proceq GP8000 GPR Live Portable Ground Penetrating radar User Guide
- June 6, 2024
- proceq
Table of Contents
Proceq GPR Live
GP8000 |GP8800 | GP8100
Quick Start Guide & Product Certificates
a. Ensure correct polarity when inserting the rechargeable AA batteries.
Alternatively, you can use non-rechargeable AA batteries. Warning: do not
charge non-rechargeable AA batteries!
b. Do not leave the batteries in the pack during storage for longer than 3
months. Remove the AA batteries by following the reverse procedure.
c. Green: charging; off: charging complete; red: AA batteries incorrectly
inserted, or temperature limit exceeded.
a. Always ensure that the wheel assembly is securely attached with the screw.
b. Always secure the wrist loop with the screw and use it when operating the
product.
c. Always use the cover when operating the device with an external power
source.
d. 5V DC 2A power bank not included.
a. Green: charging; off: finished charging; orange: almost fully charged,
temperature limit exceeded (wait or disconnect); red: AA cells incorrectly
inserted or temperature limit exceeded (wait or disconnect). Do not let the
battery pack discharge for longer than one month.
b. Always use and secure the wrist loop with the screw when operating the
product. Beim Bedienen des Gerätes immer Handschlaufe verwenden und mit der
Schraube sichern.
a. Green: charging; off: finished charging; orange: almost fully charged,
temperature limit exceeded (wait or disconnect); red: AA cells incorrectly
inserted or temperature limit exceeded (wait or disconnect). Do not let the
battery pack discharge for longer than one month.
b. Always use and secure the wrist loop with the screw when operating the
product. Beim Bedienen des Gerätes immer Handschlaufe verwenden und mit der
Schraubsichern.
Apple® App Store > “Proceq GPR Live”
https://apps.apple.com/us/app/proceq-gpr-live/id1240095180
Create your account
Register the probe
f. Scanning the QR code is only needed once, for the initial setup.
Products: Proceq GP8000, Proceq GP8800
Proceq Part Numbers: 393 10 xxx, 393 30 xxx, 393 70 xxx
Manufacturer: Proceq SA, Ringstrasse 2
8603 Schwerzenbach, Switzerland
We confirm that the Proceq GP8000, Proceq GP8800, and Proceq GP8100 products
conform with the following directives and standards:
Health: EN 62749:2010
Safety standards: EN 61010-1:2010
Laser classification: EN 60825-1:2014
IP classification: IP 54
Battery directive: 2006/66/EC
Restriction of hazardous substances (RoHS): 2011/65/EC
The conformity is based on all essential and specific radio test suites for
that radio equipment category identified by the involved Notified Body.
Proceq GP8000: the notified body IMQ S.p.A. (identification number 0051)
performed the EU-type examination in compliance with Annex III Module B of the
2014/53/EU Directive and issued the EU-type examination Certificate No.
0051-RED-0043. The frequency range is 200 MHz to 4000 MHz with a maximum
output power of ≤ -14 dBm (conducted).
Proceq GP8800: the notified body Timco Engineering, Inc. (identification
number 1177) performed the EU-type examination in compliance with Annex III
Module B of the 2014/53/EU Directive and issued the EU-type examination
Certificate No. 0048-190607-01CE.
The frequency range is 400 MHz to 6000 MHz with a maximum output power of ≤
-14 dBm (conducted).
Proceq GP8100: the notified body Timco Engineering, Inc. (identification
number 1177) performed the EU-type examination in compliance with Annex III
Module B of the 2014/53/EU Directive and issued the EU-type examination
Certificate No.
XXXXXXXXXXXXX. The frequency range is 400 MHz to 4000 MHz with a maximum
output power of ≤ -14 dBm (conducted).
All devices comply with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Schwerzenbach, 20.05.2019
Patrick Waller
Chief Operating Officer
Swiss Made Declaration
Products: Proceq GP8000, Proceq GP8800
Proceq Part Numbers: 393 10 xxx, 390 30 xxx, 393 70 xxx
Manufacturer: Proceq SA, Ringstrasse 2 8603 Schwerzenbach, Switzerland
We confirm that the Proceq GP8000, Proceq GP8800 instrument was developed and
manufactured in Switzerland and fulfills the requirements needed for the
declaration “Made in Switzerland” or “Swiss Made”.
The requirements for industrial products are specified in detail in the
National Swiss Trademark Protection Statute (Art. 47-50, MSchG) covering goods
and services.
Schwerzenbach, 20.05.2019
Patrick Waller
Chief Operating Officer
Notice
This document (incl. Quick Start Guide and Product Certificates) constitutes
an integral part of Proceq’s General Terms and Conditions of Sale and General
Terms and Conditions of Rental, together with any other guideline,
precautions, policies, and conditions which Proceq has made and may make
available to you at
www.proceq.com/downloads, as amended from
time to time (the Documents). Proceq reserves the right to change without
notice any information, specifications, and recommendations contained in this
document and in any of the associated Documents.
You shall observe and be solely responsible for the safe and lawful use of
this product, as well as your conduct while using it and any consequences
arising thereof. The use and operation of this product is at your own
discretion and risk. Proceq hereby disclaims any and all loss, liability or
damages resulting from or out of your use of the product. Please ensure you
operate and use this product only for purposes that are proper and in
accordance with the instructions given herein together with all safety and
health precautions, applicable laws, rules, regulations, and as provided for
in any of the Documents.
For safety and liability information, please download at
www.proceq.com/downloads Subject to change.
Copyright © 2019 by Proceq SA, Schwerzenbach. All rights reserved.
Proceq Europe
Ringstrasse 2
CH-8603 Schwerzenbach
Switzerland
+41 43 355 38 00
[email protected]| Proceq Rus LLC
Ul. Optikov 4
korp. 2, lit. A, Office 410
197374 St. Petersburg
Russia
+7 812 448 35 00
[email protected]
---|---
References
- Screening Eagle Technologies - Protect The Built World - Protect The Built World
- Download - Protect The Built World