JOBY JB01642-BWW Swing Portable Electronic Smartphone Slider Phone Mount Kit User Manual

JOBY JB01642-BWW Swing Portable Electronic Smartphone Slider Phone Mount

Kit User Manual

JOBY JB01642-BWW Swing Portable Electronic Smartphone Slider Phone Mount

Kit

WARNING! &. ATTENTION I

Manually rotating, opening or closing the Swing can damage it and reduce its lifespan. Tourner manuellement, ouvrir ou Termer le Swing peut l’endommager et reduire sa duree de vie.

PAYLOAD max 600g I 1.321b

OPERATIONAL RANGE min 0°C / +32°F max +35°C / +95rF

STORAGE RANGE min -20°C / +4°F1 max +70°C / +1518°F

PRECAUTIONS

Do not leave your product unattended when working where the general public could be endangered. Keep out of the reach of children.
It is recommended that the equipment be removed from the support for transportation.
Do not clean the product with solvents, thinners, benzene or other corrosive products.

High temperature:

Avoid temperatures exceeding + 70°C (158°F}, and do not leave the controller exposed to direct
strong sunlight for any extended period, e.g. in a car parked in sunny place.

Electrical precaution:

Never use any battery, power supply or accessory that is not specified by this manual.
Never use any battery made or modified by yourself.
Non-replaceable batteries, contact the authorised technical service for substitution.
Avoid exposing the product to heat sources, direct sunlight, fire and/or similar, to prevent dangerous overheating of internal battery.
Do not insert metal objects or foreign bodies into the device, accessories, connecting cables and any mechanical and/or electrical and/or electronic part of this product.
Do not scratch, cut or excessively bend the cords and do not put heavy objects on them.
Do not use cables whose insulation is damaged.
To prevent compromising their insulation, do not leave cords close to any heating source.
Do not dismantle nor modify the equipment if not explicitly allowed by instructions.
Never touch the electrical contacts of the connecting cables, because they could deteriorate, thus compromising operation.

DISCLAIMER

The information contained in this document is subject to change without notice. Vitec Imaging
Solutions makes no warranty and shall not be liable for any errors on information contained in this document. Any changes or modifications not expressly approved by Vitec Imaging Solutions could void the user’s authority to operate this equipment.

INFORMATION FOR USERS

In accordance with Article 10 of Directive 2012/19/UE of the 04/07/2012 concerning ¾ Waste Electrical and Electronic Equipment (WEEE). The above symbol, also present on equipment, indicates that, at such time as the user should decide to dispose of the equipment, it must NOT be disposed of as unsorted municipal waste, but must be collected separately. The same applies to all components of the equipment and any
– recharge or refill elements that the product may comprise. For information on the waste collection systems suitable for this equipment, contact Vitec Imaging Solutions or any authorised member of the National Registers in EU countries. Household (or similar) waste may bedisposed of via standard municipal differentiated waste collection schemes. If you purchase a new version of this model or similar equipment – or if your existing equipment measures less than 25 cm – you may return the items you no longer require to your retailer who will take care of contacting the company or organization handling the proper collection and management of used equipment. Correct separate collection and specific treatment of WEEE are necessary to avoid potential damage to human health and the environment, and favour the recycling
and recovery of component materials. Improper or illegal disposal of this product by the user will result in punishments or fines being applied in accordance with national Decrees based on Directive 91/156/EC and 2008/98/EC. In accordance with Article 10 of Directive 2012/19/UE of the 04/07/2012 concerning ¾ Waste Electrical and Electronic Equipment (WEEE). The above symbol, also present on equipment, indicates that, at such time as the user should decide to dispose of the equipment, it must
NOT be disposed of as unsorted municipal waste, but must be collected separately. The same applies to all components of the equipment and any – recharge or refill elements that the product may comprise. For information on the waste collection systems suitable for this equipment, contact Vitec Imaging Solutions or any authorised member of the National Registers in EU countries. Household (or similar) waste may be disposed of via standard municipal differentiated waste collection schemes. If you purchase a new version of this model or similar equipment – or if your existing equipment measures less than 25 cm – you may return the items you no longer require to your retailer who will take care of contacting the company or organization handling the proper collection and management of used equipment. Correct separate collection and specific treatment of WEEE are necessary to avoid potential damage to human health and the environment, and favour the recycling and recovery of component materials. Improper or illegal disposal of this product by the user will result in punishments or fines being applied in accordance with national Decrees based on Directive 91/156/EC and 2008/98/EC.

Thank you for purchasing a JOBY product.

JOBY products are warranted to be fit for the purpose for which they have been designed, and to be free from defects in materials and workmanship. This guarantee does not cover the product against subsequent damage or misuse. The period of validity of the Standard Limited Warranty is defined by the law in force in the country, state or region where the product is sold. Please retain your receipt as proof of purchase to repair your product under warranty.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>