JOBY Wavo Pro Microphone for Camera and Smartphone Instructions
- June 6, 2024
- JOBY
Table of Contents
JOBY Wavo Pro Microphone for Camera and Smartphone
DISCLAIMER
The information contained in this document is subject to change without
notice.
Vitec Imaging Solutions makes no warranty and shall not be liable for ar
errors on information contained in this document.
Any changes or modifications not expressly approved by Vitec Imaging Solutions
could void the user’s authority to operate this equipment.
INFORMATION FOR USERS
In accordance with Article 10 of Directive 2012/19/ UE of the 04/07/2012
concerning Waste Electrical and Electronic Equipment (WEEE).
The above symbol, also present on equipment, indicates that, at such time as
the user should decide to dispose or the equipment, it must NOT be disposed of
as unsorted municipal waste, but must be collected separately. The same
applies to all components waste, but must be collected separately. The same
applies to all components of the equipment and any recharge or refill elements
that the product may comprise.
For information on the waste collection systems suitable for this equipment,
contact Vitec Imaging Solutions or any authorised member of the National
Registers in EU countries. Household ( or similar) waste may be disposed of
via standard municipal differentiated waste collection schemes.
If you purchase a new version of this model or similar equipment – or if your
existing equipment measures less than 25 cm – you may return the items you no
longer require to your retailer who will take care of contacting the company
or organization handling the proper collection and management of used
equipment.
Correct separate collection and specific treatment of WEEE are necessary to
avoid potential damage to human health and the environment, and favour the
recycling and recovery of component materials.
Improper or illegal disposal of this product by the user will result in
punishments or fines being applied in accordance with national Decrees based
on Directive 91 /156/EC and 2008/98/EC.
USA
FCC ID: 2AQ5K-WAVO PRO
Declaration of conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.’
“No changes shall be made to the equipment without the manufacturer’s
permission as this may void the user’s authority to operate the equipment”.
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This device complies with the safety requirements for RF exposure for portable use conditions in accordance with FCC rule part 2.1093 and KDB 44 7 498 D01.
CANADA (ISED)
“This device complies with ISED’s license-exempt RSSs.
Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may
cause undesired operation of the equipment”.
This device complies with ISED Canada RSS-102 radiation exposure limits set forth for the general population.
This device complies with the safety requirements for RF exposure in accordance with RSS-102 Issue 5 for portable usage conditions.
CERTIFICATIONS
EU
Manufacturer’s name :
Vitec Imaging Solutions
Manufacture’s address :
Via Valsugana 100, 36022 Cassola (VI), Italy
Product name: WAVO PRO
Product code: JB01715-BWW
Simplified Declaration of Conformity
Hereby, “Vitec Imaging Solutions” declares that the radio equipment type “WAVO
PRO” is in compliance with Directive 2014/53/EU and with Directive 2011/65/CE
and its amendments.
The full text of the EU declaration of conformity is available at the
following internet address
KOREA CERTIFICATION
Class B Equipment
(For Home Use Broadcasting & Communication Equipment)
This equipment is home use (Class B) electromagnetic wave suitability equipment and to be used mainly at home and it can be used in all areas.
R-R-021-WAVO PRO
After sales service:
Saeki P&C Co.,Ltd
After sales service:
Saeki P&C Co.,Ltd
Saeki Building 22-12 Supyo-ro, Jung-gu,
04555 Seoul, South Korea
Phone no: +82-2-3668-3116
CHINA
SRRC
WAVO PRO: CMIIT ID xxxxxx
AUSTRALIA – NEW ZEALAND
TAIWAN
WAVO PRO: NCC xxxxxxx
NCC approved device
RUSSIA – BELARUS – KAZAKHSTAN –
KYRGYZSTAN – ARMENIA
For After Sales Information visit joby.com
twitter.com/jobyinc
facebook.com/jobyinc
instagram.com/jobyinc
youtube.com/jobyinc
Vitec Imaging Solutions Spa
Via Valsugana 100
36022 Casso la (VI) – Italy
© 2019 Vitec Holdings Italia Sri
JOBY is a registered
trademark of
Vitec Holding Italia Sri