Baseus Orange Dot Wireless Presenter Red Laser Charging User Manual

: June 6, 2024
: Baseus

Table of Contents

Baseus Orange Dot Wireless Presenter Red Laser Charging
I. Product Introduction and Accessories
Instructions for Use
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Baseus Orange Dot Wireless Presenter Red Laser Charging

I. Product Introduction and Accessories

This product is an electronic product specially designed for computers and multimedia projection. In addition to the traditional laser pointer function, it can also remotely control the computer to turn the page by simply pressing the page up and down buttons.Users can move freely in the classroom or presentation hall to get closer to the audience for better interaction, and turn the page, freely and easily to give a wonderful performance. It can be widely used in product demonstrations, audiovisual education, conferences, training, and more.

Accessories List

PPT presenter 1PCS
0.5m USB to Type C data cable 1PCS
User Manual 1PCS
Warranty Card 1PCS

II. Product Specifications
Main material: ABS+PC

Working frequency: 2400-2490MHz
Laser distance: 100m (Max.)
Laser type: Class II <1Mw
Laser color: Red
Laser wavelength: 650nm
Battery: 250mAh lithium battery
Battery type: Lithium polymer battery
Rated capacity: 250mAh
Shutdown power consumption: 0.1uA (battery self-discharge) 2.11 Standby power consumption: 19-25uA (typical value: 22uA) 2.12 Operating system: Windows, Apple OS, Linux, etc.
Compatible interfaces: USB interface, Type-C interface 2.14 Product size: 1433014mm
Product weight: 37.5±5g

Instructions for Use

Appearance and Interfaces

No.

|

Name

|

Function Description

---|---|---
1| Laser indicator light| Working status indicator
2| Page up button| Short press supports page up, long press supports full screen or exit full screen
3| Page down button| Short press supports page down, long press supports black screen or

exits black screen

4

| Type-C charging port| 5V/0.5A
5| Laser button| You can use the laser when pressing (Note: The laser cannot irradiate the eyes, it will cause serious eye damage)

6

|

Hyperlink button

| Press the button to select the hyperlink, double press to open the hyperlink, and long press to switch between open windows.
7| Volume up/down button| Control the volume
8| Power switch| Control the power of the product

9

| USB & Type-C

receiver

| Used to connect notebooks, support USB interface and Type-C

interface notebook

Function Description
Insert the receiver on the bottom of the presenter into the USB interface or Type-C interface of a computer after install the battery, then press the power button and open a PPT file at the same time, and point at the screen or other display devices to start the demonstration.

Cautions

Do not disassemble, bump, crush or throw it into fire!
If severe expansion occurs, please stop using it!
Do not place it in high temperature environment!
Do not aim the laser at your eyes or the eyes of others, as it may cause serious eye injuries.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Do not repair or replace any part of the device yourself (unless specifically instructed in this manual). Please ask your distributor or authorized agents to repair the product.