BATAVIA 7064210 USB Power Adapter with LED Light Instruction Manual

: October 27, 2023
: BATAVIA

PACK 18V

USB Power adapter with LED light

BATAVIA 7064210 USB Power Adapter with LED Light

Operating instructions

Model: BT-CPB001
Item-No.: 7064210
www.bataviapower.com

BATAVIA 7064210 USB Power Adapter with LED Light 1

Overview

LED light
ON/OFF Switch
Belt clip
USB connection
Control led
Battery
(not included)

Dear customer
User Guides provide useful tips on how to use your new device. They help you to use all functions, avoid misunderstandings and prevent damage. Please take your time to read this manual carefully and keep it for future reference.
Please read the separately attached “General Safety Instructions for Power Tools” and all additional safety instructions in these operating instructions!
These operating instructions contain important information on the operation and handling of the unit. Keep these operating instructions for further reference. Please pass it on together with the unit if it is handed over to third parties.

Battery and charger not included.

The Maxxpack batteries and chargers are available online and in participating shops.

1. Explanation of symbols

The following symbols are used in the User Guide or on the product:

WARNING – Read the instructions to reduce the risk of injury.

General warning – Be alert and pay attention to general hazards.

Do not expose the unit to rain or water except for the tank.

UKCA UKCA stands for: “UK Conformity Assessment”. This means “Compliant with UK regulations”. With the UKCA mark manufacturer confirms that this unit complies with the applicable UK regulations.

CE stands for: “Conformité Européenne”. This means: “Compliant with EU directives”. With the CE mark manufacturer confirms that this unit complies with the applicable European directives.

The unit must not be disposed of with household waste.

2. Specific safety instructions

Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

CAUTION! Do not stare into the light beam. The optical radiation can be harmful for your eyes.

Do not direct the light beam at persons or animals and do not stare into the light beam yourself (not even from a distance).
Do not point the beam at: cars, motorcycles, aircraft, ships or any other vehicle or machinery that is operated by a person. Bright light can be blinding and you could cause a serious accident.

3. Before first use

Remove the machine and the accessories from the packaging. Check the machine for transport damage and do not use the machine in case of damages. Keep the packing materials away from children, risk of suffocation!

4. Intended use

The USB power adapter with LED light is only intended for use in combination with a battery of the Maxxpack 18V series.
The USB power adapter is intended as a power source via the USB connections. The LED light is not suitable for lightning rooms in homes.

5. Use

Slide the USB Power adapter onto a charged battery, the adapter should click into place.

5.1 LED light

Press the on/off button (2) for 2 seconds to activate the power adapter.
The control LED (5) lights up to indicate that the power adapter is activated.
Press the on/off button (2) the LED light lights up (100%).
Press the on/off button (2) again to dim the LED light (50%).
Press the on/off button (2) again to switch off the LED light.

5.2 Charging USB device

Connect a USB device with a suitable cable to the power adapter via the USB connection (4).
Press the on/off button (2) for 2 seconds to activate the power adapter.
The control LED (5) lights up to indicate that the power adapter is activated.
When the device is charged, the device must be disconnected from the power adapter.

Note: the power adapter will turn off automatically after 30 seconds when no USB device is connected to the power adapter.

Remove the battery when you are no longer using the device. Press the release button on the battery and slide the power adapter off the battery.

6. Cleaning, maintenance and storage

6.1 Cleaning

Clean the machine regularly with a damp cloth and a little mild soap. Do not use cleaning agents or solvents; these may damage the plastic parts of the machine. Make sure that no water can get into the inside of the machine.

6.2 Maintenance

There are no serviceable parts inside the machine.

6.3 Storage

Store the unit and accessories in a dark, dry and frost-free place.

7. Technical data

Rated voltage . . . . . . . . . . . . . . . . . . 18V
Output . . . . . . . . . . . . . . . 2× USB 5V ; 2,4A
Work light . . . . . . . . . . . . . . . . . . . . 2W LED
Lumen . . . . . . . . . . . . . . . . . . . 150-200 lm
Weight . . . . . . . . . . . . . . . . . . . . . . . 0.1 Kg

8. Waste treatment and recycling

The unit must not be disposed of with household waste.

Machine has been packed in a packaging for avoiding transport damage. This packaging consists of raw materials and can therefore be reused or returned to the raw material cycle. Machine and its accessories consist of different materials, e.g. metal and plastics. Dispose of defective parts as hazardous materials. Ask specialist dealer or municipal authorities for further details!

Product and operating instructions may change. Technical data may be changed without prior notice.

8.1 Batteries

Consider protecting the environment when disposing of batteries. Please contact your local authorities for environmentally friendly disposal.

9. EG Conformity Statement

We, Batavia B.V., Wethouder Wassebaliestraat 6d, NL-7951 SN Staphorst, hereby declare that the unit USB Power adapter with LED light, Model BT- CPB001, Article No. 7064210 is in compliance with the relevant essential health and safety requirements of the EC Directives, based on its design and construction and on the version that we put into service: 2014/30/EU

(Electromagnetic Compatibility), 2011/65/EU (RoHS). Following harmonised standards have been applied for the conformity assessment:
EN 61547:2009
EN IEC 55015:2019+A11:2020
EN 55032:2015+A11:2020+A1:2020
EN 55035:2017+A11:2020
AfPS GS 2014:01 PAK

Staphorst, 30 June 2022

Technical documentation kept by:
Meino Seinen, Batavia B.V., Weth.Wassebaliestraat 6d, 7951 SN Staphorst, Netherlands
UK Declaration of Conformity
We, the Batavia B.V., Weth. Wassebaliestraat 6d, NL-7951 SN Staphorst, Netherlands declare by our own responsibility that the product Mini circular plunge saw, Item-No 7064048, Model Nr. BTCCS004 is according to the basic requirements, which are defined in the Electromagnetic Compatibility Regulations 2016, Electrical Equipment (Safety) Regulations 2016 and their amendments.
Staphorst, 18 May 2022

Technical documentation kept by:
Meino Seinen, QA Representative Batavia B.V., Weth. Wassebaliestraat 6d, 7951 SN Staphorst, Netherlands
The product and the user manual may be subject to changes. Technical data may be changed without prior notice.
The product and the user manual may be subject to changes. Technical data may be changed without prior notice.