MiBOXER K1 Rotating Switch Panel Remote Instruction Manual
- June 6, 2024
- MiBOXER
Table of Contents
MiBOXER K1 Rotating Switch Panel Remote Features
It’s made by 2.4GHz wireless control technology with low power consumption, long distance, strong ability for anti-interference and quick communication. Power supply is CR2032 battery, the rotating switch can dim brightness and color temperature, it’s compatible for MiBoxer single color and cct led lamp.
- Control distance 30m
- One remote supports unlimited led light
- Magnetic installation method, more convenient
Parameters
- Model No.: K1
- Working Voltage: 3V (CR2032 battery) Transmitting Power: 6dBm
- Standby Power: <6uA
- RF: 2.4GHz
- Control Distance: 30m
- Working Temperature: -10~40℃
Function
Rotating Switch
Short press: turn on/off light
Rotating: dim brightness
Long press while the light is on: until indicator is blinking, switch to
cct dimmable, rotate it to dim color temperature.
Attention: the device will log out cct mode if user don’t operate it within 3 seconds）Long press while the light is off： enter into night light mode.
“SET” button:
Link Code: please power off the lamp 10 seconds and power on again, short
press “SET” button 3 times within 3 seconds, the light is blinking 3 times
slowly, linking code is done. Unlink Code: please power off the lamp 10
seconds and power on again, short press”SET” button 5 times within 3 seconds,
the light is blinking 10 times quickly, unlink code is done.
Note: For TRI-C1 triac dimmer, long press “SET” button, the indicator is
blinking quickly. device enter into night light mode, for more information,
please review instruction of TRI-C1.
Installation
- Tear out the back tape
- Stick the holder on the position where you want
- Install CR2032 battery
- Put the rotating switch on the front of holder
Attention
- Children should use it under the inspection of Adult, avoid to eat button cell.
- Please don’t use device near metal or magnetic area, it will affect control distance seriously.