proceq GS8000 Subsurface Detection & Mapping User Guide

: June 5, 2024
: proceq

Table of Contents

proceq GS8000 Subsurface Detection & Mapping
Included
Quick Start Guide
Declaration of Conformity
Swiss Made Declaration
Notice
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

proceq GS8000 Subsurface Detection & Mapping

Included

Quick Start Guide

Scanning the QR code is only needed once, for the initial setup.

Green: in use
Ensure correct polarity when inserting the rechargeable AA batteries. Alternatively, you can use non-rechargeable AA batteries. Warning: do not charge non-rechargeable AA batteries!
Do not leave the batteries in the pack during storage for longer than 3 months. Remove the AA batteries by following the reverse procedure.
5V DC 2A power bank not included.

Green: charging; off: finished charging; orange: almost fully charged, temperature limit exceeded (wait or disconnect); red: AA cells incorrectly inserted or temperature limit exceeded (wait or disconnect). Do not let the battery pack discharge for longer than one month.

Ensure correct polarity when inserting the rechargeable AA batteries. Alternatively, you can use non-rechargeable AA batteries. Warning: do not charge non-rechargeable AA batteries!
Do not leave the batteries in the pack during storage for longer than 3 months. Remove the AA batteries by following the reverse procedure.
5V DC 2A power bank not included.

Dismounting the handle

Declaration of Conformity

Products: Proceq GS8000
Proceq Part Numbers: 393 55 100
Manufacturer: Proceq SA, Ringstrasse 2 8603 Schwerzenbach, Switzerland

Health: EN 62749:2010
Safety standards: EN 61010-1:2010
Laser classification: EN 60825-1:2014
IP classification: IP 68
Battery directive: 2006/66/EC
Restriction of hazardous substances (RoHS): 2011/65/EC
Radio equipment directive:
- 2014/53/EU(RED)
- EN 301 489-1 v2.1.1: 2017-02
- EN 301 489-33 v2.2.1: 2019-04
- EN 61326-1:2013
Radio compatibility EN 302 066 v2.1.1: 2017-01

The conformity is based on all essential and specific radio test suites for that radio equipment category identified by the involved Notified Body.
Proceq GS8000: the notified body Timco Engineering, Inc. (identification number 1177) performed the EU-type examination in compliance with Annex III Module B of the 2014/53/EU Directive and issued the EU-type examination Certificate No. XXXX-XXXXXX-XX-CE. The frequency range is 40 MHz to 3440 MHz with a maximum output power of ≤ -12 dBm (conducted).
Proceq GS8000 (FCC ID: 2ANPE-GS8000): This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Operation of this device is restricted to law enforcement, fire and rescue officials, scientific research institutes, commercial mining companies, and construction companies. Operation by any other party is a violation of 47 U.S.C. § 301 and could subject the operator to serious legal penalties.

Swiss Made Declaration

Products: Proceq GS8000
Proceq Part Numbers: 393 55 100
Manufacturer: Proceq SA, Ringstrasse 2 8603 Schwerzenbach, Switzerland

We confirm that the Proceq GS8000 instrument was developed and manufactured in Switzerland and fulfills the requirements needed for the declaration “Made in Switzerland” or “Swiss Made”. The requirements for industrial products are specified in detail in the National Swiss Trademark Protection Statute (Art. 47-50, MSchG) covering goods and services.

Notice

This document (incl. Quick Start Guide and Product Certificates) constitutes an integral part of Proceq’s General Terms and Conditions of Sale and General Terms and Conditions of Rental, together with any other guideline, precautions, policies and conditions which Proceq has made and may make available to you at www.proceq.com/downloads, as amended from time to time (the Documents). Proceq reserves the right to change without notice any information, specifications and recommendations contained in this document and in any of the associated Documents.
You shall observe and be solely responsible for the safe and lawful use of this product, as well as your conduct while using it and any consequences arising thereof. The use and operation of this product is at your own discretion and risk. Proceq hereby disclaims any and all loss, liability or damages resulting from or out of your use of the product. Please ensure you operate and use this product only for purposes that are proper and in accordance with the instructions given herein together with all safety and health precautions, applicable laws, rules, regulations, and as provided for in any of the Documents.