MiBOXER WL1-P75V24 75W Dimming LED Driver User Manual

MiBOXER WL1-P75V24 75W Dimming LED Driver

Product feature

This product uses WiFi + Bluetooth + 2.4G wireless transmission technology, low power consumption, strong anti-interference ability. WiFi + Bluetooth connect network can greatly enhance the connect network experience. When the router is disconnected, Bluetooth can also directly connect and control equipment at close range. After successful network configuration using [MiBoxer Smart] APP to achieve wireless dimming, remote control, group control, scene control, timing control, music movement, biorhythm, sleep plan, wake plan, one key execution, automation,etc. functions. And it supports 2.4G remote control.

1. Dim brightness
2. Support remote control (control distance 30m)
3. Support scene customization
4. Timing setting / countdown turn on / off LED light
5. 2.4G wireless transmission technology
6. Dual white Dimming LED driver color temp. adjustable
7. Support music rhythm
8. Device sharing
9. Sleep/wakeup plan
10. Auto-transmitting (only for remote control dimming)
11. Smartphone APP control
12. Biorhythm
13. Tap-to-Run & automation
14. Support PUSH dimming
15. WiFi wireless control support long-range control
16. Support third party voice control
17. Group control
18. Do not disturb mode

Connection Diagram

75W Single Color Dimming LED Driver ( WiFi+2.4G ) Input: AC100V~240V 75W Dual White Dimming LED Driver ( WiFi+2.4G ) Input: AC100V~240V

Link Code / Unlink Code with remote

1. 4.1 Link code
2. Making dimming LED driver to enter Link code / Unlink code mode:
3. Method 1: short press ” SET ” button one time. Method 2: switch off dimming LED driver, switch on again after 10 seconds.
4. Short press zone ” ” or ” ” 3 times on remote within 3 seconds, light blinking 3 times slowly means the linking is done successfully.
5. 4.2 Unlink code
6. Making dimming LED driver to enter Link code / Unlink code mode:
7. Method 1: short press ” SET ” button one time. Method 2: switch off dimming LED driver, switch on again after 10 seconds.
8. Short press zone ” ” or ” ” 5 times on remote within 3 seconds, light blinking 10 times quickly means the unlinking is done successfully.
9. 4.3 Compatible with following remote controls (Purchase separately)
10. Auto-transmitting (only for remote control)
11. 5.1. Signal transmitting Dimming LED driver can transmit the signals from the remote control to another one within 30m, as long as there is dimming LED driver within 30m, the remote control distance is unlimited.
12. Attention
13. 6.1. Please check whether the voltage of the power supply is in accordance with the dimming LED driver, and please check the connection of both the cathode and anode, otherwise the controller will be broken.
14. 6.2. Please do not use the controller in the place with widely range metal area or strong electromagnetic wave nearby, otherwise, the remote distance will be affected seriously.
15. 6.3. Non-professional users are not allowed to disassemble the equipment directly, otherwise the equipment may be damaged.

APP control

1. Click ” device ” or ” group ” you want to control on homepage to enter control page, where you can control color, saturation, brightness, color temperature, and scene.

2.  Click music to enter music rhythm mode, light will change with rhythm of music.
   Note: Music rhythm mode requires phone keep on this page.

3.  Click ” More ” to enter biorhythm, timing, sleep plan, wake plan, power-on response setting.

4. After opening the ” Do Not Disturb Mode ” in the power-on response, turn on laight needs power on twice when light is powered off in the off state. (Applicable for frequent power outages area to save energy)

Device name editing, third-party control, device sharing, group control.

1. ” on the upper right corner of control page to enter edit page, where you can modify device name, icon, etc.
2. Click icon under third-party control to view detailed description of third-party control.
3. Click ” Share Device ” to share device with family and friends.
4. Click ” Create Group ” and follow APP prompt after setting is completed, the device can be controlled by group.

Intelligent control

1. Click ” Smart ” at the bottom.
2. Click ” + ” in the upper right corner to create intelligent control.
3. In the page of creating smart, you can set command to be executed under the specified conditions (such as: turn on or turn off light, color, brightness, mode, etc.)

Support Amazon Alexa Control

Please search ” Smart Life ” skill in Alexa APP and activate the skill.

Support Google Home Control

Please search ” Smart Life ” skill in Google Home APP and activate the skill.

Bluetooth control instructions

When the router is disconnected, you can turn on the Bluetooth of your smartphone and connect the directly controlled device at a short distance.

Switching Bluetooth control steps:

1.  Complete the network distribution of the equipment.
2. Power off the router used for network configuration, turn off WiFi on the mobile phone, turn on Bluetooth, and wait for about 3-5 minutes to control.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>