Skindfense K3-Plus AI Infrared Thermometer User Manual
- June 6, 2024
- Skindfense
Table of Contents
Skindfense K3-Plus AI Infrared Thermometer
Function Button
- Infra-red Thermometer
- Infra-red Ranging Sensor
- Buzzer
- Alarm Light
- Temperature Display
- Switch
- Mode Button
- Charging LED
- USB
- Helical
- Battery Compartment
Operation
Power ON/OFF
- Open the battery cover and install a 18650 battery correctly, or connect USB (voltage 5V) for power supply (Fig. 1 and Fig. 2)
- Press the switch to 1 to turn on the device.
- Temperature Measure-ment: Place your forehead or hand within 2-4 inches of the device. (Fig. 3)
Mode Switching
- Press the mode button to switch the display to Fahrenheit (display F) or Celsius (display C).
- Mode: Press and hold mode button for 3 seconds to switch the temperature measurement mode (Sur: surface mode; bod: object mode; Cou: counting mode)
- Default Object Mode
Status Description
- Standby: The red dot at the bottom of the display lights up in turn. (Fig. 4)
- Insufficient Power: The horizontal bars light up in the middle of the display. (Fig. 5)
- Normal Temperature (89.6˚F – 99.1˚F / 32˚C – 37.3˚C): Flashing green lights and alarm beeps. (Fig. 6)
- High Temperature (99.3˚F – 100.2˚F / 37.4˚C – 37.9˚C): Flashing yellow lights and alarm beeps twice. (Fig. 7)
- Abnormal Temperature (100.4˚F – 107.6˚F / 38˚C – 42˚C): Continuous red light flashing and alarm beeps for 5 sec-onds. (Fig. 8)
- Ultra Low Temperature (>89.6˚F / >32˚C): Flashing red lights and alarm and Lo on display. (Fig. 9)
- Ultra High Temperature (<107.6˚F / <42˚C): Flashing red lights and alarm and Hi on display. (Fig. 10)
Sleep Mode and Restart
To save power, the machine will automatically shut down when idle for 1 hour. Press the mode key or toggle the ON/OFF switch to restart the machine and resume use. Avoid exposing the unit to direct sunlight.
Installation Method
Specifications
| Screen | Digital Display |
|---|---|
| Accuracy | +/- 0.2 Degrees |
| Response Time | 0.5 Seconds |
| Abnormal Automatic Alarm | Flashing + Beeping Sound |
| Automatic Measurement | Measuring Distance 2-4 inches |
| Charging Method | DC5V 1A or Battery (18650 Li-ion) |
| Input | USB DC 4.2-5V |
| Infrared Measuring Range | 32˚F – 122˚F |
| Environmental Temperature | 50˚F – 104˚F |
| Weight | 8 oz. |
| Dimensions | 6.10 x 4.09 x 3.30 inches |
| Standby | Approximately One Week |
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>