DynaScan DS552LT6-2 55 Inch Clean Back Digital Signage User Manual
- June 6, 2024
- DynaScan
Table of Contents
DynaScan DS552LT6-2 55 Inch Clean Back Digital Signage
Material Contents Declaration
Part Name
| Hazardous Substances
---|---
Lead| Mercury| Cadmium| Hexavalent Chromium|
Polybrominated Biphenyls| Polybromodiphenyl Ethers
Pb| Hg| Cd| Cr 6+| PBB| PBDE
PCBA| O| O| O| O| O| O
CHASSIS| O| O| O| O| O| O
ACCESSORY| O| O| O| O| O| O
PACKAGE| O| O| O| O| O| O
“O” indicates that the level of the specified chemical substance is less than
the threshold level specified in the standards of SJ/T-11363-2006 and EU
2005/618/EC.
“Δ indicates that the level of the specified chemical substance exceeds the threshold level specified in the standards of SJ/T-11363-2006 and EU 2005/618/EC.
Recycling and Energy Information
DynaScan is firmly committed to its environmental protection efforts and we believe that reducing our products’ impact on the environment is of the utmost importance. We are dedicated to meet the latest environmental protection regulations.
Energy usage
| Mode | Energy Consumption |
|---|---|
| Normal | Max. 400 W |
| Standby | < 1 W |
Disposal Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being. When replacing old appliances with new one, the retailer is legally obligated to take back your old appliances for disposal at least for free of charge.
Declaration of Conformity
FCC This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment
has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
CAUTION: Any changes or modifications not expressly approved by the
grantee of this device could void the user’s authority to operate the
equipment.
RF exposure warning This equipment must be installed and operated in
accordance with provided instructions and the antenna(s) used for this
transmitter must be installed to provide a separation distance of at least 20
cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter. End-users and installers must be
provided with antenna installation instructions and transmitter operating
conditions for satisfying RF exposure compliance.
Manufacturer Name Manufacturer Address DynaScan Technology Corp. 6F, No. 88 Wenmao Rd., Guishan Dist, Taoyuan City 333001, Taiwan This device complies with Directive 2014/53/EU issued by the Commission of the European Community.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>