MARSON MT110L SBR Laser Scanner User Manual

: June 15, 2024
: MARSON

Table of Contents

MT110L SBR Laser Scanner
Product Information
Specifications
- Product Usage Instructions
Chapter 1: Introduction
Chapter 2: General Settings
Chapter 3: Interface
Chapter 4: Reading Mode
Chapter 5: Data Format
Chapter 6: Symbologies

MT110L SBR Laser Scanner

Product Information

Specifications

Light Source: SBR Laser
Sensor Scan Rate: N/A
Resolution: N/A
Scan Angle: N/A
Pitch Angle: N/A
Skew Angle: N/A
Roll Angle: N/A
Print Contrast Ratio: N/A
Width of Field: N/A
Memory: N/A
Typical D.O.F (Environment: 800 lux): N/A
Dimension: W27.5 x L68.4 x H16.2 mm
Weight: 27g
Color: Black / White
Material: PC
Cable: Micro(M) to USB A(M) Cable, 1.5M
Trigger Indicator: LED, Buzzer, Vibrator
Operation Voltage: N/A
Working Current: N/A
Standby Current: N/A
Battery: N/A
Number of Scan (per full charge): N/A
Connectivity: N/A
Radio Range: N/A
User Environment:
- Operating Temperature: N/A
- Storage Temperature: N/A
- Humidity: N/A
- Drop Durability: N/A
- Ambient Light: N/A
1D Symbologies:
- 5 Mil Code 39: 29 ~ 108mm
- 10 Mil Code 39: 33 ~ 201mm
- 15 Mil Code 39: 43 ~ 294mm
- 13 Mil UPC/EAN: 42 ~ 243mm

Product Usage Instructions

Chapter 1: Introduction

This user’s manual is dedicated to MT110L, an SBR Laser scanner
that enables wireless scanning for mobile operators who work with
smartphones or other mobile devices of iOS and Android platform.
With built-in Bluetooth 5.0 technology, MT110L offers 20-meter
wireless freedom to mobile operators.

Chapter 2: General Settings

This chapter provides information on the general settings of the
MT110L SBR Laser scanner.

Chapter 3: Interface

This chapter explains the interface options and settings of the
MT110L SBR Laser scanner.

Chapter 4: Reading Mode

This chapter provides instructions on how to use the reading
mode of the MT110L SBR Laser scanner.

Chapter 5: Data Format

This chapter explains the data format options and settings of
the MT110L SBR Laser scanner, including how to clear the
preamble/postamble and set the terminator.

Chapter 6: Symbologies

This chapter provides information on the supported symbologies
of the MT110L SBR Laser scanner, including general settings and
specific symbologies like UPC-A.

FAQ

Q: What is the wireless range of the MT110L scanner?

A: The MT110L scanner offers a wireless range of 20 meters.

MT110L User’s Manual V1.0
MT110L SBR Laser Scanner
User’s Manual

Version 1.0

DATE: 2022/07/28

Table of Content

MT110L User’s Manual V1.0

CHAPTER 1 INTRODUCTION …………………………………………………………………………………………………………………………….. 7

SPECIFICATIONS ………………………………………………………………………………………………………………………………………………………. 7 BEEPER INDICATION………………………………………………………………………………………………………………………………………………….. 9 LED INDICATION …………………………………………………………………………………………………………………………………………………….. 10

CHAPTER 2 GENERAL SETTINGS…………………………………………………………………………………………………………………… 11

BARCODE CONFIGURABILITY ……………………………………………………………………………………………………………………………………. 11 FACTORY DEFAULT …………………………………………………………………………………………………………………………………………………. 11 CHECK VERSION …………………………………………………………………………………………………………………………………………………….. 11 LASER BRIGHTNESS………………………………………………………………………………………………………………………………………………… 12 ILLUMINATION …………………………………………………………………………………………………………………………………………………………. 12 GOOD READ INDICATOR ………………………………………………………………………………………………………………………………………….. 13
Beep Tone ……………………………………………………………………………………………………………………………………………………….. 13 Beep Mode ………………………………………………………………………………………………………………………………………………………. 13 Vibrator …………………………………………………………………………………………………………………………………………………………….. 13 DATA FORMAT………………………………………………………………………………………………………………………………………………………… 14 HT/CR/ESC Converts to TAB/ENTER/ESCAPE ………………………………………………………………………………………………. 14 Function Code Conversion……………………………………………………………………………………………………………………………….. 14 Numeric Key …………………………………………………………………………………………………………………………………………………….. 15 Capslock Mode ………………………………………………………………………………………………………………………………………………… 15 Keyboard Layout………………………………………………………………………………………………………………………………………………. 16 Intercharacter Delay …………………………………………………………………………………………………………………………………………. 18 Interblock Delay ……………………………………………………………………………………………………………………………………………….. 18 BCC (Binary Check Character) ………………………………………………………………………………………………………………………… 19 IMAGING SETTINGS …………………………………………………………………………………………………………………………………………………. 19 Inverse Barcode ……………………………………………………………………………………………………………………………………………….. 19

CHAPTER 3 INTERFACE………………………………………………………………………………………………………………………………….. 20

BT HID………………………………………………………………………………………………………………………………………………………………….. 20 Getting Connected……………………………………………………………………………………………………………………………………………. 20 Pincode Setup ………………………………………………………………………………………………………………………………………………….. 21
BT SPP…………………………………………………………………………………………………………………………………………………………………. 22 Getting Connected……………………………………………………………………………………………………………………………………………. 22 Set SPP Pincode ……………………………………………………………………………………………………………………………………………… 23
GENERAL BLUETOOTH SETTINGS……………………………………………………………………………………………………………………………… 24 Power Off Timeout……………………………………………………………………………………………………………………………………………. 24 Shut Down ……………………………………………………………………………………………………………………………………………………….. 24 iOS Touch Keyboard ………………………………………………………………………………………………………………………………………… 25 Secure Simple Pairing (SSP)……………………………………………………………………………………………………………………………. 25 Batch Mode………………………………………………………………………………………………………………………………………………………. 25 Set Bluetooth Device ID……………………………………………………………………………………………………………………………………. 26

MT110L User’s Manual V1.0 Check Bluetooth Firmware Version ………………………………………………………………………………………………………………….. 26 Check Device MAC Address…………………………………………………………………………………………………………………………….. 27 Check Host MAC Address………………………………………………………………………………………………………………………………… 27 Check Battery Life ……………………………………………………………………………………………………………………………………………. 27 ScanLink ………………………………………………………………………………………………………………………………………………………….. 28 MEMORY MODE ……………………………………………………………………………………………………………………………………………………… 29 Delete Last Record…………………………………………………………………………………………………………………………………………… 29 Clear All Record ……………………………………………………………………………………………………………………………………………….. 29 Data Format……………………………………………………………………………………………………………………………………………………… 30 Field Separator…………………………………………………………………………………………………………………………………………………. 30 Date Format……………………………………………………………………………………………………………………………………………………… 31 Time Format …………………………………………………………………………………………………………………………………………………….. 31 Date & Time Setup …………………………………………………………………………………………………………………………………………… 32 USB HID……………………………………………………………………………………………………………………………………………………………….. 33 USB VCP ……………………………………………………………………………………………………………………………………………………………… 33
CHAPTER 4 READING MODE ………………………………………………………………………………………………………………………….. 34
TRIGGER MODE ……………………………………………………………………………………………………………………………………………………… 34 TOGGLE MODE……………………………………………………………………………………………………………………………………………………….. 34 FLASH MODE………………………………………………………………………………………………………………………………………………………….. 34 CONTINUOUS MODE ……………………………………………………………………………………………………………………………………………….. 35 CONTINUOUS AUTO OFF MODE ……………………………………………………………………………………………………………………………….. 35
Flash / Continuous Mode Trigger Control………………………………………………………………………………………………………. 35 Trigger / Toggle Mode LED Auto-Off Control…………………………………………………………………………………………………. 36 Trigger / Toggle / Flash / Continuous Auto Off Mode LED Auto-Off Timeout …………………………………………………. 36 Flash / Continuous / Continuous Auto Off Mode Identical Read Interval………………………………………………………… 37 ACCURACY ADJUSTMENT ………………………………………………………………………………………………………………………………………… 37
CHAPTER 5 DATA FORMAT…………………………………………………………………………………………………………………………….. 38
CODE ID ………………………………………………………………………………………………………………………………………………………………… 38 SET ID …………………………………………………………………………………………………………………………………………………………………… 38 DATA LENGTH ………………………………………………………………………………………………………………………………………………………… 40 PREAMBLE……………………………………………………………………………………………………………………………………………………………… 41 POSTAMBLE……………………………………………………………………………………………………………………………………………………………. 41
Clear Preamble/Postamble ………………………………………………………………………………………………………………………………. 41 TERMINATOR ………………………………………………………………………………………………………………………………………………………….. 42
CHAPTER 6 SYMBOLOGIES ……………………………………………………………………………………………………………………………. 43
GENERAL SETTINGS ……………………………………………………………………………………………………………………………………………….. 43 UPC-A ………………………………………………………………………………………………………………………………………………………………….. 43
Enable/Disable UPC-A……………………………………………………………………………………………………………………………………… 43 Lead Digit …………………………………………………………………………………………………………………………………………………………. 43 Check Digit ………………………………………………………………………………………………………………………………………………………. 44
3

MT110L User’s Manual V1.0 UPC-A Expand to EAN-13 ……………………………………………………………………………………………………………………………….. 44 Add On Supplement …………………………………………………………………………………………………………………………………………. 44 UPC-E ………………………………………………………………………………………………………………………………………………………………….. 45 Enable/Disable UPC-E……………………………………………………………………………………………………………………………………… 45 UPC-E System Number ……………………………………………………………………………………………………………………………………. 45 Lead Digit …………………………………………………………………………………………………………………………………………………………. 46 Check Digit ………………………………………………………………………………………………………………………………………………………. 46 UPC-E Expand to UPC-A …………………………………………………………………………………………………………………………………. 46 Add On Supplement …………………………………………………………………………………………………………………………………………. 46 EAN-8 …………………………………………………………………………………………………………………………………………………………………… 48 Enable/Disable EAN-8 ……………………………………………………………………………………………………………………………………… 48 Lead Digit …………………………………………………………………………………………………………………………………………………………. 48 Check Digit ………………………………………………………………………………………………………………………………………………………. 48 EAN-8 Expand to EAN-13 (Zero Extension)……………………………………………………………………………………………………… 48 Add On Supplement …………………………………………………………………………………………………………………………………………. 49 EAN-13…………………………………………………………………………………………………………………………………………………………………. 50 Enable/Disable EAN-13 ……………………………………………………………………………………………………………………………………. 50 Lead Digit …………………………………………………………………………………………………………………………………………………………. 50 Check Digit ………………………………………………………………………………………………………………………………………………………. 50 Add On Supplement …………………………………………………………………………………………………………………………………………. 50 ISBN ………………………………………………………………………………………………………………………………………………………………… 51 ISSN ………………………………………………………………………………………………………………………………………………………………… 52 ISMN ………………………………………………………………………………………………………………………………………………………………… 52 CODE 128 ……………………………………………………………………………………………………………………………………………………………… 53 Enable/Disable Code 128…………………………………………………………………………………………………………………………………. 53 Code 128 Min/Max Length ……………………………………………………………………………………………………………………………….. 53 GS1-128(UCC/EAN 128)………………………………………………………………………………………………………………………………………. 54 Enable/Disable GS1-128 ………………………………………………………………………………………………………………………………….. 54 GS1-128 AIM ID……………………………………………………………………………………………………………………………………………….. 54 FUNC 1 Character ……………………………………………………………………………………………………………………………………………. 54 GS1-128 Min/Max Length ………………………………………………………………………………………………………………………………… 55 CODE 39 ……………………………………………………………………………………………………………………………………………………………….. 56 Enable/Disable Code 39 …………………………………………………………………………………………………………………………………… 56 Verification ……………………………………………………………………………………………………………………………………………………….. 56 Start/Stop …………………………………………………………………………………………………………………………………………………………. 56 Full ASCII Code39 ……………………………………………………………………………………………………………………………………………. 57 Code39 Min/Max Length ………………………………………………………………………………………………………………………………….. 57 CODE 32 ……………………………………………………………………………………………………………………………………………………………….. 58 Enable/Disable Code 32 …………………………………………………………………………………………………………………………………… 58 Leading/Tailing …………………………………………………………………………………………………………………………………………………. 58 CODE 93 ……………………………………………………………………………………………………………………………………………………………….. 59 Enable/Disable Code 93 …………………………………………………………………………………………………………………………………… 59
4

MT110L User’s Manual V1.0 Code 93 Min/Max Length …………………………………………………………………………………………………………………………………. 59 CODE 11 ……………………………………………………………………………………………………………………………………………………………….. 60 Enable/Disable Code 11 …………………………………………………………………………………………………………………………………… 60 Verification ……………………………………………………………………………………………………………………………………………………….. 60 Check Digit ………………………………………………………………………………………………………………………………………………………. 60 Code 11 Min/Max Length …………………………………………………………………………………………………………………………………. 61 CODABAR (NW-7)…………………………………………………………………………………………………………………………………………………… 62 Enable/Disable Codabar…………………………………………………………………………………………………………………………………… 62 Start/Stop …………………………………………………………………………………………………………………………………………………………. 62 Verification ……………………………………………………………………………………………………………………………………………………….. 63 Codabar Min/Max Length …………………………………………………………………………………………………………………………………. 63 CLSI Format …………………………………………………………………………………………………………………………………………………….. 64 ABC- Codabar …………………………………………………………………………………………………………………………………………………… 64 CX- Codabar……………………………………………………………………………………………………………………………………………………… 65 Codabar Coupling…………………………………………………………………………………………………………………………………………….. 66 INTERLEAVED 2 OF 5……………………………………………………………………………………………………………………………………………….. 67 Enable/Disable Interleaved 2 of 5 …………………………………………………………………………………………………………………….. 67 Verification ……………………………………………………………………………………………………………………………………………………….. 67 First / Last Digit Suppressed …………………………………………………………………………………………………………………………….. 67 Interleaved 2 of 5 Min/Max Length……………………………………………………………………………………………………………………. 68 IATA (STANDARD 2 OF 5)………………………………………………………………………………………………………………………………………… 69 Enable/Disable IATA ………………………………………………………………………………………………………………………………………… 69 Verification ……………………………………………………………………………………………………………………………………………………….. 69 IATA Min/Max Length……………………………………………………………………………………………………………………………………….. 69 MATRIX 2 OF 5 ……………………………………………………………………………………………………………………………………………………….. 70 Enable/Disable Matrix 2 of 5 …………………………………………………………………………………………………………………………….. 70 Verification ……………………………………………………………………………………………………………………………………………………….. 70 Matrix 2 of 5 Min/Max Length……………………………………………………………………………………………………………………………. 71 INDUSTRIAL 2 OF 5 ………………………………………………………………………………………………………………………………………………….. 72 Enable/Disable Industrial 2 of 5………………………………………………………………………………………………………………………… 72 Verification ……………………………………………………………………………………………………………………………………………………….. 72 Industrial 2 of 5 Min/Max Length ………………………………………………………………………………………………………………………. 72 CHINA POSTAL CODE (TOSHIBA CODE) …………………………………………………………………………………………………………………….. 74 Enable/Disable China Postal Code …………………………………………………………………………………………………………………… 74 Verification ……………………………………………………………………………………………………………………………………………………….. 74 China Postal Code Min/Max Length …………………………………………………………………………………………………………………. 74 MSI PLESSEY…………………………………………………………………………………………………………………………………………………………. 75 Enable/Disable MSI Plessey …………………………………………………………………………………………………………………………….. 75 Verification ……………………………………………………………………………………………………………………………………………………….. 75 Check Digit ………………………………………………………………………………………………………………………………………………………. 75 MSI Plessey Min/Max Length …………………………………………………………………………………………………………………………… 76 UK PLESSEY ………………………………………………………………………………………………………………………………………………………….. 77
5

MT110L User’s Manual V1.0 Enable/Disable UK Plessey ……………………………………………………………………………………………………………………………… 77 Verification ……………………………………………………………………………………………………………………………………………………….. 77 TELEPEN………………………………………………………………………………………………………………………………………………………………… 77 Enable/Disable Telepen……………………………………………………………………………………………………………………………………. 77 Output Format ………………………………………………………………………………………………………………………………………………….. 77 GS1 DATABAR (RSS-14) ……………………………………………………………………………………………………………………………………….. 78 Enable/Disable GS1 DataBar …………………………………………………………………………………………………………………………… 78 Enable/Disable GS1 DataBar Stacked / Omnidirectional ………………………………………………………………………………….. 78 Prefix AI……………………………………………………………………………………………………………………………………………………………. 78 Check Digit ………………………………………………………………………………………………………………………………………………………. 78 GS1 DATABAR LIMITED (RSS-LIMITED)……………………………………………………………………………………………………………………. 79 Enable/Disable GS1 DataBar Limited ………………………………………………………………………………………………………………. 79 Prefix AI……………………………………………………………………………………………………………………………………………………………. 79 Check Digit ………………………………………………………………………………………………………………………………………………………. 79 GS1 DATABAR EXPANDED (RSS-EXPANDED)…………………………………………………………………………………………………………… 79 Enable/Disable GS1 DataBar Expanded ………………………………………………………………………………………………………….. 79 Enable/Disable GS1 DataBar Expanded Stacked …………………………………………………………………………………………….. 80 GS1 DataBar Expanded Min/Max Length …………………………………………………………………………………………………………. 80 CHAPTER 7 APPENDIX ……………………………………………………………………………………………………………………………………. 81 APPENDIX – NUMBERS …………………………………………………………………………………………………………………………………………….. 81 APPENDIX – UPPER CASE ALPHABETS ………………………………………………………………………………………………………………………. 82 APPENDIX – LOWER CASE ALPHABETS………………………………………………………………………………………………………………………. 84 APPENDIX CONTROL CODES …………………………………………………………………………………………………………………………………. 86 APPENDIX SYMBOLS …………………………………………………………………………………………………………………………………………….. 88 APPENDIX FUNCTION KEYS …………………………………………………………………………………………………………………………………… 91 APPENDIX NAVIGATION KEYS ………………………………………………………………………………………………………………………………… 92 APPENDIX MODIFIER KEYS ……………………………………………………………………………………………………………………………………. 93 APPENDIX – ABORT …………………………………………………………………………………………………………………………………………………. 94 APPENDIX – DEFAULT TABLE ……………………………………………………………………………………………………………………………………. 95 APPENDIX – FACTORY ID AND AIM ID TABLE……………………………………………………………………………………………………………. 101 APPENDIX – ASCII TABLE ………………………………………………………………………………………………………………………………………. 103 VERSION HISTORY ………………………………………………………………………………………………………………………………………… 107
6

Chapter 1 Introduction

MT110L User’s Manual V1.0

This user’s manual is dedicated to MT110L, an SBR Laser scanner that enables wireless scanning for mobile operators who work with smartphones or other mobile devices of iOS and Android platform. With built-in Bluetooth 5.0 technology, MT110L offers 20-meter wireless freedom to mobile operator.

LED Indicator
Function Button/ Toggle iOS keyboard

Micro USB port
(with protective cover)

Exit Window

Trigger Button

Specifications

Hardware Reset Button
(insert pin into the hole at the bottom)

Optic & Performance
Light Source
Sensor Scan Rate Resolution Scan Angle Pitch Angle Skew Angle Roll Angle Print Contrast Ratio Width of Field Memory Typical D.O.F

650nm visible red Laser Visible white LED Linear Image Sensor 380 Scans/Sec 4mil/ 0.1mm 41° ±30° ±40° ±20° 30% 140mm (13Mil Code39) 2MB (20,000 barcodes) 4 Mil Code 39 : 34 ~ 84mm
7

(Environment: 800 lux)
Physical Characteristics Dimension Weight Color Material Cable Trigger Indicator Electrical Operation Voltage Working Current Standby Current Battery Number of Scan (per full charge) Connectivity Radio Range
Interface/ Profile
User Environment Operating Temperature Storage Temperature Humidity Drop Durability Ambient Light
1D Symbologies

5 Mil Code 39 : 29 ~ 108mm 10 Mil Code 39 : 33 ~ 201mm 15 Mil Code 39 : 43 ~ 294mm 13 Mil UPC/EAN : 42 ~ 243mm

MT110L User’s Manual V1.0

W27.5 x L68.4 x H16.2 mm 27g Black / White PC Micro(M) to USB A(M) Cable, 1.5M Scan Button Function Button LED, Buzzer, Vibrator
3.7 VDC ± 5% < 170mA < 60mA 3.7V, 400mAh, Li-Polymer Battery 5400 scans (1 scan/ 5 secs, Bluetooth connected)

Bluetooth 5.0 dual mode (Class 2) 66 ft/ 20m (line of sight) BT HID BT SPP USB HID USB VCP Memory
-10 ~ 50°C -20 ~ 60°C 0% ~ 95%RH (Non-condensing) 1.5M 50,000 Lux (Sunlight) UPC-A/UPC-E, EAN-8/EAN-13, Industrial 2 of 5, Codabar, Matrix 2 of 5, Code 11, Code 93, Code 32, Code 128, Standard Code 39, Full ASCII Code 39, Interleaved 2 of 5, China Postal Code, MSI Plessy Code, UK Plessy Code, EAN/UCC 128, Telepen Code, IATA

Regulatory ESD
EMC/RF
Safety Approval Environmental Medical Compliance (MT110LM only)

Code, GS1 Databar

MT110L User’s Manual V1.0

Functional after 4KV contact, 8KV air discharge
FCC Part 15B Class B, Part 15C, CE EN55022/24/32, EN301489-1-17, EN300328 V2.1.1 EN/IEC60825-1 (Class 1), FDA, EN/IEC60950-1 WEEE, RoHS 2.0, PAHs
ISO 22196 (JIS Z 2801), ISO 11737-1/2

Beeper Indication

Beeper Single beep Single short beep Two beeps Three beeps
Three short beeps
Four beeps (Hi-Lo-Hi-Lo) Five beeps

Status
Good read The scanner reads a Code39 ASCII during multi-step configuration Wireless connection The scanner successfully reads a configuration barcode Wireless disconnection The scanner reads a barcode while disconnected The scanner reads an unexpected barcode during multi-step configuration. (Please scan “Abort” and start over) Memory Full Out of range / Poor connection Low power

LED Indication
LED Off Flashing green One green flash Flashing red Solid red

MT110L User’s Manual V1.0
Status Power off / Standby / Connected Disconnected / Discoverable Good read Low power Charging

Chapter 2 General Settings

MT110L User’s Manual V1.0

Barcode Configurability
Scanning below configuration barcodes will allow/prohibit user to change settings by scanning configuration barcodes in this manual.

Enable Barcode Configurability*

Disable Barcode Configurability

Factory Default
Scanning below configuration barcode will reset all parameters to factory default settings (the ones
with * asterisk mark)

Factory Default
Check Version
To check firmware version, please scan below configuration barcode.

Check Version

Laser Brightness

MT110L User’s Manual V1.0

Scan below barcodes to determine Laser brightness according to your preference; either of the settings does not affect the scanner’s Laser safety standard (Class 1), which is non-hazardous to human eyes.

Dim*

Bright

Illumination
Scan below barcodes to determine illumination behavior according to your preference:

Laser Always On LED Auto-Adaptive

Laser Always On LED Off

Laser Off LED Always On

Laser Always On LED Always On *

Good Read Indicator
Beep Tone
Off

MT110L User’s Manual V1.0
Beep Low (2.0KHz)

Beep Medium (2.7KHz)
Beep Mode
Normal*

Beep High (4.0KHz)* Warning Beep Only

Vibrator

Mute

Off*

Data Format
HT/CR/ESC Converts to TAB/ENTER/ESCAPE

MT110L User’s Manual V1.0

Off*

Note: 1. By default, HT [$I], CR [$M] and ESC [%A] is transmitted as <0x09>,

<0x0D> and <0x1B> respectively. 2. When enabled, HT [$I], CR [$M] and ESC [%A] is transmitted as , and on keyboard respectively.

Function Code Conversion

Off

On*

Note: Once disabled, the scanner will output the original encoded data of the barcodes in Appendix Function/Navigation/Modifier Keys.

Numeric Key

MT110L User’s Manual V1.0

Numeric Key

Alphanumeric Key*

Note: 1. By default, the alphanumeric key is used for trasmitting digits. Scan NUMERIC KEY if you want to use the keys on the numeric keypad. 2. If you select NUMERIC KEY, the Num Lock status of the physical keyboard should be ON.

Capslock Mode

Capslock Off*

Capslock On

Capslock Free
Note: When barcode scanner is set to Capslock Free mode, no matter keyboard Capslock LED indicator is ON or OFF, output will be always the same as the Original barcode. In other words, what you see is what output is.

Keyboard Layout
English (US)* Danish
Hungarian (QWERTZ) Canadian French Italian German

MT110L User’s Manual V1.0
English (UK) Spanish
Hungarian (QWERTY) Dutch French
Swiss German

Swiss French Czech (QWERTZ)
Norwegian Portuguese Brazilian (QWERTY) Japanese

MT110L User’s Manual V1.0
Swedish Czech (QWERTY)
Belgian Slovak Canadian (Traditional)
Alt Code

Intercharacter Delay

MT110L User’s Manual V1.0

The configurable range is from 0 to 255ms. The larger the number, the longer the delay.

Set Intercharacter Delay (Default = 4ms)
Example: Set Intercharacter Delay to 8ms Step1: Scan Set Intercharacter Delay Step2: Scan “0” “0” “8” in Appendix – Numbers Step3: Scan Set Intercharacter Delay
Interblock Delay
The configurable range is from 0 to 2550ms. The larger the number, the longer the delay.

Set Interblock Delay (Default = 0ms)
Example: Set Interblock Delay to 20ms Step1: Scan Set Interblock Delay Step2: Scan “0” “0” “2” in Appendix – Numbers Step3: Scan Set Interblock Delay

BCC (Binary Check Character)

MT110L User’s Manual V1.0

Off*

Note: Once enabled, a checksum will be added to the end of each data to conduct Xor calculation. For Bluetooth SPP & USB VCP, the BCC is 1 byte. For Bluetooth HID & USB HID, the BCC are 2 bytes.

Example: The barcode data is “TEST” with terminator 1. BT SPP & USB VCP: Data Format = + + + + + + . BCC = 54h ^ 45h ^ 53h ^ 54h ^ 0Dh ^ 0Ah = 11h 2. BT HID & USB HID: Data Format = + + + + + BCC = 54h ^ 45h ^ 53h ^ 54h ^ E7h = F1h However, since control character cannot be displayed in Bluetooth HID, BCC will be converted into 2 bytes of characters. As a result, the data will be: TEST + + F + 1

Imaging Settings
Inverse Barcode

Disable Inverse Barcode*

Enable Inverse Barcode

19

Chapter 3 Interface

MT110L User’s Manual V1.0

BT HID
Getting Connected
1. Press the function button on the top to power up the scanner. 2. Scan “Disconnect”, the scanner will emit two beeps. Alternatively, press and hold the function
button for 5 seconds until the scanner emits two beeps

Disconnect 3. Scan “BT HID”, the scanner will emit two beeps.

BT HID
4. Select “Wireless Scanner” from discovered device list. 5. If Bluetooth application prompts you to enter a pincode, please follow the steps in Pincode
Setup section. 6. The scanner will emit two beeps as indication that the Bluetooth connection has established
successfully. 7. While conneted with the scanner as physical keyboard, the touch keyboard on iOS/Android
device might disappear. To resolve this issue please do the following: (1) For iOS device, simply press the function button on the top once. (2) For Android device, go to “Settings” > “Language & Input”, tap on “Default keyboard” and
turn off “Physical keyboard” or turn on “On-screen keyboard”.

20

Pincode Setup

MT110L User’s Manual V1.0

If Bluetooth application prompts you to enter a pincode, please follow the steps: 1. Scan “Pincode Start”

Pincode Start 2. Scan numeric barcodes below according to the pincode generated by the Bluetooth application.

0

1

2

3

4

5

6

7

8 3. Scan “Enter”

9
Enter
21

4. Scan “Pincode Stop”

MT110L User’s Manual V1.0

Pincode Stop
BT SPP
Getting Connected
1. Press the function button on the top to power up the scanner. 2. Scan “Disconnect”, the scanner will emit two beeps. Alternatively, press and hold the function
button for 5 seconds until the scanner emits two beeps

Disconnect
3. Scan “BT SPP Master”(recommeded) or “BT SPP Slave”, the scanner will emit two beeps. If host can’t auto-reconnect, use BT SPP Master. If host can auto- reconnect, use BT SPP Slave to avoid conflict.

BT SPP Master (Auto-reconnect)

BT SPP Slave (No Auto-reconnect)

4. Select “Wireless Scanner” from discovered device list. 5. If Bluetooth application prompts you to enter a pincode, enter “1234” from the host. 6. Enter serial communication software on your host and open the port occupied by the scanner. 7. The scanner will emit two beeps as indication that the Bluetooth connection has established
successfully.

22

Set SPP Pincode

MT110L User’s Manual V1.0

By default, the pincode under BT SPP profile for the scanner is “1234”. It is configurable up to 8 numbers.

Set SPP Pincode
Example: Set SPP Pincode to 0000. Step1: Scan “Set SPP Pincode” Step2: Scan “0” “0” “0” “0” in Appendix – Numbers Step3: Scan “Set SPP Pincode”

23

General Bluetooth Settings

MT110L User’s Manual V1.0

Power Off Timeout
The power off timeout is 3 minutes & 0 second by default. They are configurable from a minimum of 10 seconds (00:10) to a maximum of 60 minutes and 59 seconds (60:59)

Set Minute (Default = 03)

Set Second (Default = 00)

Example: Set Power Off Timeout to 5 minnutes and 30 seconds. Step1: Scan “Set Minute” Step2: Scan “0” “5” in Appendix – Numbers Step3: Scan “Set Minute” Step4: Scan “Set Second” Step5: Scan “3” “0” in Appendix – Numbers Step6: Scan “Set Second”

To disable Power Off Timeout (make scanner always on), scan below barcode:

Disable Timeout
Shut Down
To shut down the scanner immediately, pelase scan below configuration barcode.
Shut Down
24

iOS Touch Keyboard
To toggle iOS touch keyboard, please scan below configuration barcode.

MT110L User’s Manual V1.0

Toggle iOS Touch Keyboard Alternatively, you may simply press the function button.
Secure Simple Pairing (SSP)
Secure Simple Pairing (SSP), enabled by default, allows the scanner to establish connection with host device without entering pincode. When SSP is disabled, a pincode will be requested by the host device, which by default is “1234” for BT SPP profile and a random number generated by the host device for BT HID profile.

Enable SSP*

Disable SSP

Batch Mode
In Batch Mode, data will be temporarily stored in memory buffer (2KB RAM) when the scanner is out of range or in poor connection quality. Once the scanner gets back in range, the stored data will be sent back to the host immediately, which will also be erased from memory buffer at the same time. Please note that Batch Mode only works with BT HID / BT SPP.

Enable Batch Mode

Disable Batch Mode*
25

Set Bluetooth Device ID
Bluetooth device name is configurable up to 16 alphanumeric characters:

MT110L User’s Manual V1.0

Set Bluetooth Device ID
Example: Set XYZ123 as Bluetooth Device ID Step 1: Scan “Set Bluetooth Device ID” Step 2: Scan “X” “Y” “Z” “1” “2” “3” in Appendix – Upper Case Alphabets & Numbers Step 3: Scan “Set Bluetooth Device ID”
To reset Bluetooth Device ID to “Wireless Scanner”, scan below barcode:

Reset Bluetooth Device ID To add the last 6 digits of MAC address to Bluetooth Device ID (“Wireless-xxxxxx”), scan below barcode:
Add MAC Address to Bluetooth Device ID
Check Bluetooth Firmware Version
To check scanner’s Bluetooth firmware version, please connect to a host device via BT HID or BT SPP and scan below configuration barcode.
Check Bluetooth Firmware Version
26

Check Device MAC Address

MT110L User’s Manual V1.0

To check scanner’s MAC address, please connect to a host device via BT HID or BT SPP and scan below configuration barcode.

Check Device MAC Address
Check Host MAC Address
To check scanner’s MAC address, please connect to a host device and scan below configuration barcode.

Check Host MAC Address
Check Battery Life
To check scanner’s battery life, please connect to a host device and scan below configuration barcode.

Check Battery Life

27

ScanLink

MT110L User’s Manual V1.0

ScanLink is a connection method that turns the scanner into a master device, which initiates the Bluetooth connection with the target host device (now a slave device). This, as a result, saves user the trouble of going through numerous setup procedures on the host device to establish connection.

Simply generate ScanLink barcode for the target slave device in below rule:

For BT HID profile, please encode: HID in Code39 without checksum.

For BT SPP profile, please encode: SPP in Code39 without checksum.

Example: Target Slave Device MAC Address = 00:15:83:52:2C:3B, Profile = BT HID Encode HID001583522C3B in Code39 without checksum.

28

Memory Mode

MT110L User’s Manual V1.0

Memory Mode After scanning the above barcode, the scanner will be able to collect barcode data off-line. The barcode data will be stored in the format of:
, , To retrieve stored data, please connect the scanner to the host with USB cable, access removable storage device “MiniScan” from which you may open or copy the file “BARCODE.txt” to your computer. To exit Memory Mode, simply scan any interface barcode (e.g. “BT HID”, “BT SPP Master/Slave”, “USB HID”, “USB VCP”) other than memory mode. Delete Last Record To delete last memory data, please scan below barcode or press function button once when the scanner is in memory mode. Delete Last Record Clear All Record To delete all memory data, please connect the scanner to the host with USB cable, access removable storage device “MiniScan”, and delete the file “BARCODE.txt”. The scanner will emit two beeps as indication that the file has been successfully deleted. 29
Data Format

MT110L User’s Manual V1.0

The default Data Format in memory mode is , , .

Data Format

Below are configurable items and their setup codes:

Code

Item

2

Date

3

Time

4

Barcode Data

Example: Set Data Format as , , Step1: Scan “Data Format” Step2: Scan “4” “3” “2” respectively in Appendix – Numbers Step3: Scan “Data Format”

Field Separator
The field separator in memory mode is comma ( , ) by default. It can be replaced by any alphanumeric characters.

Field Separator
Example: Set Field Separator as Semicolon ( ; ) Step1: Scan “Field Separator” Step2: Scan ” ; ” in Appendix – Symbols Step3: Scan “Field Separator”

30

Date Format
The default Date Format is DD/MM/YYYY (Code = 09)

MT110L User’s Manual V1.0

Date Format

Below are available Date Format and their setup codes:

Code Date Format

Code Date Format

01 DD-MM-YYYY

09 DD/MM/YYYY

02 MM-DD-YYYY

10 MM/DD/YYYY

03 DD-MM-YY

11 DD/MM/YY

04 MM-DD-YY

12 MM/DD/YY

05 YYYY-MM-DD

13 YYYY/MM/DD

06 YY-MM-DD

14 YY/MM/DD

07 DD-MM

15 DD/MM

08 MM-DD

16 MM/DD

Example: Set Date Format as MM/DD/YY (Code = 12) Step1: Scan “Date Format” Step2: Scan “1” “2” respectively in Appendix – Numbers Step3: Scan “Date Format”

Time Format
The default Time Format is HH:MM:SS (Code = 01)

Time Format

Below are available Time Format and their setup codes:

Code

Time Format

01

HH:MM:SS

02

HH:MM

31

Example: Set Time Format as HH:MM (Code = 02) Step1: Scan “Time Format” Step2: Scan “0” “2” respectively in Appendix Numbers Step3: Scan “Time Format”
Date & Time Setup

MT110L User’s Manual V1.0

Set Date

Set Time

Example: Set date as 2022-09-27, set time as 08:10:30 am (HH:MM:SS) Step1: Scan “Set Date” Step2: Scan “2” “2” “0” “9” “2” “7” in Appendix – Numbers Step3: Scan “Set Date” Step4: Scan “Set Time” Step5: Scan “0” “8” “1” “0” “3” “0” in Appendix – Numbers Step6: Scan “Set Time”

32

USB HID

MT110L User’s Manual V1.0

Scanning below configuration barcode will configure the scanner to USB HID interface, in which the scanner becomes an HID keyboard device.

USB HID
USB VCP
Scanning below configuration barcode will configure the scanner to USB VCP interface. The scanner will be able communicate with the host via USB Virtual COM. Normally virtual COM port can be recognized by the host. If it is not recognizable by the host, please download VCP driver from our website.
USB VCP

33

Chapter 4 Reading Mode

MT110L User’s Manual V1.0

Trigger Mode
In Trigger Mode the LED will stay on when the trigger is pressed and held, and will turn off automatically once a barcode is read or LED Auto-Off timeout expires if LED Auto-Off Control is enabled.

Trigger Mode*
Toggle Mode
In Toggle Mode the LED will stay on when the trigger is pressed once, and will not turn off until a barcode is read or LED Auto-Off timeout expires if LED Auto-Off Control is enabled.

Toggle Mode
Flash Mode
In Flash Mode the LED will stay on after a barcode is detected, and will start flashing if no barcode is detected after LED Auto-Off timeout expires. The trigger is unfunctional unless Trigger Control is enabled.

Flash Mode
34

MT110L User’s Manual V1.0
Continuous Mode
In Continuous Mode the LED is always on, with barcodes being read continuously. The trigger is unfunctional unless Trigger Control is enabled.

Continuous Mode
Continuous Auto Off Mode
In Continuous Auto Off Mode the LED will stay on when the trigger is pressed once, and will automatically turn off if no barcode is detected after LED Auto-Off timeout expires.

Continuous Auto Off Mode
Flash / Continuous Mode Trigger Control
When enabled, the LED can be turned on/off by pressing trigger.

Trigger Control On
35

Trigger Control Off*

Trigger / Toggle Mode LED Auto-Off Control

MT110L User’s Manual V1.0

When enabled, the LED will automatically turn off after LED Auto-Off Timeout expires.

LED Auto-Off Control On

LED Auto-Off Control Off*

Trigger / Toggle / Flash / Continuous Auto Off Mode LED Auto-Off Timeout
LED Auto-Off Timeout is the maximum scanning duration. When LED Auto-Off Timeout expires, the scanning operation stops automatically. The configurable range is 0.1 ~ 125 sec. 3 digits must be programmed during the multi-step configuration. (001 = 0.1 sec, 002 = 0.2 sec, 003 = 0.3 sec, 004 = 0.4 sec, 005 = 0.5 sec, 0.6 = 1 sec, 007 = 1.5 sec, 008 = 2.0 sec, 009 = 2.5 sec, 010 = 3 sec, …… 254 = 125 sec, 255 = unlimited)

LED Auto-Off Timoeut (Default = 60 sec)
Example: Set LED Auto-Off Timeout as 5 sec Step1: Scan “LED Auto-Off Timeout” Step2: Scan “0” “1” “4” in Appendix – Numbers Step3: Scan “LED Auto-Off Timeout”

36

MT110L User’s Manual V1.0
Flash / Continuous / Continuous Auto Off Mode Identical Read Interval
A barcode (or an identical one) can be re-scanned only after the defined amount of Identical Read Interval expires. The configurable range is 0.1 ~ 125 sec. 3 digits must be programmed during the multi-step configuration. (001 = 0.1 sec, 002 = 0.2 sec, 003 = 0.3 sec, 004 = 0.4 sec, 005 = 0.5 sec, 0.6 = 1 sec, 007 = 1.5 sec, 008 = 2.0 sec, 009 = 2.5 sec, 010 = 3 sec, …… 254 = 125 sec, 255 = unlimited)
Identical Read Interval (Default = 1 sec)
Example: Set Identical Read Interval as 5 sec Step1: Scan “Identical Read Interval” Step2: Scan “0” “1” “4” in Appendix – Numbers Step3: Scan “Identical Read Interval”
Accuracy Adjustment
Accuracy Adjustment assures a more reliable decoded output. The higher the number, the greater the accuracy, yet with slower speed. The configurable range is 0 ~ 9. 1 digit must be programmed during the multi-step configuration.
Accuracy Adjustment (Default = 0)
Example: Set Accuracy Adjustment as 2 Step1: Scan “Accuracy Adjustment” Step2: Scan “2” in Appendix – Numbers Step3: Scan “Accuracy Adjustment”
37

Chapter 5 Data Format

MT110L User’s Manual V1.0

By default data format is as follows:
Code ID When Factory ID or AIM ID is enabled, a Factory ID or AIM ID (see Appendix Factory ID and AIM ID Table) will be added to the beginning of each barcode data. When Set ID is enabled, a user-defined ID (see Set ID) will be added to the beginning of each barcode data. Disable Code ID* Enable Factory ID Enable AIM ID Set ID Set ID can be 0 ~ 2 alphanumerics for each symbology. Enable Set ID Set ID Code39 Set ID Codabar 38 Set ID Code128 MT110L User’s Manual V1.0 Set ID EAN-13 Set ID EAN-8 Set ID UPC-A Set ID UPC-E Set ID Interleaved 2 of 5 Set ID Matrix 2 of 5 Set ID Industrial 2 of 5 Set ID Code93 Set ID Code11 Set ID MSI Plessey Set ID GS1 Databar Set ID GS1 Databar Limited Set ID GS1 Databar Expanded 39 Set ID China Postal Code Set ID Telepen MT110L User’s Manual V1.0 Set ID IATA Set ID UK Plessey Set ID IATA Set ID GS1-128 Set ID Code32 Example: Set Code39 Set ID as XY Step1: Scan “Set ID Code39” Step2: Scan “X” “Y” in Appendix – Upper Case Alphabets Step3: Scan “Set ID Code39” Set ID IATA Data Length Send Data Length Off* Send Data Length On 40 Preamble Preamble can be up to 16 bytes of data. MT110L User’s Manual V1.0 Set Preamble Example: Set Preamble as XYZ123 Step 1: Scan “Set Preamble” Step 2: Scan “X” “Y” “Z” “1” “2” “3” in Appendix – Upper Case Alphabets & Numbers Step 3: Scan “Set Preamble” Postamble Postamble can be up to 16 bytes of data. Set Postamble Example: Set Postamble as XYZ123 Step 1: Scan “Set Postamble” Step 2: Scan “X” “Y” “Z” “1” “2” “3” in Appendix – Upper Case Alphabets & Numbers Step 3: Scan “Set Postamble” Clear Preamble/Postamble Clear Preamble/Postamble 41 Terminator MT110L User’s Manual V1.0 None * Note: 1. Default Terminator for BT HID or USB HID interface = (or Enter) 2. Default Terminator for BT SPP or USB VCP interface = 3\. or is treated as Enter for BT HID or USB HID interface. 42 Chapter 6 Symbologies General Settings MT110L User’s Manual V1.0 Enable All Symbologies Disable All Symbologies Note: When all symbologies are disabled, configuration barcodes are still readable. UPC-A Enable/Disable UPC-A Enable UPC-A* Lead Digit Disable UPC-A Not Send Lead Digit Send Lead Digit* 43 Check Digit MT110L User’s Manual V1.0 Send Check Digit* UPC-A Expand to EAN-13 Not Send Check Digit Enable UPC-A Expand to EAN-13 Add On Supplement Disable UPC-A Expand to EAN-13* Enable 5-digit Supplement Disable 5-digit Supplement* Enable 2-digit Supplement Disable 2-digit Supplement* Enable Add A Space Disable Add A Space* 44 MT110L User’s Manual V1.0 Enable Addenda Required* Disable Addenda Required Note: When Addenda Required is enabled, the scanner will only read an UPC-A barcode that has 2-digit or 5-digit addenda/supplement. UPC-E Enable/Disable UPC-E Enable UPC-E* UPC-E System Number UPC-E0 Off & UPC-E1 Off Disable UPC-E UPC-E0 On Only* UPC-E1 On Only UPC-E0 On & UPC-E1 On 45 Lead Digit MT110L User’s Manual V1.0 Not Send Lead Digit Check Digit Send Lead Digit* Send Check Digit* UPC-E Expand to UPC-A Not Send Check Digit Enable UPC-E Expand to UPC-A Add On Supplement Disable UPC-E Expand to UPC-A* Enable 5-digit Supplement Disable 5-digit Supplement* 46 Enable 2-digit Supplement MT110L User’s Manual V1.0 Disable 2-digit Supplement* Enable Add A Space Disable Add A Space* Enable Addenda Required* Disable Addenda Required Note: When Addenda Required is enabled, the scanner will only read an UPC-E barcode that has 2-digit or 5-digit addenda/supplement. 47 EAN-8 Enable/Disable EAN-8 MT110L User’s Manual V1.0 Enable EAN-8* Lead Digit Disable EAN-8 Not Send Lead Digit Check Digit Send Lead Digit* Not Send Check Digit EAN-8 Expand to EAN-13 (Zero Extension) Send Check Digit* Enable EAN-8 Expand to EAN-13 Disable EAN-8 Expand to EAN-13* 48 Add On Supplement Enable 5-digit Supplement MT110L User’s Manual V1.0 Disable 5-digit Supplement* Enable 2-digit Supplement Disable 2-digit Supplement* Enable Add A Space Disable Add A Space* Enable Addenda Required* Disable Addenda Required Note: When Addenda Required is enabled, the scanner will only read an EAN-8 barcode that has 2-digit or 5-digit addenda/supplement. 49 EAN-13 Enable/Disable EAN-13 MT110L User’s Manual V1.0 Enable EAN-13* Lead Digit Disable EAN-13 Not Send Lead Digit Check Digit Send Lead Digit* Not Send Check Digit Add On Supplement Send Check Digit* Enable 5-digit Supplement Disable 5-digit Supplement* 50 Enable 2-digit Supplement MT110L User’s Manual V1.0 Disable 2-digit Supplement* Enable Add A Space Disable Add A Space* Enable Addenda Required* Disable Addenda Required Note: When Addenda Required is enabled, the scanner will only read an EAN-13 barcode that has 2-digit or 5-digit addenda/supplement. ISBN On Off* Enable ISBN-10 Expand to ISBN-13 Disable ISBN-10 Expand to ISBN-13* 51 ISSN MT110L User’s Manual V1.0 On Off* ISMN On Off* Note: ISBN / ISSN / ISMN will be considered as an extension of EAN-13. If ISBN / ISSN / ISMN needs to be read, EAN-13 must be enabled. If ISBN / ISSN / ISMN need to be read with addenda, EAN-13 must be enabled with Addenda Required and 2-digit or 5-digit supplement enabled as well. 52 Code 128 Enable/Disable Code 128 MT110L User’s Manual V1.0 Enable Code 128* Code 128 Min/Max Length Disable Code 128 Set Min Length (Default = 05) Set Max Length (Default = 48) Example: Set Min Length as 8, Max Length as 12 for Code128 Step1: Scan “Set Min Length” Step2: Scan “0” “8” in Appendix – Numbers Step3: Scan “Set Min Length” Step4: Scan “Set Max Length” Step5: Scan “1” “2” in Appendix – Numbers Step6: Scan “Set Max Length” Note: Configurable range for Min/Max Length is 01 ~ 99. 53 GS1-128(UCC/EAN 128) Enable/Disable GS1-128 Enable GS1-128* GS1-128 AIM ID Enable AIM ID FUNC 1 Character Send FUNC1 Character MT110L User’s Manual V1.0 Disable GS1-128 Disable AIM ID Not Send FUNC1 Character Define FUNC1 Character Note: 1. The first FUNC1 Character is transformed into ]c1, and the next FUNC1 Character(s) is transformed into by default, which can be user-defiend. 2. Data format is as follows: < ]c1 > 54 3. To define the second FUNC1 Character, please refer below: Example: Set FUNC1 Character as “X” Step1: Scan “Define FUNC1 Character” Step2: Scan “X” in Appendix – Upper Case Alphabets Step3: Scan “Define FUNC1 Character” GS1-128 Min/Max Length MT110L User’s Manual V1.0 Set Min Length (Default = 05) Set Max Length (Default = 48) Example: Set Min Length as 8, Max Length as 12 for GS1-128 Step1: Scan “Set Min Length” Step2: Scan “0” “8” in Appendix – Numbers Step3: Scan “Set Min Length” Step4: Scan “Set Max Length” Step5: Scan “1” “2” in Appendix – Numbers Step6: Scan “Set Max Length” Note: Configurable range for Min/Max Length is 01 ~ 99. 55 Code 39 Enable/Disable Code 39 Enable Code 39 Verification Disable CDV CDV & Send CD Start/Stop Not Send Start/Stop* MT110L User’s Manual V1.0 Disable Code 39 CDV & Not Send CD Send Start/Stop 56 Full ASCII Code39 MT110L User’s Manual V1.0 Enable Full ASCII Code39* Code39 Min/Max Length Disable Full ASCII Code39 Set Min Length (Default = 01) Set Max Length (Default = 48) Example: Set Min Length as 8, Max Length as 12 for Code39 Step1: Scan “Set Min Length” Step2: Scan “0” “8” in Appendix – Numbers Step3: Scan “Set Min Length” Step4: Scan “Set Max Length” Step5: Scan “1” “2” in Appendix – Numbers Step6: Scan “Set Max Length” Note: Configurable range for Min/Max Length is 01 ~ 99. 57 Code 32 Enable/Disable Code 32 Enable Code 32 Leading/Tailing Not Send Leading & Tailing Send Tailing Only MT110L User’s Manual V1.0 Disable Code 32 Send Leading Only Send Leading & Tailing 58 Code 93 Enable/Disable Code 93 MT110L User’s Manual V1.0 Enable Code 93 Code 93 Min/Max Length Disable Code 93* Set Min Length (Default = 06) Set Max Length (Default = 48) Example: Set Min Length as 8, Max Length as 12 for Code93 Step1: Scan “Set Min Length” Step2: Scan “0” “8” in Appendix – Numbers Step3: Scan “Set Min Length” Step4: Scan “Set Max Length” Step5: Scan “1” “2” in Appendix – Numbers Step6: Scan “Set Max Length” Note: Configurable range for Min/Max Length is 01 ~ 99. 59 Code 11 Enable/Disable Code 11 Enable Code 11 Verification Disable CDV CDV & Send CD Check Digit 1 Digit MT110L User’s Manual V1.0 Disable Code 11* CDV & Not Send CD 2 Digits 60 Code 11 Min/Max Length MT110L User’s Manual V1.0 Set Min Length (Default = 06) Set Max Length (Default = 32) Example: Set Min Length as 8, Max Length as 12 for Code11 Step1: Scan “Set Min Length” Step2: Scan “0” “8” in Appendix – Numbers Step3: Scan “Set Min Length” Step4: Scan “Set Max Length” Step5: Scan “1” “2” in Appendix – Numbers Step6: Scan “Set Max Length” Note: Configurable range for Min/Max Length is 01 ~ 99. 61 Codabar (NW-7) Enable/Disable Codabar Enable Codabar* Start/Stop Send Start/Stop MT110L User’s Manual V1.0 Disable Codabar Not Send Start/Stop* ST/SP: ABCD/ABCD* ST/SP: abcd/abcd ST/SP: ABCD/TN*E Example of ST(Start) / SP(Stop): 123456 Not Send Start/Stop A123456B ST/SP: ABCD/ABCD a123456b ST/SP: abcd/acbd A123456N ST/SP: ABCD/TN*E a123456n ST/SP: abcd/tn*e 62 ST/SP: abcd/tn*e Verification Disable CDV* MT110L User’s Manual V1.0 CDV & Send CD Codabar Min/Max Length CDV & Not Send CD Set Min Length (Default = 06) Set Max Length (Default = 48) Example: Set Min Length as 8, Max Length as 12 for Codabar Step1: Scan “Set Min Length” Step2: Scan “0” “8” in Appendix – Numbers Step3: Scan “Set Min Length” Step4: Scan “Set Max Length” Step5: Scan “1” “2” in Appendix – Numbers Step6: Scan “Set Max Length” Note: Configurable range for Min/Max Length is 01 ~ 99. 63 CLSI Format MT110L User’s Manual V1.0 CLSI Format On CLSI Format Off* Note: CLSI Enable library space insertion. If you enable CLSI format, this option inserts spaces in position 2, 7, 13 of the data string for use in library systems. ABC-Codabar On Off* Insert Data – On Insert Data – Off* Set Insert Data Note: 1. ABC-Codabar (American Blood Commission). The ABC Code is an acronym for American Blood Commission. This barcode is a variant of Codabar developed for the use in the blood bank. This barcode consists of two barcodes which are decoded in one read cycle. This barcode is concatenated when the stop character of the first barcode and the start character of the secnd barcode are both “D”. Those two D’s are not transmitted. 2. Insert Data can be 1 alphanumeric. 64 Example: Set Insert Data as “X” Step1: Scan “Set Insert Data” Step2: Scan “X” in Appendix – Upper Case Alphabets Step3: Scan “Set Insert Data” CX-Codabar On MT110L User’s Manual V1.0 Off* Insert Data – On Insert Data – Off* Set Insert Data Note: 1. CX-Codabar consists of two barcodes which are decoded in one read cycle. The barcode is concatenated when the stop character of the first barcode is a C and the start character of the second barcode is a B. These two characters are not transmitted. 2. Please make sure Codabar Coupling is disabled before enabling CX-Codabar. Example: Set Insert Data as “X” Step1: Scan “Set Insert Data” Step2: Scan “X” in Appendix – Upper Case Alphabets Step3: Scan “Set Insert Data” 65 Codabar Coupling On MT110L User’s Manual V1.0 Off* Insert Data – On Insert Data – Off* Set Insert Data Note: ABC-Codabar and CX-Codabar have certain rules regarding the Stop Character of first barcode and the Start Character of second barcode while in conjunction, with Codabar Coupling enabled, the data from any two Codabar barcodes can be coupled into one set of data without any limitations between the Stop Character of the first barcode and the Start Character of second barcode. The Start and Stop characters associated with each barcode will be sent. Example: Set Insert Data as “X” Step1: Scan “Set Insert Data” Step2: Scan “X” in Appendix – Upper Case Alphabets Step3: Scan “Set Insert Data” 66 Interleaved 2 of 5 Enable/Disable Interleaved 2 of 5 Enable Interleaved 2 of 5 Verification Disable CDV MT110L User’s Manual V1.0 Disable Interleaved 2 of 5 CDV & Send CD First / Last Digit Suppressed No Suppressed* CDV & Not Send CD First Digit Suppressed Last Digit Suppressed 67 Interleaved 2 of 5 Min/Max Length MT110L User’s Manual V1.0 Set Min Length (Default = 06) Set Max Length (Default = 48) Example: Set Min Length as 8, Max Length as 12 for Interleaved 2 of 5 Step1: Scan “Set Min Length” Step2: Scan “0” “8” in Appendix – Numbers Step3: Scan “Set Min Length” Step4: Scan “Set Max Length” Step5: Scan “1” “2” in Appendix – Numbers Step6: Scan “Set Max Length” Note: Configurable range for Min/Max Length is 01 ~ 99. 68 IATA (Standard 2 of 5) Enable/Disable IATA Enable IATA Verification Disable CDV* MT110L User’s Manual V1.0 Disable IATA* CDV & Send CD IATA Min/Max Length CDV & Not Send CD Set Min Length (Default = 06) Set Max Length (Default = 48) Example: Set Min Length as 8, Max Length as 12 for IATA Step1: Scan “Set Min Length” Step2: Scan “0” “8” in Appendix – Numbers Step3: Scan “Set Min Length” Step4: Scan “Set Max Length” 69 Step5: Scan “1” “2” in Appendix – Numbers Step6: Scan “Set Max Length” Note: Configurable range for Min/Max Length is 01 ~ 99. Matrix 2 of 5 Enable/Disable Matrix 2 of 5 MT110L User’s Manual V1.0 Enable Matrix 2 of 5 Verification Disable CDV* CDV & Send CD Disable Matrix 2 of 5* CDV & Not Send CD 70 Matrix 2 of 5 Min/Max Length MT110L User’s Manual V1.0 Set Min Length (Default = 06) Set Max Length (Default = 48) Example: Set Min Length as 8, Max Length as 12 for Matrix 2 of 5 Step1: Scan “Set Min Length” Step2: Scan “0” “8” in Appendix – Numbers Step3: Scan “Set Min Length” Step4: Scan “Set Max Length” Step5: Scan “1” “2” in Appendix – Numbers Step6: Scan “Set Max Length” Note: Configurable range for Min/Max Length is 01 ~ 99. 71 Industrial 2 of 5 Enable/Disable Industrial 2 of 5 Enable Industrial 2 of 5 Verification Disable CDV* MT110L User’s Manual V1.0 Disable Industrial 2 of 5* CDV & Send CD Industrial 2 of 5 Min/Max Length CDV & Not Send CD Set Min Length (Default = 06) Set Max Length (Default = 48) Example: Set Min Length as 8, Max Length as 12 for Industrial 2 of 5 Step1: Scan “Set Min Length” Step2: Scan “0” “8” in Appendix – Numbers Step3: Scan “Set Min Length” Step4: Scan “Set Max Length” 72 Step5: Scan “1” “2” in Appendix – Numbers Step6: Scan “Set Max Length” Note: Configurable range for Min/Max Length is 01 ~ 99. MT110L User’s Manual V1.0 73 China Postal Code (Toshiba Code) Enable/Disable China Postal Code MT110L User’s Manual V1.0 Enable China Postal Code Verification Disable China Postal Code* Disable CDV* CDV & Send CD China Postal Code Min/Max Length CDV & Not Send CD Set Min Length (Default = 11) Set Max Length (Default = 48) Example: Set Min Length as 8, Max Length as 12 for China Postal Code Step1: Scan “Set Min Length” Step2: Scan “0” “8” in Appendix – Numbers Step3: Scan “Set Min Length” Step4: Scan “Set Max Length” 74 Step5: Scan “1” “2” in Appendix – Numbers Step6: Scan “Set Max Length” Note: Configurable range for Min/Max Length is 01 ~ 99. MSI Plessey Enable/Disable MSI Plessey MT110L User’s Manual V1.0 Enable MSI Plessey Verification Disable MSI Plessey* CDV & Send CD* Check Digit CDV & Not Send CD Single Check Digit MOD10* Double Check Digits MOD10 Double Check Digits MOD10/MOD11 75 MSI Plessey Min/Max Length MT110L User’s Manual V1.0 Set Min Length (Default = 06) Set Max Length (Default = 48) Example: Set Min Length as 8, Max Length as 12 for MSI Plessey Step1: Scan “Set Min Length” Step2: Scan “0” “8” in Appendix – Numbers Step3: Scan “Set Min Length” Step4: Scan “Set Max Length” Step5: Scan “1” “2” in Appendix – Numbers Step6: Scan “Set Max Length” Note: Configurable range for Min/Max Length is 01 ~ 99. 76 UK Plessey Enable/Disable UK Plessey MT110L User’s Manual V1.0 Enable UK Plessey Verification Disable UK Plessey* CDV & Send CD Telepen Enable/Disable Telepen CDV & Not Send CD* Enable Telepen Output Format Disable Telepen* ASCII* Number 77 GS1 DataBar (RSS-14) Enable/Disable GS1 DataBar MT110L User’s Manual V1.0 Enable GS1 DataBar Disable GS1 DataBar* Enable/Disable GS1 DataBar Stacked / Omnidirectional Enable GS1 DataBar Stacked* Prefix AI Disable GS1 DataBar Stacked Send Prefix AI Check Digit Not Send Prefix AI* Send CD Not Send CD* 78 GS1 DataBar Limited (RSS-Limited) Enable/Disable GS1 DataBar Limited MT110L User’s Manual V1.0 Enable GS1 DataBar Limited Prefix AI Disable GS1 DataBar Limited* Send Prefix AI Check Digit Not Send Prefix AI* Send CD Not Send CD* GS1 DataBar Expanded (RSS-Expanded) Enable/Disable GS1 DataBar Expanded Enable GS1 DataBar Expanded Disable GS1 DataBar Expanded* 79 Enable/Disable GS1 DataBar Expanded Stacked MT110L User’s Manual V1.0 Enable GS1 DataBar Expanded Stacked* Disable GS1 DataBar Expanded Stacked GS1 DataBar Expanded Min/Max Length Set Min Length (Default = 01) Set Max Length (Default = 74) Example: Set Min Length as 8, Max Length as 12 for GS1 DataBar Expanded Step1: Scan “Set Min Length” Step2: Scan “0” “8” in Appendix – Numbers Step3: Scan “Set Min Length” Step4: Scan “Set Max Length” Step5: Scan “1” “2” in Appendix – Numbers Step6: Scan “Set Max Length” Note: Configurable range for Min/Max Length is 01 ~ 99. 80 Chapter 7 Appendix Appendix – Numbers 0 2 4 6 8 MT110L User’s Manual V1.0 1 3 5 7 9 81 Appendix – Upper Case Alphabets A C E G I K M O 82 MT110L User’s Manual V1.0 B D F H J L N P MT110L User’s Manual V1.0 Q R S T U V W X Y Z 83 Appendix – Lower Case Alphabets a c e g i k m o 84 MT110L User’s Manual V1.0 b d f h j l n p MT110L User’s Manual V1.0 q r s t u v w x y z 85 Appendix Control Codes NUL STX EOT ACK BS LF FF SO 86 MT110L User’s Manual V1.0 SOH ETX ENQ BEL HT VT CR SI DLE DC2 DC4 SYN CAN SUB FS RS MT110L User’s Manual V1.0 DC1 DC3 NAK ETB EM ESC GS US 87 Appendix Symbols + . % @ ^ & _ 88 MT110L User’s Manual V1.0 $ / ! # ~ * = MT110L User’s Manual V1.0 | { } [ ] ( ) < ` ” ` , ; : ? 89 MT110L User’s Manual V1.0 SP DEL 90 Appendix Function Keys F1 F3 F5 F7 F9 F11 Home Enter (Numeric Key) 91 MT110L User’s Manual V1.0 F2 F4 F6 F8 F10 F12 End App Appendix Navigation Keys MT110L User’s Manual V1.0 Cursor Left Cursor Up Page Up Tab Esc BS Del Cursor Right Cursor Down Page Down Back Tab Enter Ins 92 Appendix Modifier Keys MT110L User’s Manual V1.0 Alt (Left) make 1 Alt (Right) make Shift (Left) make 2 Shift (Right) make Win (Left) make Win (Right) make Alt (Left) break Alt (Right) break Shift (Left) break Shift (Right) break Win (Left) break Win (Right) break 93 Ctrl (Left) make *3 MT110L User’s Manual V1.0 Ctrl (Left) break Ctrl (Right) make Ctrl (Right) break Note: 1: When “Alt (Left) make” is programmed, please scan “Alt (Left) break” to resume barcode setting. 2: When “Shift (Left) make” is programmed, please scan “Shift (Left) break” to resume barcode setting. *3: When “Ctrl (Left) make” is programmed, please scan “Ctrl (Left) break” to resume barcode setting. Appendix – Abort If there is an error reading data barcode during multi-step configuration, you may cancel configuration by scanning below configuration barcode. Abort 94 Appendix – Default Table MT110L User’s Manual V1.0 Function General Settings Barcode Configurability Laser Brightness Illumination Beep Tone Beep Mode Vibrator Data Format HT/CR/ESC Converts to TAB/ENTER/ESCAPE Function Code Conversion Numeric Key Capslock Mode Keyboard Layout Intercharacter Delay Interblock Delay BCC (Binary Check Character) Image Settings Inverse Barcode Interface Set SPP Pincode General Bluetooth Settings Power Off Timeout Secure Simple Pairing (SSP) Batch Mode Set Bluetooth Device ID Memory Mode Data Format Field Separator Date Format Time Format Date & Time Setup Reading Mode Trigger Mode Toggle Mode Flash Mode Default Remark ON Dim Laser Always On, LED Always On High (4.0KHz) Normal OFF OFF ON OFF OFF English (US) 4ms 0ms OFF OFF 1234 03:00 ON OFF Wireless Scanner ,, , DD/MM/YYYY HH:MM:SS N/A Trigger Mode N/A N/A 95 Continuous Mode Continuous Auto Off Mode Flash / Continuous Mode Trigger Control Trigger / Toggle Mode LED Auto-Off Control Trigger / Toggle / Flash / Continuous Auto Off Mode LED Auto-Off Timeout Flash / Continuous / Continuous Auto Off Mode Identical Read Interval Accuracy Adjustment Data Format Code ID Set ID Data Length Preamble Postamble Terminator Symbologies General Settings UPC-A Enable/Disable Lead Digit Check Digit UPC-A Expand to EAN-13 5-digit Supplement 2-digit Supplement Add A Space Addenda Required UPC-E Enable/Disable System Number Lead Digit Check Digit UPC-E Expand to UPC-A 5-digit Supplement 2-digit Supplement Add A Space N/A N/A OFF OFF 60 sec 1 sec 0 Disable N/A OFF N/A N/A CR (BT HID/USB HID) CR LF (BT SPP/USB VCP) N/A ON Send Send OFF OFF OFF OFF ON ON UPC-E0 Only Send Send OFF OFF OFF OFF 96 MT110L User’s Manual V1.0 Addenda Required EAN-8 Enable/Disable Lead Digit Check Digit EAN-8 Expand to EAN-13 (Zero Extension) 5-digit Supplement 2-digit Supplement Add A Space Addenda Required EAN-13 Enable/Disable Lead Digit Check Digit 5-digit Supplement 2-digit Supplement Add A Space Addenda Required ISBN ISBN-10 Expand to ISBN-13 ISSN ISMN Code 128 Enable/Disable Min Length Max Length GS1-128 Enable/Disable AIM ID FUNC1 Character Define FUNC1 Min Length Max Length Code 39 Enable/Disable Verification Start/Stop Full ASCII Code39 Min Length ON ON Send Send OFF OFF OFF OFF ON ON Send Send OFF OFF OFF ON OFF OFF OFF OFF ON 05 48 ON OFF Not Send 05 48 ON Disable CDV Not Send ON 01 97 MT110L User’s Manual V1.0 Max Length Code 32 Enable/Disable Leading/Tailing Code 93 Enable/Disable Min Length Max Length Code 11 Enable/Disable Verification Check Digit Min Length Max Length Codabar Enable/Disable Start/Stop ST/SP Verification Min Length Max Length CLSI Format ABC-Codabar Insert Data On/Off Insert Data CX-Codabar Insert Data On/Off Insert Data Codabar Coupling Insert Data On/Off Insert Data Interleaved 2 of 5 Enable/Disable Verification First/Last Digit Suppressed Min Length Max Length IATA (Standard 2 of 5) Enable/Disable Verification 48 OFF Send Leading & Tailing OFF 06 48 OFF Disable CDV 1 Digit 06 32 ON Not Send ABCD/ABCD Disable CDV 06 48 OFF OFF OFF N/A OFF OFF N/A OFF OFF N/A ON Disable CDV No Suppressed 06 48 OFF Disable CDV 98 MT110L User’s Manual V1.0 Min Length Max Length Matrix 2 of 5 Enable/Disable Verification Min Length Max Length Industrial 2 of 5 Enable/Disable Verification Min Length Max Length China Postal Code (Toshiba Code) Enable/Disable Verification Min Length Max Length MSI Plessey Enable/Disable Verification Check Digit Min Length Max Length UK Plessey Enable/Disable Verification Telepen Enable/Disable Output Format GS1 DataBar (RSS-14) Enable/Disable GS1 DataBar Enable/Disable GS1 DataBar Stacked / Omnidirectional Prefix AI Check Digit GS1 DataBar Limited (RSS-Limited) Enable/Disable Prefix AI Check Digit GS1 DataBar Expanded 06 48 OFF Disable CDV 06 48 OFF Disable CDV 06 48 OFF Disable CDV 11 48 OFF CDV & Send CD Single Check Digit MOD10 06 48 OFF CDV & Not Send CD OFF ASCII OFF ON Not Send Not Send CD OFF Not Send Not Send CD 99 MT110L User’s Manual V1.0 (RSS-Expanded) Enable/Disable GS1 DataBar Expanded Enable/Disable GS1 DataBar Expanded Stacked Min Length Max Length OFF ON 01 74 MT110L User’s Manual V1.0 100 Appendix – Factory ID and AIM ID Table Symbology MSI Plessey MSI Plessey (MOD10 / Not Send CD) EAN-8 (2-digit/5-digit Supplement Off) EAN-8 (2-digit Supplement On) EAN-8 (5-digit Supplement On) Factory ID O S UPC-E (2-digit/5-digit Supplement Off) UPC-E (2-digit Supplement On) E UPC-E (5-digit Supplement On) UPC-A (2-digit/5-digit Supplement Off) UPC-A (2-digit Supplement On) A UPC-A (5-digit Supplement On) EAN-13 (2-digit/5-digit Supplement Off) EAN-13 (2-digit Supplement On) EAN-13 (5-digit Supplement On) Code 93 Code 11 (Disable CDV) Code 11 (Send 1-Digit CD) Code 11 (Send 2-Digit CD) Code 11 (Not Send CD) Telepen (ASCII) Telepen (Number) GS1-128 (UCC/EAN 128) F L J U T 101 MT110L User’s Manual V1.0 AIM ID ]M0 ]M1 ]E4 ]E0 ]E3 ]E0 ]E3 ]E0 ]E3 ]G0 ]H0 ]H1 ]H3 ]B0 ]B1 ]C1 Code 128 K Code 32 B Codabar Codabar (ABC Codabar) N Codabar (CDV & Send CD) Codabar (CDV & Not Send CD) UK Plessey P Matrix 2 of 5 Y Full ASCII Code 39 (Disable CDV) Full ASCII Code 39 (CDV & Send CD) D Full ASCII Code 39 (CDV & Not Send CD) Code 39 (Disable CDV) Code 39 (CDV & Send CD) M Code 39 (CDV & Not Send CD) IATA (Standard 2 of 5) R Industrial 2 of 5 V China Postal Code (Toshiba Code) H Interleaved 2 of 5 (Disable CDV) Interleaved 2 of 5 (CDV & Send CD) I Interleaved 2 of 5 (CDV & Not Send CD) GS1 DataBar G MT110L User’s Manual V1.0 ]C0 ]X0 ]F0 ]F1 ]F2 ]F4 ]P0 ]X0 ]A4 ]A5 ]A7 ]A0 ]A1 ]A3 ]R0 ]S0 ]X0 ]I0 ]I1 ]I3 ]E0 102 Appendix – ASCII Table MT110L User’s Manual V1.0 Note: ASCII 0~31 are non-printable characters, ASCII 32~127 are printable characters. Hex Dec ASCII 00 00 NUL (Null char.) 01 01 SOH (Start of Header) 02 02 STX (Start of Text) 03 03 ETX (End of Text) 04 04 EOT (End of Transmission) 05 05 ENQ (Enquiry) 06 06 ACK (Acknowledgment) 07 07 BEL (Bell) 08 08 BS (Backspace) 09 09 HT (Horizontal Tab) 0A 10 LF (Line Feed) 0B 11 VT (Vertical Tab) 0C 12 FF (Form Feed) 0D 13 CR (Carriage Return) 0E 14 SO (Shift Out) 0F 15 SI (Shift In) 10 16 DLE (Data Link Escape) 11 17 DC1 (XON) (Device Control 1) 12 18 DC2 (Device Control 2) 13 19 DC3 (XOFF) (Device Control 3) 14 20 DC4 (Device Control 4) 15 21 NAK (Negative Acknowledgment) 16 22 SYN (Synchronous Idle) 17 23 ETB (End of Trans. Block) 18 24 CAN (Cancel) 19 25 EM (End of Medium) 1A 26 SUB (Substitute) 1B 27 ESC (Escape) 1C 28 FS (File Separator) 1D 29 GS (Group Separator) 1E 30 RS (Request to Send) 1F 31 US (Unit Separator) 20 32 SP (Space) 21 33 ! (Exclamation Mark) 22 34 ” (Double Quote) 103 23 35 24 36 25 37 26 38 27 39 28 40 29 41 2A 42 2B 43 2C 44 2D 45 2E 46 2F 47 30 48 31 49 32 50 33 51 34 52 35 53 36 54 37 55 38 56 39 57 3A 58 3B 59 3C 60 3D 61 3E 62 3F 63 40 64 41 65 42 66 43 67 44 68 45 69 46 70 47 71 48 72 49 73 4A 74 MT110L User’s Manual V1.0 (Number Sign) $ (Dollar Sign) % (Percent) & (Ampersand) ` (Single Quote) ( (Right / Closing Parenthesis) ) (Right / Closing Parenthesis) * (Asterisk) + (Plus) , (Comma) – (Minus / Dash) . (Dot) / (Forward Slash) 0 1 2 3 4 5 6 7 8 9 : (Colon) ; (Semi-colon) < (Less Than) = (Equal Sign) > (Greater Than) ? (Question Mark) @ (AT Symbol) A B C D E F G H I J 104 4B 75 4C 76 4D 77 4E 78 4F 79 50 80 51 81 52 82 53 83 54 84 55 85 56 86 57 87 58 88 59 89 5A 90 5B 91 5C 92 5D 93 5E 94 5F 95 60 96 61 97 62 98 63 99 64 100 65 101 66 102 67 103 68 104 69 105 6A 106 6B 107 6C 108 6D 109 6E 110 6F 111 70 112 71 113 72 114 MT110L User’s Manual V1.0 K L M N O P Q R S T U V W X Y Z [ (Left / Opening Bracket) (Back Slash) ] (Right / Closing Bracket) ^ (Caret / Circumflex) _ (Underscore) ‘ (Grave Accent) a b c d e f g h i j k l m n o p q r 105 73 115 74 116 75 117 76 118 77 119 78 120 79 121 7A 122 7B 123 7C 124 7D 125 7E 126 7F 127 MT110L User’s Manual V1.0 s t u v w x y z { (Left/ Opening Brace) | (Vertical Bar) } (Right/Closing Brace) ~ (Tilde) DEL (Delete) 106 Version History Rev Date Description 1.0 2022.07.28 Initial Release MT110L User’s Manual V1.0 Issued Shaw 107 Read User Manual Online (PDF format) Loading...... Download This Manual (PDF format) Download this manual >>

MARSON MT110L SBR Laser Scanner User Manual

MT110L SBR Laser Scanner

Product Information

Specifications

Product Usage Instructions

Chapter 1: Introduction

Chapter 2: General Settings

Chapter 3: Interface

Chapter 4: Reading Mode

Chapter 5: Data Format

Chapter 6: Symbologies

FAQ

(Number Sign) $ (Dollar Sign) % (Percent) & (Ampersand) ` (Single Quote) (

Read User Manual Online (PDF format)

Download This Manual (PDF format)

MARSON User Manuals

Related Manuals