ANATEL WiFi Stick 3.0 Fox ESS Installation Guide
- June 5, 2024
- ANATEL
Table of Contents
ANATEL WiFi Stick 3.0 Fox ESS
WiFi Stick Installation
Step 1:
ForUSB
Rotate the lock, make sure the triangle mark is on the front and centered.
Plug the Smart WiFi into WiFi/GPRS port under the bottom (underside) of the
inverter.Tighten the nut clockwise as following.
For 4P Aviation plug
Plug the Smart WiFi into WiFi/GPRS port under the bottom (underside) of the
inverter. Make sure the label face to front. Tighten the nut clockwise as
following.
Step 2:
Power on the inverter (in accordance with the start-up procedure detailed in
the inverter installation manual).
- For Brasil: Regulamento Anatel sobre equipamentos de Radiocomunicayao de Radia9ao Restrita (Resolu(,iio n° 680): “Este equipamento niio tern direito a prote9iio contra interferencia prejudicial e niio pode causar interferencia em sistemas devidamente autorizados”.
- Warning: This is a class A Product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
- Products exported to Brasil have obtained ANATEL certification, and the following signs will be placed on the shell.
APP Installation
Scan the QR Code below to download and install the FoxCloud APP on your
smartphone.
Configuration
Step 1:
Connect your mobile device with Smart WiFi. The SSID of the Smart WiFi is
‘W-xxxxx’ and the password is ‘mtmt2020’.
Step 2:
After connecting successfully. Open browser and enter ‘192.168.1.1’ on the
address bar on top.
Step 3:
Drop down the WiFi SSID menu to find house router and input the house router’s
password. Click ‘Save’.
Register An Account
For Installer
Step 1:
Please click ‘Sign Up’, enter installer’s information to complete the
installer account registration. 
Note: If you already have an
installer/agent account, please press ‘Sign In’ and enter with your
installer/agent account directly.
Step 2:
Select ‘Installer’ and enter Installer name, then click ‘OK’. We suggest you
complete all information to ensure after-sales service.
Note:
Installer: The installer Agent: The agent/distributor/installation company
.
For End User
Step 1:
Please click ‘Sign Up’, enter end user’s information to complete the end user
account registration.
Step 2:
Select ‘End User’ then scan the WiFi bar code on the Smart WiFi, and click
‘OK’. We suggest you complete all information to ensure after-sales service
.
Create A Plant
For Installer
Step 1:
Open the APP, login with your Installer/agent account.
Step 2:
Press the ‘+’ icon on the homepage to add plant. Press the scan icon next to
the ‘Datalogger List’ to scan the QR code label on front side of the Smart
WiFi.
Note: After starting the APP, it will pop-up a message ‘Whether to allow
positioning permissions’, please select ‘Allow’. For the PV Size, please fill
in the actual capacity of the installed solar panels.
For End User
Step 1:
Open the APP, login with your end user account
Step 2:
Press the ‘+’ icon on the homepage to add plant. Press the scan icon next to
the ‘Datalogger List’ to scan the QR code label on front side of the Smart
WiFi.
Note: After starting the APP, it will pop-up a message ‘Whether to allow
positioning permissions’, please select ‘Allow’. For the PV Size, please fill
in the actual capacity of the installed solar panels. If SN has been bound to
the plant already, APP will go to the page as beside. If SN has not been bound
before, please refer to step 3.
Step 3:
Oveiview Sites Me After scanning code successfully, click ‘OK’ on the top
right corner of the page, APP will pop-up a message ‘Add Datalogger’, please
click ‘OK’. Complete allrequired information and click ‘OK’ on the top right
corner of the page.
The manual is updated frequently. Please scan the code to download the latest
version.
E-mail: [email protected]
Website: www.foxesscloud.com