JOBY 897712 Wavo PLUS On Camera Microphone User Manual
- June 9, 2024
- JOBY
Table of Contents
Wavo™ PLUS
User Manual
Product Overview
1 Power button
2 Headphone volume knob
3 USB Type-C
4 Output gain selector
5 Audio output to camera| 6 Headphone jack
7 Power / Battery level indicator
8 Safe Track switch
9 Low-cut filter switch
---|---
JOBY Wavo PLUS User Warnings
Disclaimer
JOBY has made every effort to provide clear and accurate information in this
product guide, which is provided solely for the user’s information. While
thought to be accurate, the information in this document is provided strictly
“as is” and JOBY will not be held responsible for issues arising from
typographical errors or user’s interpretation of the language used herein that
is different from that intended by JOBY.
All safety and general information is subject to change as a result of changes
in local, federal or other applicable laws. JOBY reserves the right to revise
this Operation Guide and make changes from time to time in the content hereof
without obligation to notify any person of such revisions or changes. In no
event shall JOBY, its employees or authorized agents be liable to you for any
damages or losses, direct or indirect, arising from the use of any technical
or operational information contained in this document.
JOBY makes no guarantees for your recordings / images. In the event that
content was not recorded or images taken, due to a fault related to the device
during use, please understand that no compensation can be provided and JOBY
will not be held responsible in any way.
Copyright and trademarks
Copyright laws in your country may prohibit the use of recorded images of
people, places or other subjects for public or private enjoyment.
Also be aware that certain public performances, exhibitions or other events
may prohibit recording images.
© 2020 JOBY Ltd. All rights reserved.
JOBY, the JOBY logo and the Wavo PLUS logo are trademarks or registered
trademarks of JOBY Videndum Media Solutions and/or other countries.
All trademarks, trade names, icons, logos, written material, images, code, and
product names used in association with this product are copyrights,
trademarks, or other intellectual property exclusively owned and controlled by
JOBY Ltd.
JOBY Ltd also has patents pending. All other company, brand and product names
are trademarks or registered trademarks of their respective holders. JOBY has
no affiliation to, is not associated or sponsored with, and has no express
rights in third-party trademarks. Product warnings
Never use this product without fully understanding the functions and safety
precautions. See www.JOBY.com for operation guides.
WARNING: To reduce the risk of fire or electric shock, do not expose this
equipment to rain or moisture. To reduce the risk of fire or electric shock
hazard, keep this equipment away from all liquids. Use and store only in
locations which are not exposed to the risk of dripping or splashing liquids,
and do not place any liquid containers on top of the equipment.
WARNING: Always keep the product and all accessories including,
connection cable and all packaging out of reach of babies and small children
CAUTION: To reduce the risk of fire or electric shock and annoying
interference, use the recommended accessories only.
CAUTION: Do not carry, jar, swing, or shake the unit by any attached
accessories including cameras. Any strong jolt may damage the unit or result
in personal injury.
CAUTION: Danger of explosion or fire if battery is tampered with or
mistreated. Do not disassemble the unit to access the battery or dispose of
the unit and/or the battery in fire. Do not store the unit in temperatures
over 60 °C (140 °F) or below -20 °C (-4 °F). Do not expose the unit and/or
battery to excessive heat such as sunshine, fire or the like. Always use the
specified charger to recharge the battery.
CAUTION: This apparatus can only be charged from a 5V DC USB outlet ES1
PS2 power source.
CAUTION: Do not use or charge the device in temperatures below 0°C (32
°F), or above 35 °C (95 °F).
Important safety instructions
Read these instructions. Keep these instructions. Heed all warnings. Follow
all instructions.
– Clean only with dry cloth. – The Unit is a precision instrument. – Do not
drop it or subject it to physical shock. – Do not use this apparatus near
water. – The unit is not waterproof and cannot be used underwater. – If you
accidentally drop the device into water, promptly contact JOBY. – Wipe
off any water droplets with a dry cloth. – Never leave the device near
anything having a strong magnetic field such as a magnet or electric motor. –
Also avoid using or leaving the device near anything emitting strong radio
waves such as a large antenna – Do not leave the device in excessive heat such
as in a car or direct sunlight. – High temperatures can cause the device to
malfunction. – Never attempt to disassemble the device. – Avoid storing the
device where there are corrosive chemicals such as a darkroom or chemical lab.
– Do not use paint thinner, benzene, or other organic solvents to clean the
equipment. – Doing so may cause fire or a health hazard. – Do not use or
charge near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat. – Only use
attachments/accessories specified by the manufacturer. – Use only with the
slider, ballhead or support apparatus specified by the manufacturer, or sold
with the apparatus. – When apparatus are used, use caution when moving or
transporting to avoid injury from tip-over. – Refer all servicing to qualified
service personnel. – Servicing is required when the device has been damaged in
any way, such as power-supply cord or plug is damaged, liquid has been
spilled, objects have fallen onto the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
Preventing fire, excessive heat, chemical leakage, and explosions, follow the
safeguards below:
– Do not use any external batteries, power sources and accessories not
specified by JOBY.
– Do not use any home-made or modified external power supply or batteries. –
Do not short-circuit, disassemble, or modify the device or battery inside.
– Do not apply heat or apply solder to the internal battery or any attached
external devices. – Do not expose the device to fire. – Do not charge
unattended. – If excessive heat, smoke or fumes are emitted during recharging,
immediately unplug the battery charger from the power outlet to stop the
recharging and prevent a fire. – If the device leaks, changes color, deforms,
or emits smoke or fumes, remove it immediately. – Be careful not to get burned
in the process. –
Prevent any leakage from contacting your eyes, skin, and clothing. – It can
cause blindness or skin problems. – If the battery leakage contacts your eyes,
skin, or clothing, flush the affected area with lots of clean water without
rubbing it. – See a physician immediately. – During recharging, keep the
equipment away from the reach of children. – The cord can accidentally choke
the child or give an electrical shock. – Do not leave any cords near a heat
source. – It can deform the cord or melt the insulation and cause a fire or
electrical shock. – Do not use the device where there is flammable gas. – This
is to prevent an explosion of fire. – Do not store the equipment in dusty or
humid places.
INFORMATION FOR USERS
In accordance with Article 10 of Directive 2012/19/UE of the 04/07/2012
concerning Waste Electrical and Electronic Equipment (WEEE).
The above symbol, also present on equipment, indicates that, at such time as
the user should decide to dispose of the equipment, it must NOT be disposed of
as unsorted municipal waste, but must be collected separately. The same
applies to all components of the equipment and any recharge or refill
elements that the product may comprise.
For information on the waste collection systems suitable for this equipment,
contact Videndum Media Solutions or any authorized member of the National
Registers in EU countries. Household (or similar) waste may be disposed of via
standard municipal differentiated waste collection schemes.
If you purchase a new version of this model or similar equipment – or if your
existing equipment measures less than 25 cm – you may return the items you no
longer require to your retailer who will take care of contacting the company
or organization handling the proper collection and management of used
equipment.
Correct separate collection and specific treatment of WEEE are necessary to
avoid potential damage to human health and the environment, and favour the
recycling and recovery of component materials. Improper or illegal disposal of
this product by the user will result in punishments or fines being applied in
accordance with national Decrees based on Directive 91/156/EC and 2008/98/EC.
Thank you for purchasing a JOBY product.
JOBY products are warranted to be fit for the purpose for which they have been
designed, and to be free from defects in materials and workmanship. This
guarantee does not cover the product against subsequent damage or misuse. The
period of validity of the Standard Limited Warranty is defined by the law in
force in the country, state or region where the product is sold. Please retain
your receipt as proof of purchase to repair your product under warranty.
CERTIFICATIONS
EU
Manufacturer’s name : Videndum Media Solutions
Manufacture’s address : Via Valsugana 100, 36022 Cassola (VI), Italy
Product name : Wavo PLUS
Product code : JB01734-BWW
Simplified Declaration of Conformity
GB – Hereby, “Videndum Media Solutions” declares that the radio equipment type
“Wavo PLUS” is in compliance with Directive 2014/53/EU and
with Directive 2011/65/CE and its amendments.
The full text of the EU declaration of conformity is available at the
following internet address:
USA
FCC ID:
Declaration of conformity
NOTE: This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
No changes shall be made to the equipment without the manufacturer’s permission as this may void the user’s authority to operate the equipment”
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This device complies with the safety requirements for RF exposure for portable use conditions in accordance with FCC rule part 2.1093 and
KDB 447498 D01.
UNITED KINGDOM
RUSSIA – BELARUS – KAZAKHSTAN –
KYRGYZSTAN – ARMENIA
R-R-021- JB01734-BWW
After sales service: www.joby.com
HONG KONG
AUSTRALIA – NEW ZEALAND
TAIWAN
Wavo PLUS:
NCC approved device
SINGAPORE
CHINA CMIIT ID:
UNITED ARAB EMIRATES
Videndum Media Solutions Spa
Via Valsugana 100
36022 Cassola (VI) – Italy
© 2022 Videndum Media Solutions Spa
JOBY is a registered
trademark of Videndum Media Solutions Spa
Cod. 1080681 – 09/22
Documents / Resources
| JOBY
897712 Wavo PLUS On Camera
Microphone
[pdf] User Manual
897712 Wavo PLUS On Camera Microphone, 897712, Wavo PLUS On Camera Microphone,
Camera Microphone, Microphone
---|---