Cuisinart DCC-3000P1 12-Cup Programmable Coffee Maker User Manual
- June 11, 2024
- Cuisinart
Table of Contents
Cuisinart DCC-3000P1 12-Cup Programmable Coffee Maker
to set the time
Turn Function Dial to Clock. Press and hold Hour or Minute button until the clock begins flashing. Hold down or press and release button until the desired time is displayed. Numbers will stop flashing.
to program the auto off
Turn Function Dial to Auto Off. Follow the “Set Time” instructions in the Instruction Booklet to program the coffeemaker to shut off 0 to 4 hours after the brew cycle is finished.
to program the auto on
- Turn the Function Dial to PROG; the AUTO ON LED will flash. Follow the “Set Time” instructions to program brew-start time. Turn Function Dial to AUTO ON and press the On/Off button. The green AUTO ON light signals advanced brew-start function is on.
- At the programmed time, the blue On/Off indicator light will come on, to indicate brew cycle is starting.
- To start the brew cycle at the same time the next day, turn Function Dial to AUTO ON and press the release On/Off button once more. The green Auto On light will turn on.
- Coffee on Demand™ 12-Cup Programmable Coffee Maker
Please see the reverse side for Setup and Use
Setup and Use
- Fully immerse the charcoal water filter in cold tap water and soak for 15 minutes (see complete instructions on pages 6-7 of your Instruction Booklet). Insert the filter into the water filter holder. Open the lid to the water reservoir and place inside.
- Remove and fill the water reservoir for the number of cups you’re brewing. Replace the reservoir, pushing it down firmly in place.
- Insert the permanent gold-tone or paper filter into the filter basket holder. Using the scoop provided, add 1 scoop of ground coffee per cup – you can adjust the amount to taste. Make sure the filter basket is securely in place and lid is completely closed.
- Plug in the unit, turn Function Dial to Brew, press the On/Off Button, and the blue indicator will light up. To delay-brew start, turn the dial to Auto On. Green Auto On will light up.
- When the brew cycle is complete, five beeps sound and the On/Off indicator light will turn off. Place a mug or cup on the drip tray and press the lever to pour coffee. The cup area lights up when the lever is pressed to pour coffee.
IMPORTANT!
Do not throw it away. Read before operating your new coffeemaker. Keep for
quick reference. This guide is a supplement to the instruction booklet. To
ensure proper operation and optimum performance, please read the entire
Instruction Booklet.
Download PDF:Cuisinart DCC-3000P1 12-Cup Programmable Coffee Maker User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>