BATAVIA BT-CJS002 Maxx Pack 18V Cordless Jig Saw Instruction Manual

BT-CJS002 Maxx Pack 18V Cordless Jig Saw
Instruction Manual Operating instructions
Model: BT–CJS002
Item-No.: 7062513
www.batavia.eu

BT-CJS002 Maxx Pack 18V Cordless Jig Saw

Dear customer
Please familiarize yourself with the proper usage of the device by reading and following each chapter of this manual, in the order presented. Keep these operating instruc- tions for further reference.

Please read the enclosed “General safety
instructions for power tools” and all additional safety instructions in this operating instructions!
This manual contains important information on operating and handling the device. Keep these operating instructions for further reference. Please pass it on along with the unit if it is handed over to a third party.
Battery and charger not included!
The battery is available separately under art. No: 7062517 (2Ah) or 7062518 (4Ah). The charger is available separately under art. No: 7062519.
These items are available online and in participating stores.

Explanation of the symbols

The following symbols are used in the user manual or on the product:
Warning! To reduce the risk of injury, the user must read the instruction manual.
Denotes risk of personal injury, loss of life or damage to the tool in case of non-observance of the instructions in this manual.
Always wear hearing protection.
The effects of noise can cause hearing loss.
CE stands for “Conformité Européenne”, which means “In accordance with EU Regulations”.
With the CE marking, the manufacturer confirms that this Electric tool complies with the applicable European directives.
Do not dispose of electric power tools with domestic refuse.

Additional safety instructions

• Please read this manual carefully and use the unit only according to this manual.
• Dispose of used packaging material carefully or store it out of the reach of children. There is a danger of suffocation!
• Persons with limited physical, sensorial or mental abilities are not allowed to use the machine, unless they are supervised and briefed for their safety by a qualified person.
• The unit is not a toy and does not belong in the hands of children. Never leave the unit unsupervised when in use. Keep it out of reach of children or persons in need of supervision. Children should be supervised to ensure that they do not play with the unit.
• Do not cut or saw where there may be hidden electricity, gas or water utility services.
• Periodically check all nuts, bolts and other fixings and tighten where necessary.
• Should the unit become damaged do not use it any further and have it repaired by a professional or contact our customer service. Do not disassemble the unit or try repairing it yourself.
• Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.
• Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.
• Hold the power tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a “live” wire will also make exposed metal parts of the power tool “live” and give the operator an electric shock.
• Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by your hand or against the body leaves it unstable and  may lead to loss of control.

Additional safety instructions for jig saws

3.1 Only use saw blades that are suitable for this model. Do not cut with blunt, damaged or bent saw blades. Make sure the saw blade is firmly tightened before switching on  the unit.
3.2 Do not attempt to cut workpieces so small that they cannot be securely fastened. Do not support the workpiece with your hand or your foot. There is danger of kick- back! Do not reach over the front of the unit or place either hanin the vicinity of the saw blade, e.g. to remove lose splinters, swarf/shavings or jammed workpiece fragments.
3.3 Always remove the battery when not in use, before maintaining or changing thsaw blade.
3.4 For your safety, please wear safety goggles, a dust mask and ear protection.
3.5 Make sure there are no nails, screws osimilar items in the work piece.

Before the first use

Unpack the saw and check the unit for any damage in transit. Dispose of packaging materials or store it out of reach of children.
Plastic bags etc. may become a deadly toy for children.
Please note that the battery and charger are not included with the tool!

Contents of packing

1× Jig saw
1× Parallel guide
1× Allen key
1× Dust extraction adaptor
1× Manual

Intended use

This tool is intended for sawing. This battery powered jig saw should be used for private households only.

Use

7.1 Switching on / off
a. Press the ON/OFF switch (3). The ON/ OFF switch can be locked in position for continuous operation by pressing the locking button (2).
b. Press ON/OFF switch (3) again to release the locking button (2). To switch off the saw, release the ON/OFF switch.
7.2 Inserting a saw blade
a. Before undertaking any work on the machine, disconnect it from the power mains.
b. To insert the saw blade first fold the transparent protective cover (10) up.
c. Loosen the saw blade holder lock (11) by turning until the saw blade can be inserted into the holder all the way.
d. Allow the saw blade lock to turn back and the saw blade is tight.
e. After that fold the protective cover back down. The protective cover must always be used.
NOTE: The saw blade will become very hot during cutting due to friction. Pay attention for that when removing the saw blade. Protect yourself with protective gloves if necessary.

7.3 Adjusting the pendulum stroke
The pendulum is adjusted with the pendulum stroke adjusting lever (7). The pendulum gives the saw blade a horizontal pendulousness. At level 0 the saw blade does not execute any pendulum movement; the biggest pendulum movement is at level 3. When moving downwards, the saw blade is pushed backwards to ease the throw-off of the splints. Because of this the cutting speed for longitudinal sections rises and less power is needed while sawing. Furthermore, the lifetime of a saw blade is increased.

7.4 For cutting
a. Metal set the pendulum stroke to 0 or 1.
b. Core board, plywood and plastics set the pendulum stroke to 1 or 2.
c. Hard- and softwood and particle and flake boards set the pendulum stroke to 1, 2 or 3.

The harder the material to be cut is the smaller the pendulum stroke can be and the softer the material is the larger the pendulum stroke should be set.
NOTE: Because of the additional vertical movement, the cutting edges will be torn out more as if working without pendulum. The surface coatings of wood plate especially tend to fray because of their refractory structure when working with additional pendulum.

7.5 Making bevel cuts
You can make bevel cuts to 45° with this saw if you angle the base plate.
a. First, loosen the two internal allen screws (15) which can be seen in the central opening of the base plate by using the included Allen key (5).
b. After loosening, push the base plate slightly back until the metal teeth in the housing disengages from the base plate.
c. Now you can adjust the base plate to the angle desired.
d. Fix it in that position by pushing forward and tightening the internal hex head screws.

7.6 Dust extraction
Make sure the switch (13) for dust collection resp.
dust blowing function is in the position for dust collection.

| Dust collection
---|---
| Dust blowing Function

The jig saw can be connected to a dust extractor or a vacuum cleaner with the included adaptor pipe. Insert the adapter into the saw. Always use a dust removal, if possible, or at least a dust mask for your own safety. To keep the cutting line clear of chips, place the suction/blowing function switch (13) in the direction of “blowing”. The airflow keeps the cutting line clean.

7.7 Parallel guide
Use the parallel guide (14) delivered for a cutting guide parallel to a wood edge.
a. To install the parallel bar, slide it through the mounting latches (9) in the base plate. With the centimetre scale on the guide bar you can precisely set the distance between  the edge and the saw blade.
b. With the screws in the base plate the guide bar can now be secured.

7.8 Saw blade types
Use only T-shank jig saw blades.

Cleaning and maintenance

• Remove the battery before undertaking any cleaning or maintenance work.
• Do not use aggressive chemicals which may dissolve plastic parts, or abrasives.
• After every use clean the unit of wood dusts with a hand brush or a cloth. You must particularly clean regularly the air exhaust of the motor. The motor can overheat if  the ventilation slots are closed.
• Maintenance and repair work can only be done by a qualified technician.
• Always store the unit in a dry place that is protected from dust and dirt.

Technical data

Stroke rate: . . . . . . . . . . . 0 – 3000 min-1
Angle baseplate: ……..-45° – 0° – 45°
Cutting rate wood: ………..80 mm
Cutting rate steel: . . . . . . . . . . . . 6 mm
Cutting rate in plastics: . . . . . . . . 12 mm
Weight (without battery): . . . . . . . 1.62 kg
Sound pressure Level LpA: . . . . 85.9 dB(A)
Uncertainty KpA: . . . . . . . . . . . . 3 dB(A)
Sound power Level LWA: …… 96.9 dB(A)
Uncertainty KWA: …………
3 dB(A)Hand arm vibration in wood: …. 7.74 m /s2
Uncertainty K: . . . . . . . . . . . . .1.5 m/s2
Hand arm vibration in steel: . . . . 5.84 m/s2
Uncertainty K: . . . . . . . . . . . . .1.5 m/s2

Disposal

Do not dispose of electric power tools with domestic refuse. The electric power tool is shipped in packaging to reduce transport damage. This packaging is a raw material and as such can either be reused or can be fed back into the raw material cycle. The electric power tool and its accessories are made from various materials such as metals and plastics. Take defective components to a special refuse collection point. Ask about these at your specialist shop or local council.

10.1 Batteries
Think of the environment when disposing of batteries. Contact your local authorities to find out where your nearest disposal area is.
Do not dispose of batteries with domestic refuse. Do not dispose of by burning, risk of explosion.

EC-Declaration of conformity

We, the Batavia B.V., Weth. Wassebaliestraat 6d, NL-7951 SN Staphorst, declare by our own responsibility that the product Cordless jig saw, Item-No 7062513, Model Nr. BT–CJS002 is according to the basic requirements, which are defined in the European Directives Electromagnetic Compatibility 2014/30/EU (EMC), 2006/42/EC (Machinery), 2011/65/EU (RoHS) and their amendments. For the evaluation of conformity, the following harmonized standards were consulted:

EN 62841-1:2015;
EN 62841-2-11:2016;
AfPS GS 2019:01 PAK;
EN 55014-1:2017;
EN 55014-2:2015
Staphorst, 11 February 2021

Meino Seinen, QA Representative Batavia B.V., Weth. Wassebaliestraat 6d, 7951 SN Staphorst, Netherlands
The product and the user manual may be subject to changes. Technical data may be changed without prior notice.

2 YEAR WARRANTY

This product has got a 2 year warranty
Dear Client, if for any reason this product is not working, please ensure you contact our Client Service Centre. Ensure you have your original receipt of purchase. This warranty covers all defects in workmanship or materials in this Batavia product for a two year period from the date of purchase.
The warranty does not cover any malfunction, or defect resulting from misuse, neglect, alteration, or repair.

Deutschland – Kundenservice – Montag bis Freitag von 9 bis 17 Uhr
**01805 937 832*
Other European countries – Customer Services /
Autres pays d’Europe – Service clientèle /
Overige landen Europa – Klantenservice
Monday till Friday from 8 am until 4 pm / Lundi jusqu’à Vendredi de 9 – 17 heure / Maandag t/m vrijdag van 9 tot 17 uur
00800 664 774 00**

*Nur €0,14 /Minute aus dem dt. Festnetz, max. €0,42/Minute aus den Mobilfunknetzen

Model: BT–CJS002
Item-No.: 7062513
www.batavia.eu | [email protected]
BATAVIA B.V.
Weth. Wassebaliestraat 6d
7951SN Staphorst | Netherlands

Documents / Resources

| BATAVIA BT-CJS002 Maxx Pack 18V Cordless Jig Saw [pdf] Instruction Manual
BT CJS002, Maxx Pack 18V Cordless Jig Saw, 18V Cordless Jig Saw, Jig Saw, Cordless Saw, Saw
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>