proceq 54257 Equotip 2 Portable Hardness Tester User Guide
- June 5, 2024
- proceq
Table of Contents
54257 Equotip 2 Portable Hardness Tester
User Guide
This Quick Start Guide does not replace the Operating Instructions of this
product. For complete instructions and safe handling information, see the
Operating Instructions:
Touchscreen Unit: Information → Documents Screening Eagle Website:
www.screeningeagle.com
Getting Started
Battery Installation
To install the battery, remove the protection foil and lift the stand as shown. Insert the battery and fasten it in place with the screw.
Load Battery
The battery must first be charged 8 hours before use.
Connect through the power supply connection. A Quick Charger (32701053) is
available (full charging < 5.5 h).
Connect the Probe
For Leeb, Probes use the Snap-in connector 1.
For UCI Probe use the Snap-in connectors 1 or 2.
For the Portable Rockwell
Probe uses the USB Host connector.
Hardware Connections
USB Host:
Additionally connect a mouse, keyboard, or USB stick.
USB Device:
Connect to PC.
Ethernet:
Connection to network.
Power Supply:
Connect the power supply through this connection.
Start the Instrument
Press Power ON/OFF to power on.
Software Upgrade
It is recommended to check for firmware upgrades before using the instrument
for the first time. (See Equotip Link).
Main Menu
On start-up, the main menu is displayed. All functions are accessible directly
via the Touchscreen.
Return to the previous menu by pressing the Back Button or the return icon
(arrow) at the top left of the Touchscreen.
| Measurement
Measurement screen.
---|---
| Settings
Application settings; See Operating Instructions for details.
| Data
File manager; review of saved measurements on the instrument.
| Wizards
Predefined workflows to increase process reliability and time efficiency.
| Information
Contains comprehensive Operating Instructions and important device
information.
| System
Define your interface language, date, time, and other system settings.
| Power off
Switch off the device.
Equotip Link
Download and Install the Equotip Link: www.screeningeagle.com. Connect the instrument to a PC using the USB cable provided. Make sure you are connected to the Internet.
Click on the PQ-Upgrade icon to check for software updates.
Updates should be performed periodically to take advantage of Proceq’s continuous firmware development.
NOTES
Proceq Europe
Ringstrasse 2
8603 Schwerzenbach
Zurich | Switzerland
T +41 43 355 38 00| Proceq Rus LLC
Ul. Optikov, 4-2A office 410
197374 Saint-Petersburg | Russia
T +7 812 448 35 00
---|---
Proceq UK Ltd.
Bedford i-lab, Stannard Way
Priory Business Park
MK44 3RZ Bedford
London | United Kingdom
T +44 12 3483 4645| Proceq Middle East
Sharjah Airport International
Free Zone | P.O.Box: 8365
United Arab Emirates
T +971 6 5578505
Proceq USA, Inc.
117 Corporation Drive
Aliquippa, PA 15001 | USA
T +1 724 512 0330| Proceq SAO Ltd.
Rua Paes Leme 136 | Pinheiros,
Sao Paulo, SP 05424-010 | Brasil
T +55 11 3083 3889
Proceq Asia Pte Ltd.
1 Fusionopolis Way
Connexis South Tower #20-02
Singapore 138632
T +65 6331 4151| Proceq China
Room 701, 7th Floor, Golden Block
407-1 Yishan Road, Xuhui District
200032 Shanghai
China
T +86 21 6317 7479
Subject to change. Copyright © 2022 by Proceq SA, Schwerzenbach. All rights
reserved.
82035603 ver 06 2018
References
- Screening Eagle Technologies - Protect The Built World - Protect The Built World
- Screening Eagle Technologies - Protect The Built World - Protect The Built World
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>