.

VictSing PC315A Wireless Gaming Keyboard - Connection

Note
If the product is still unworkable after the above solutions, please repeat those steps for code pairing again. If your problems can’t get solved yet after that. please contact our customer service for help (Email: sup­port@victsing.com)

FCC STATEMENT:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference. and
  2. this device must accept any interference received. inter­ ference that may cause undesired operation.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals