anslut 017144 LED Strip Instruction Manual
- June 6, 2024
- anslut
Table of Contents
LED STRIP
Item no. 017144
OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for
future reference.
(Translation of the original instructions)
Care for the environment!
Must not be discarded with household waste! This product contains electrical
or electronic components that should be recycled. Leave the product for
recycling at the designated station e.g. the local authority’s recycling
station.
Jula reserves the right to make changes. In the event of problems, please
contact our customer service. www.jula.com
For the latest version of operating instruction, see
www.jula.com
2021-06-22
© Jula AB
SAFETY INSTRUCTIONS
- Read the operating instructions carefully before use.
- Check that all connections are properly made before switching on the product.
- If the product does not work, check that the circuit is supplied with voltage.
- Keep children at a safe distance from the product when it is in use.
- If the permitted maximum voltage is exceeded this can damage the product, or reduce its life span.
- Do not look directly into the light source.
- Store out of the reach of children.
- Do not cover the product when in use.
- Always unplug the power cord and allow the product to cool before cleaning, or maintenance to reduce the risk of electric shock.
- The light source is not replaceable. Discard the product if the light source stops working.
- Do not open or dismantle the product. The product does not have any parts that can be repaired by the user.
SYMBOL
| Read the instructions.
---|---
****| Approved in accordance with the relevant directives.
| Recycle discarded products in accordance with local regulations.
TECHNICAL DATA
| Rated voltage | 220-240 VAC 50 Hz/ 24 VDC |
|---|---|
| Output | 5 W |
| Luminous flux | 460 Im |
| Color temperature | 3000K |
| No. of LEDs | 320 |
| Protection rating | IP20 |
| Size | 1000 x 8 x 2.3 mm |
| Cord length | 1540mm |
| Operating temperature | -20 — 40°C |
| Storage temperature | -20 — 45°C |
USE
-
Remove the protective paper and attach the LED strip at the required place. FIG. 1
Do not bend the strip too much. FIG. 2 -
Connect the cord to the plug.
-
Plug the plug into a PowerPoint. The LED strip can be cut at the markings. FIG. 3
MAINTENANCE
Wipe the product with a dry, soft cloth when necessary.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>