JOBY JB01641 Spin Pocket-Sized 360-Degree Powerhouse for Smartphone User Manual
- June 6, 2024
- JOBY
Table of Contents
JOBY Spin™
WARNING !
ATTENTION !
Manually rotating the Spin can damage it and reduce its lifespan.
| PAYLOAD
Panning max 750g / max 1.65lb
Tilting max 500g / max 1.10lb
---|---
| OPERATIONAL RANGE
min 0°C / +35°F
max +32°C / +95°F
| STORAGE RANGE
min -20°C / +70°F
max +4°C / +158°F
PRECAUTIONS
Do not leave your product unattended when working where the general public
could be endangered. Keep out of the reach of children.
It is recommended that the equipment be removed from the support for
transportation. Do not clean the product with solvents, thinners, benzene, or
other corrosive products.
High temperature:
Avoid temperatures exceeding +70°C (158°F), and do not leave the controller
exposed to direct strong sunlight for an extended period, e.g. in a car parked
in a sunny place.
Electrical precaution:
Never use any battery, power supply, or accessory that is not specified by
this manual.
Never use any battery made or modified by yourself.
Non-replaceable batteries, contact the authorized technical service for
substitution.
Avoid exposing the product to heat sources, direct sunlight, fire, and/or
similar, to prevent dangerous overheating of the internal battery.
Do not insert metal objects or foreign bodies into the device, accessories,
connecting cables, and any mechanical and/or electrical and/or electronic part
of this product.
Do not scratch, cut, or excessively bend the cords, and do not put heavy
objects on them.
Do not use cables whose insulation is damaged.
To prevent compromising their insulation, do not leave cords close to any
heating source.
Do not dismantle nor modify the equipment if not explicitly allowed by
instructions.
Never touch the electrical contacts of the connecting cables, because they
could deteriorate, thus compromising operation.
DISCLAIMER
The information contained in this document is subject to change without notice. Vitec Imaging Solutions makes no warranty and shall not be liable for any errors on information contained in this document. Any changes or modifications not expressly approved by Vitec Imaging Solutions could void the user’s authority to operate this equipment.
INFORMATION FOR USERS
In accordance with Article 10 of Directive 2012/19/UE of 04/07/2012 concerning
Waste Electrical and Electronic Equipment (WEEE). The above symbol, also
present on equipment, indicates that, at such time as the user should decide
to dispose of the equipment, it must NOT be disposed of as unsorted municipal
waste, but must be
collected separately. The same applies to all components of the equipment and
any recharge or refill elements that the product may comprise. For information
on the waste
collection systems suitable for this equipment, contact Vitec Imaging
Solutions or any authorized member of the National Registers in EU countries.
Household (or similar) waste may be disposed of via standard municipal
differentiated waste collection schemes.
If you purchase a new version of this model or similar equipment – or if your
existing equipment measures less than 25 cm – you may return the items you no
longer require to your retailer who will take care of contacting the company
or organization handling the proper collection and management of used
equipment. The correct separate collection and specific treatment of WEEE are
necessary to avoid potential damage to human health and the environment and
favor the recycling and recovery of component materials. Improper or illegal
disposal of this product by the user will result in punishments or fines being
applied in accordance with national Decrees based on Directive 91/156/EC and
2008/98/EC.
Thank you for purchasing a JOBY product.
JOBY products are warranted to be fit for the purpose for which they have been
designed and to be free from defects in materials and workmanship. This
guarantee does not cover the product against subsequent damage or misuse. The
period of validity of the Standard Limited Warranty is defined by the law in
force in the country, state or region where the product is sold. Please retain
your receipt as proof of purchase to repair your product under warranty.
For After Sales Information visit joby.com
| twitter.com/jobyinc
---|---
| facebook.com/jobyinc
| instagram.com/jobyinc
| youtube.com/jobyinc
Vitec Imaging Solution Spa
Via Valsugana 100
36022 Cassola (VI) – Italy
© 2021 Vitec Holdings Italia Srl
JOBY is a registered trademark of Vitec Holding Italia Srl
Cod. 0500-221 – 03/21
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>